Euromac MBX 6 Plus 1250/30-2250

Euromac MBX 6 Plus 1250/30-2250

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Hnedpfxscc D Dde Abxjn Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.

Stanje: dober (rabljeno), Manufacturer: Ursviken Type: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for the production of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table & ram in X direction Extensive die set package with radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine embedded 2,350 mm below ground level Hnodpfx Aekvmi Sobxon Specifications: Metric | US Standard Capacity: 1,000 t Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (approx.): Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations shall be assumed. We recommend verifying all critical details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Tehnički podaci: Radna dužina: 6100 mm Razmak između stubova: 5230 mm Pritisna snaga: 400 t CNC upravljanje: OPERATOR II grafic TFT ekran 14" Broj upravljanih osa: 8 Upravljane ose: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Hod: 350 mm Izbačaj: 420 mm Snaga motora: 38,5 kW CE oznaka Dimenzije (dužina x širina x visina): oko 6300 x 2500 x 3600 mm Težina: oko 36,5 tona Napomena: Sto zalazi cca 450 mm u pod Oprema: 1 komplet alata: 1 gornji alat - udarni: 120 mm 1 segmentirana matrica: V50, V35, V22, V16 Stanje: vrlo dobro stanje samo 9.200 radnih sati u međuvremenu je mašina skladištena i sto demontiran Hjdpfey D Sb Usx Abxjnn Prodavac ne odgovara za greške u pisanju ili prenosu podataka. Mašina je, s obzirom na godine, u skladu sa svojim izgledom, tehnikom i habanjem; polovne mašine se prodaju bez ikakve garancije.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, številka stroja/vozila: HFE 220-3 N080201, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 24.330 h, moč: 20 kW (27,19 KM), vhodna napetost: 400 V, upogibna sila (maks.): 2.200 t, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, Oprema: centralizirani mazalni sistem, dokumentacija / priročnik, nujno zaustavitev, spodnje orodje, varnostna svetlobna zapora, zaščita prstov, zgornje orodje, Idealno za kovinsko proizvodnjo. Pravilno vzdrževan, pripravljen za uporabo! Podrobnosti in ogled po telefonu. Hjdpfx Aeyqvatebxjnn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, obratovalne ure: 4.937 h, stiskalna sila: 102 t, skupna masa: 7.200 kg, število osi: 8, This 8s AMADA HRB 1003 press brake was manufactured in 2023. It features a press force of 1000 kN and a stroke of 250 mm, making it suitable for a range of applications. With a weight of 7200 kg and equipped with the AMNC3i control system in Lite Mode, it offers advanced functionalities. Take advantage of this opportunity to purchase the AMADA HRB 1003 press brake. Contact us for further details. • Stroke: 250 mm • Voltage: 400 / 415 V • Frequency: 50 Hz • Phases: 3 • Installed power: 18.6 kW • Rated current: 29.8 A • Noise level: 72 dB(A) • Beam length: 3110 mm • Open height: 520 mm • Axes: 7 programmable • Control: AMNC3i with Lite mode • Configuration: Without crowning • Tool clamping: S-GRIP DUO Available tooling: - 3 Amada punches No. 831206, 835 mm long, and 1 split version - 3 Amada punches No. 820806, 835 mm long, and 1 split version Hodpfx Abeyk Dc Noxsnn Plus dies: - 3 pcs V 16 / H 120 / 85°, 835 mm long and 1 split version - 2 pcs V 16 / H 120 / 88°, 835 mm long - 3 pcs V 32 / 85°, 835 mm long and 1 split version - 3 pcs V 8 / V 12 / 88°, 835 mm long and 1 split version - 3 pcs V 16 / V 25 / 88°, 835 mm long and 1 split version - 3 pcs V 8 / V 12 / 30°, 835 mm long and 1 split version

Stanje: rabljeno, Leto izdelave: 2007, Na prodaj je izsekovalni stroj Amada EMK 3610NT skupaj z nakladalno enoto MP300. Stroj želimo prodati v kompletu z orodjem in brusilnim strojem Wilson X-Sharp. Standardna orodja so navedena v priloženem seznamu, ki ga lahko pošljem po e-pošti. Hodpfx Abow Hww Hexjnn

Leto izdelave: 2007, stanje: pripravljen za uporabo (rabljen), Rezanje okroglo: 560 mm, rezanje ploščato (ŠxV): 620x560 mm, dolžina enkratnega pomika materiala: 900 mm, večkratni pomik: 9999 mm, najkrajša dolžina odrezka: 6 mm, najmanjši premer za žaganje: 15 mm, min. ostanek pri posameznem rezu: 15 mm, najkrajši ostanek v avtomatskem načinu: 80 mm, moč žaginega motorja, frekvenčno uravnavana: 5,5 kW, hitrost rezanja, brezstopenjska: 13–127 m/min, dimenzije žaginega traku: 7400x54x1,6 mm, višina materiala na podpori: 700 mm, skupna vrednost pogona v osnovni opremi: 12 kW, dolžina: 2370 mm, širina: 3610 mm, skupne dimenzije s transporterjem sekancev (DxŠ): 2370x3610 mm, višina znižane mizne plošče: 2230 mm, teža: pribl. 5,2 t, s transporterjem sekancev. Ogled na lokaciji je mogoč. Hnjdpfx Abjxg Rhvjxon

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, prebijalna sila: 20 t, skupna masa: 12.000 kg, natančnost ponavljanja: 0,1 mm, CNC Turret Punching Machine MOTORUM-2048TS – New from Showroom ✅ CE Certification Included We are offering a CNC turret punching machine MOTORUM-2048TS, never used in production and in showroom-new condition. Key Features: Standard 44-station turret: 10 x XB, 16 x B, 6 x C, 4 x D, 1 x E, 1 x F, 1 x G, 1 x H (non-index) 1 set of type 114 punch holders for non-index stations Sliding die holders and urethane stripper for non-index stations 3 F-Index stations with dedicated type 114 punch holders Die holders and urethane stripper for each index station 1 standard Varitool-Z punch holder (12 stations), complete with die holder and urethane stripper (punches and dies not included) Additional Specifications: Brush system for sheet protection Material distortion detection during processing Slug suction unit for improved cleanliness Roller tool monitoring function Standard NC memory of 1,280 m Integrated read/write device (LAN, USB, Compact Flash) Technical Specifications: Punching force: 20 Ton Max sheet thickness: 6.35 mm Max sheet size: Without repositioning: 1,250 x 2,500 mm With repositioning: 1,250 x 5,000 mm Number of turret stations: 44 Power supply voltage: 200V, three-phase, 50/60Hz (Note: Step-down transformer for local network adaptation not included) Hjdpfjwx N Tdox Abxonn Condition: ✔️ New from showroom ✔️ Ready for delivery

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 500358, stružna dolžina: 1.250 mm, premer struženja: 300 mm, moč vretenovega motorja: 43 W, največja hitrost vretena: 5.000 obr/min, izvrtina vretena: 65 mm, INDEX G300L with Promot portal loader. The machine is still in production and under power. The Promot loader is equipped with 2 rotary indexing conveyors, each with approx. 30 pallet positions. The machine features high-pressure coolant supply (40 bar), a paper band filter, and a tool changer. Further information available by email. Hsdpfx Abou Nmq Hexonn

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, Pressure: 20.0 t Bending length: 850 mm Frame width: 850 mm Backgauge – adjustable: 375 + 400 mm Stroke of upper beam: 196 mm Installation height: 470 mm Approach speed: 200 mm/sec Table height: approx. 900 mm Total power requirement: 5.0 kW Machine weight: approx. 2,500 kg New price ~ EUR 85,000 Well-maintained / excellent condition (!!) Equipped with electromechanical direct drive (servo motor + ball screw spindles) Machine operates without hydraulic oil - Inspected/checked condition - Machine video - ?v=foxzKIA7vX8 Description: High performance, rapid travel speeds, and best-in-class ergonomics make this press brake a perfect tool with regard to productivity and accuracy. This enables exceptionally high productivity for small to medium-sized bent parts, as even complex bending sequences across multiple stations can be processed very quickly. Hnodjxacifopfx Abxen A wide range of varied and universally segmented tooling allows for an almost unlimited variety of applications. Equipment: - Rigid machine frame for both standing and seated operation - Deformation-optimized press beam - Highly dynamic electromechanical direct drive (servo motor + ball screw spindles) - CNC control with Panasonic Toughbook including USB and WIFI connection - CNC controlled axes: Y + X + R + Z1 + Z2 - CNC control unit front right, swiveling - Inductive length measurement system with temperature compensation - Ergonomic machine design - AMADA system upper tool holder - AMADA system lower tool holder - 1x brand new universal tool set (complete) - Front safety system (DUAL Laser/Iris Rapid Bend) - Rear safety guard - Laterally swiveling protective doors - 2x footswitches, for both standing and seated operation - Comfort support tables (front) - Original operating manual * Special accessories included: - 4-axis backgauge (axes X+R+Z1+Z2) * X-axis speed: 250 mm/sec * R-axis speed: 600 mm/sec * Z-axis speed: 1100 mm/sec * X-axis positioning accuracy: 0.04 mm * R-axis positioning accuracy: 0.06 mm * X-axis travel: 375 + 400 mm * R-axis travel: 180.0 mm