Mobilna odsesovalna naprava / mobilni odpraševalnik

ESTA WHISPERSOG 3.0 FM

Stanje: rabljeno, Leto izdelave: 2021, skupna masa: 200 kg, vhodna napetost: 400 V, skupna širina: 800 mm, skupna dolžina: 1.350 mm, skupna višina: 1.500 mm, volumenski pretok: 216 m³/h, potrebna višina: 1.500 mm, potrebna širina: 800 mm, zahteva za prostor dolžina: 1.350 mm, filtrirna površina: 2 m², negativen tlak: 31.500 Pa, moč: 3 kW (4,08 KM), transportna višina: 1.500 mm, transportna dolžina: 1.350 mm, transportna širina: 800 mm, kapaciteta rezervoarja: 80 l, No. 04520 Mobile Extraction System / Portable Dust Extractor ESTA WHISPERSOG 3.0 FM Unused, year of manufacture 2021, in as-new condition Industrial vacuum cleaner for cleaning tasks and machine extraction The high-vacuum cleaners WHISPERSOG operate more quietly than conventional industrial vacuum cleaners, while offering the same performance. They are designed for continuous operation and can be used not only as industrial vacuum cleaners, but also as mobile dust extractors for direct extraction from machines. The use of permanent filter cartridges can significantly reduce operating costs compared to disposable filters. The collected dust can be easily disposed of using the patented tilting device. Predpfoylb Ixox Anpoc Application areas: Removal of coarse, fine, and free-flowing dust during cleaning tasks / direct extraction from machines in continuous operation Drive power 3 kW Electrical connection 400 V Maximum negative pressure 31,500 Pa Maximum air flow rate 216 m³/h Extraction nozzle diameter 50 mm Filter area 2 m² Dust collection container 80 liters Potential-free contact for automatic start when the machine is switched on Including power cable with 16 A plug, cable for potential-free connection, and technical documentation Transport dimensions approx. 1350 x 800 x 1500 mm (LxWxH) Weight approx. 200 kg To avoid misunderstandings, an on-site inspection by appointment is possible and recommended Sale in as-is condition Technical data, condition description, year of manufacture and scope of delivery as per manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines any warranty is excluded; it applies: "purchased as inspected" Payment terms: Prices plus statutory VAT, payment prior to collection or dispatch Delivery terms: ex stock

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: Pedpfouiy Ngsx Anperc - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Leto izdelave: 2012, stanje: zelo dobro (rabljeno), Window production line WEINIG consisting of: Prsdpfx Ansh H Iyxjpsc Machining center Unirex 3000 Univar 15 Unitex 15

Stanje: pripravljen za uporabo (rabljen), Width: 1000 mm Length: 1500 mm Plate height: 195 mm Support leg height: 600 mm Podogq Nawopfx Anpjrc Total height, working height: approx. 800 mm Weight:

Leto izdelave: 2024, stanje: novo, Voziček za manipulacijo in shranjevanje velikih kril/okvirjev COMALL CARR 900-93/15 Q, novo Prodpom H Twgjfx Anpsc Tehnične značilnosti: - Kontaktne površine prevlečene z materialom iz plastike, ki je odporen na praske in udarce - Največja višina kril/okvirjev: 2500 mm - 16 parov stebričkov - 15 prekatov z uporabno širino 93 mm - 4 kolesa Ø 125 mm, od tega 2 z zavoro - Nosilnost: 850 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Število motorjev: 1 kos Delovna dolžina: 2500 mm Nadzor: ne Hecht ES 350, enostranska žaga za steklene profile Prjdsvpr N Rjpfx Anpoc ----- Nagibanje s pomočjo pnevmatskega sistema proti fiksnim oporami. 45º/90º/135º z pnevmatskim podajanjem žaginega lista pnevmatsko nagibanje s pomočjo ročnega nagibnega sistema z osnovo stroja, pnevmatsko napenjanje Žagin list HM 350 x 3,0/2,2/30 Z 100 Mere stojala žage: dolžina 700 mm, globina 1600 mm, višina 1500 mm Nastavljiva opora 1,5 m Podpora 1,5 m s podstavkom Nastavljiva opora 3 m Podaljšek podpore od 1,5 m na 3 m s podstavkom Vložki mize z utori za obdelane steklene profile HECHT ASB, ročna dolžinska opora z digitalnim prikazovalnikom, 2500 mm Z napravo za odsesavanje (tehnični podatki po navedbah proizvajalca – brez jamstva!)

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Prjdpfx Asfyadbenpec Technical specifications: • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Stanje: novo, Saw blade diameter 350 x Ø 30/40 mm Cutting diameter 135 mm Cutting length 430 mm Saw blade dimensions 350x3.0/2.4x40 mm Speed 3800 rpm Extraction port diameter 100 mm Total power requirement 3.0 kW Machine weight approx. 100 kg Space requirement approx. 1300 x 800 x 1600 mm - Cross-cut and mitre circular saw for cross-cutting operations - Double-sided mitre adjustment (60° / 45°) with fixed stops - One-sided compound cut up to 45°, with fixed stop - Robust cast iron construction - Precision linear ball bearing guide for the tool carriage on hardened and ground steel shafts - Manual saw feed - Saw blade height infinitely adjustable Pjdoxabqzepfx Anpsrc - Port for optional dust extraction Cutting data: - Cutting length at 90° = 430 mm - Cutting height at 90° = 135 mm - Cutting length at 45° = 310 mm - Cutting height at 45° = 92 mm Special accessories included: - 1x TCT circular saw blade 350 x 3.0/2.4 x 40 mm * Z = 108 FTZ negative for aluminium and plastic - Hydraulic feed brake, infinitely adjustable - Pneumatic material clamping from above, consisting of: * 2 vertical clamping cylinders, adjustable with hand lever valve - 1x machine stand - More powerful drive motor (3.0 kW)

Stanje: novo, Leto izdelave: 2025, - Capacity: 4 mm - Hydraulic roller adjustment Pjdpfjq Tdm Asx Anperc - Foot control - Brake motor - Hydraulic pressure adjustment - Equipped with 3 sets of rolls - Emergency stop - 400V

Leto izdelave: 2024, stanje: novo, Voziček za prevoz kril in okvirjev COMALL CARR 600 - 85/9 Q, nov Tehnične specifikacije: - 9 prekatov z delovno širino 84 mm - Kontaktne površine prevlečene z nedrsečo in udarno odporno plastično maso - Valjčki za prevoz kril - 4 kolesa Ø 125 mm, od tega 2 z zavoro - Nosilnost: 560 kg Prjdelfargepfx Anpec - Pakiranje v kartonu