Priklopnik sedeža z delovno ploščadjo

ES-GE 3-Achs Sattelanhänger -Bordwände

Stanje: novo, skupna masa: 43.000 kg, konfiguracija osi: 3 osi, Oprema: ABS, You can find our complete range of vehicles with immediately and short-term available units on our website. Extract from the equipment. Complete equipment list available on request. Chassis: * Welded construction made from high-quality steel profiles with continuous cross members, designed for high point loads Dkodpfxow U H Sbj Ag Nsu * Underrun beam approx. 700 mm wide * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm * Neck height at the front approx. 130 mm Coupling Equipment * 2-inch king pin Underrun Protection * Bolted version according to EC regulations Side Impact Protection * According to EC regulations, made from anodised aluminium profiles Landing Legs * 2 x 12 t landing legs with compensating pads and single-side operation on the right (FR) Axles * 3 x 9 t air suspension axles with disc brakes, 22.5" * Total lift approx. 180 mm * Lifting and lowering device via rotary valve Brake System * Two-line air brake system according to EC regulations with EBS and RSS, automatic load-dependent control * Spring-actuated cylinders as parking brake * Reversible coupling heads, fixed to the front cross member, without connecting line to the tractor unit Tyres * 6 units, 385/55 R22.5 160J on steel rims 11.75 x 22.5 ET 120, manufacturer at our discretion * Tyre pressure monitoring (TPMS) via EBS CAN-bus system Mudguards * According to EC regulations Spare Wheel Carrier None Load Securing * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 5.0 t * 9 pairs of folding lashing rings, evenly distributed, tensile strength approx. 2.0 t * In the outer frame, boreholes every approx. 400–600 mm for attaching lashing straps Front Wall * Reinforced steel construction, fixed, approx. 1,400 mm high * Interior lined with approx. 9 mm phenolic plywood (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the outer frame with galvanised omega steel profiles Lighting System * According to EC regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED outline lights rear * Licence plate lights * Lane marker lights, LED * 1x15- and 2x7-pin plug sockets at the front cross member Equipment * 2 wheel chocks with holders * ECE 70 warning signs * Bracket for rotating beacon, incl. rotating beacon * 2 rear rubber buffer stops * Access ladder rear right, foldable and extendable (without platform) * 1 open perforated box transverse to the direction of travel, approx. 600 x 450 x 2,430 mm, galvanised, behind the axles Paintwork * Front wall: single-colour RAL as per request * Chassis: hot-dip galvanised * Outer frame: hot-dip galvanised + single-colour RAL as per request * Centre stanchions: single-colour RAL as per request * Side underrun protection: aluminium, anodised * Underrun protection: white (RAL 9016 traffic white) * Attachments: galvanised/KTL black * Rims: silver Contour Marking * Complete, yellow Including Special Accessories * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stanchion pockets in the outer frame, evenly distributed * 4 rows of stanchion pockets transverse to the loading area * 20 stanchions made of galvanised tube 80/50, overall length approx. 1,200 mm * Internal magazine for 20 plug-in stanchions on the front wall * 5 x 25 sideboards and tailboard made of anodised aluminium hollow profiles, foldable and removable * Removable Kinnegrip stanchions * Sideboard and stanchion magazine: insertion

Stanje: novo, skupna masa: 39.000 kg, največja dovoljena obremenitev: 32.340 kg, konfiguracija osi: 3 osi, skupna širina: 2.550 mm, Oprema: ABS, You can find our complete vehicle inventory with immediately and soon available vehicles on our website. Excerpt from the equipment. Full specification on request. Chassis: * Welded construction made from high-quality steel profiles with punched profile cross-members, designed for high point loads Towing device: * 2-inch king pin Landing legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right in driving direction Axles: * 3 x 9 t air suspension axle units * Disc brakes * Manufacturer: SAF, with disc brakes approx. 430 x 45 mm * ABS * Centrally aligned wheel studs, 10-hole with ET 120 * Total air suspension travel approx. 200 mm, of which raise approx. 140 mm and lower approx. 60 mm, controlled by rotary slide valve with detent function Brake system: * Two-line compressed air brake system according to EU regulations with EBS and RSS, automatic load-dependent control * Spring actuators as parking brake * Non-interchangeable coupling heads securely mounted to the front cross-member, without connecting line to the tractor unit Tyres: * 6-x 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120, manufacturer of our choice Mudguards: * According to EU regulations, ? PVC mudguards in front of and behind the axle units Spare wheel carrier: * 1 piece double basket with mounting material for one spare wheel with ET 120 Load securing: * 9 pairs of folding lashing rings, evenly distributed, traction approx. 8.0 t * 8 pairs of folding lashing rings, evenly distributed, traction approx. 2.5 t * In the outer frame approx. every 500 mm a hole for tie-down straps Front wall: * Reinforced steel structure, fixed * Interior lined with approx. 9 mm phenolic-coated plywood (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor recessed in the outer frame Lighting system: * According to EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights white front * LED contour lights rear * Licence plate lights * 1x 15- and 2x 7-pin sockets at the front cross-member Equipment: * ECE 70 warning plate * Bracket for rotating beacon (without beacon) Painting: * Chassis and front wall sandblasted, primed, and painted in one colour * Chassis: RAL 3002 carmine red * Dropsides: anodised * Dropside stanchions: RAL 3002 carmine red * SSV: Aluminium anodised * Hubs: Cataphoretic dip primed (KTL) * Rear underrun guard: white (RAL 9010) * Mounted parts: galvanised/KTL black * Rims: silver Dsdjwx Db Aepfx Ag Noku Accessories: * First axle liftable, with fully-automatic, load-dependent lift control * 10 pairs of stanchion pockets in the outer frame, evenly spaced * 4 rows of stanchion pockets across the loading platform * 20 stanchions made of galvanised tube 80/50, total length approx. 1,000 mm * Magazine for 20 plug-in stanchions inside front wall * Dropsides: 5 x 250 mm aluminium hollow profile dropsides and rear wall, anodised, foldable and removable, detachable Kinnegrip stanchions * Dropside and stanchion magazine: left and right under chassis slide-in rails for dropsides and stanchions * Container locks for 1 x 40? and 2 x 20? containers rear flush, container locks for 1 x 20? container in the middle * Worklight at lamp bracket * 2 stainless steel toolboxes, approx. 600 x 500 x 500 mm * Air suspension Safety: ABS * EBS * Disc brakes Extras: Rental possible