Večvretenska orodja

ERGOMAT TBA 42

Stanje: rabljeno, Leto izdelave: 2006, Artikel: Stružnica Blagovna znamka: Ergomat Dsdpoyzpi Refx Af Ssur Tip: TBA-42 Leto izdelave: 2006 Stroj je bil izključno v pogonu z oljem (brez emulzije) in namenjen zgolj obdelavi medenine. Revolverska glava trenutno ni delujoča. Verjetno je treba zamenjati senzor. Vključuje IEMCA polnilni magazin BOSS 545 E, tip 32 N. Za dodatne informacije in slike nas kontaktirajte preko mail(at) ali

Stanje: zelo dobro (rabljeno), Odlično ohranjen šest vretenski stružni avtomat INDEX MS 25 s šetimi prečnimi on šestimi vzdolžnimi vodili orodij. Cena je po dogovoru glede na izbrano dodatno opremo: vpenjalne stročnice, orodja, transporter odrezkov itd. Dujdpfxjqhkukj Af Ser Stroj še obratuje v proizvodnji. Po dogovoru možen ogled.

Leto izdelave: 2026, stanje: kot nova (razstavni stroj), Parts Cleaning Machine / Spray Cleaning System Type TR450 The spray-rotation cleaning system type TR450 is an automated cleaning and degreasing unit featuring a lid that opens easily upwards. The system is designed for cleaning single parts and/or bulk materials in baskets sized LxWxH 520x320x200h mm. During the cleaning process, the basket must be closed with a lid. The cleaning result depends on a slight tumbling motion of the parts within the basket when cleaning bulk material; the fill level in the basket must be observed accordingly. Additionally, the unit is equipped with a flood tray beneath the goods basket, allowing for immersion rinsing of the parts, thereby achieving an even better cleaning result. Including the following features: • Fully made of stainless steel 1.4301, inside and outside Dusdpfx Afofbt Sio Ser • Level monitoring and automatic fresh water refill • Full system insulation • Hot air drying (power: 11.6 kW) • Steam vapor extraction • Oil skimmer for bath maintenance • Automatic fresh water refill • 1 small parts basket, 520x320x200h mm, mesh size: 6x6 mm, with height-adjustable locking lid Connected load: approx. 20 kW (32 amp plug)

Stanje: rabljeno, Leto izdelave: 2007, TECHNICAL DATA Travel range X 760 mm Travel range Y 510 mm Travel range Z 610 mm Table clamping surface 1020 x 510 mm T-slots / table 5 x 18 mm x 100 mm Distance spindle to table min./max. 150/762 mm Dujdpfx Afswud Afe Ssr Spindle taper steep taper DIN 69871 ISO 40 Spindle speeds 10 – 10,000 rpm Drive power (30 min/continuous duty) 11 kW Max. torque 236 Nm Constant power from 500 rpm Coolant tank 190 l Ball-bearing linear guides on X, Y, Z axes Rapid traverse X / Y / Z 30 / 30 / 20 m/min Feed rates programmable 3.0 – 7,600 mm/min Positioning accuracy +/- 0.01 mm Repeatability +/- 0.005 mm Automatic tool changer (double arm) 24 Internal coolant supply Chip conveyor

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 4.500 h, Funkcionalnost: nepreverjeno, številka stroja/vozila: 090119, Country of manufacture: CE – Germany Voltage: 400V Net weight: 7,500 kg Dimensions: 2.9 x 2.3 x 2.3 m Operating hours: 29,731 h – Working hours: 4,500 h TECHNICAL DATA AXES Maximum travel X-axis: 400 mm Maximum travel Y-axis: 300 mm Maximum travel Z1-axis: 475 mm Maximum travel Z2-axis: 475 mm Rotational range B-axis: 0.0001 – 360° Rotational range C1/C2-axis: 0.0001 – 360° WORKPIECE Maximum cubic dimension: 80 x 80 x 80 mm Maximum weight: 5 kg TURRET HEAD Number of stations: 24 Number of driven stations: 18 Number of static stations: 6 Maximum tool holder (round): Ø 20 mm Maximum tool holder (square): 16 x 16 mm (20 x 20) Maximum turret head path above tool tip: 500 mm Speed of rotating tools: 1–9,000 rpm SPINDLE Maximum speed: 6,000 rpm Maximum bar diameter: Ø 42 mm Maximum clamping chuck diameter: 140 mm BAR MACHINING Maximum bar length for bar feeder: 1,000 mm Maximum workpiece size for bar gripper: Ø 42 x 100 mm Maximum diameter for collet gripper: 42 mm Clamping cylinder pull/push force: 20,000 N FEED DRIVES Feed force X-axis: approx. 895 daN Feed force Y-axis: approx. 895 daN Feed force Z1-axis: approx. 895 daN Feed force Z2-axis: approx. 895 daN Rapid traverse X/Y/Z axes: 20 m/min Tool control motor torque: 2.4 Nm Spindle S1 / Spindle S2: 70 Nm COOLING (Performance rate) Chip conveyor submersible pump output: approx. 10 l/min at 4.5 bar      80 l/min at 3.2 bar      150 l/min at 0.7 bar High-pressure pump (in conveyor): 10 l/min at 13.2 bar      50 l/min at 9 bar      90 l/min at 1 bar Lubrication volume in chip conveyor: approx. 134 L Coolant volume in cooling unit: 45 L CONTROLLER: Siemens 840D WORKING PRECISION Resolution X/Y/Z: 0.1 µm Resolution B-axis: 0.0001° Resolution C-axis: 0.0001° Positioning accuracy: 5 µm Repeatability: 0.6 µm Max. runout error: 0.5 µm ELECTRICAL Spindle 1 / Spindle 2 (at 100%): 11 kW Spindle 1 / Spindle 2 (at 40%): 15 kW Feed motor X/Y/Z1/Z2: 1.3 kW B-axis: 1.3 kW Tool control: 2.3 kW Hydraulic pump: 7.5 kW Hydraulic return: 0.75 kW Cooling unit fan 1 / 2: 0.18 kW Cooling unit circulation pump: 1.1 kW Cooling unit compressor: 2.2 kW Chip conveyor: 0.25 kW Emulsion pump 1: 1.1 kW Emulsion pump 2: 2.2 kW Control voltage: 400 V Dusdpeht Hg Dsfx Af Sjr Network frequency: 50Hz (60 optional) Control voltage: 24V DC Total power: 35 kW Nominal current: 63A Connection: TM / TT / IT grid PNEUMATICS Maximum operating pressure: 10 bar Normal operating pressure: 6 bar Minimum operating pressure: 5 bar Air output: approx. 150 L/min Valve voltage: 24V DC Oil mist tank capacity: 12 L Quality standard: 2 according to Pneurop6611 NOISE EMISSION Normal operation: 78–80 dB Technical data subject to change; errors and omissions excepted Inventory No. 2321018; machine configuration: - Chip conveyor - Prepared for bar feeder installation Tool holders: - 6 fixed drill holders ER32 - 8 turning tool holders - 5 powered tool holders ER32 - 4 powered tool holders ER25 - 6 powered tool holders ER20

Stanje: dober (rabljeno), Thread cutting machine Hahn und Goebel HG 12E Spindle speed: 180-900 rpm 380V Machine No. 1917/16 Dodpfed Rkbrex Af Sour Thread range: M4-M65

Stanje: novo, Connection voltage: 230 V Dujdpsvu Hccjfx Af Ser Battery: 24V / 100Ah Brush diameter: 510 mm Rotation speed: 175 rpm Vacuum airflow: 24 L / s Tank capacity: 50 / 50 litres Weight: 160 kg Dimensions (L x W x H): 1,100 x 520 x 1,000 mm KREMER floor cleaning machine: Supplied with battery and charger Theoretical area performance: Output: 2,000 m²/h Suction width: 850 mm Cleaning width: 510 mm Max. working area gradient: 2 % Clean/dirty water tank capacity: 50 / 50 L

Stanje: dober (rabljeno), Leto izdelave: 2006, Obdelovalni center Hurco VMX 30 s Kitagawa 4. osjo, IKZ, NC primež 125, različni nosilci orodij, dobro vzdrževano stanje Djdpfx Afsxrcnle Sjur

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Control: Siemens Sinumerik 828D with ShopMill Travel paths X/Y/Z: 1020 x 635 x 610 mm Spindle speed: 10,000 rpm Tool magazine for 24 tools, SK 40 Internal coolant supply (IKZ) Chip conveyor Measuring probe Duedpfx Ajvtcyuof Ser

Leto izdelave: 1981, stanje: rabljeno, Manufacturer: Deckel Model: FP 4 Table: Dimensions: 1000 x 470 mm Longitudinal travel (X-axis): 700 mm Cross travel (Y-axis): 400 mm Vertical travel (Z-axis): 450 mm Spindle overhang: 50–450 mm Spindle taper: ISO 40 Number of spindle speeds: 18 Spindle speed range: 31.5–1600 rpm Number of horizontal spindle speeds: 18 Horizontal spindle speed range: 31.5–1600 rpm Duodpsihp U Djfx Af Ssr Machine weight: 2000 kg Feed rates X/Y/Z axes: 18 steps, 10–500 mm/min Accessories: Milling head with quill Table size: 1000 x 470 mm