CNC stružno-rezkalni center

EMCO MT 65 G2

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 8038938456C, stružna dolžina: 450 mm, premer struženja nad prečnim suportom: 505 mm, premer struženja: 202 mm, moč vretenovega motorja: 10.000 W, največja hitrost vretena: 6.000 obr/min, izvrtina vretena: 51 mm, Gildemeister CTX 310 Hedpfx Agswk E Uzsxel Heidenhain Turn+ Stroj je popolnoma funkcionalen, vendar ima manjšo napako.

Stanje: dober (rabljeno), Leto izdelave: 2000, širina mize: 1.000 mm, dolžina mize: 1.800 mm, širina plošče bata: 600 mm, skupna dolžina: 25.000 mm, skupna širina: 27.000 mm, skupna višina: 47.000 mm, skupna masa: 43.000 kg, hod blazine orodja: 200 mm, Siemens Simatic OP 27 control system Hodpfxetiwgis Agxol Sick light barrier Separate Rittal control cabinet Side walkways/access passages Floor-level installation

Stanje: rabljeno, Leto izdelave: 2005, Obratovalni premer 290 mm Hsdpfx Agjyb S Ihexel Obratovalna dolžina 300 mm Krmiljenje Heidenhain Premer vrtenja nad ležiščem 380 mm Skupna potrebna moč --- kW Teža stroja ca. --- t Potreben prostor ca. --- m Gildemeister CTX 2100 - 2005 s C-osjo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Hedpfx Agsw Hg Nljxjl Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 116 h, nosilnost: 4.000 kg, dvižna višina: 17.000 mm, vrsta goriva: dizel, tip droga: teleskopski, moč: 85 kW (115,57 KM), lastna masa: 13.040 kg, vrsta pogona: Diesel, Rigid telehandler Mast type: Telescopic Speed class: 20 Technical condition: New Front tires type: Pneumatic Front tires size: 400/70-24 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 400/70-24 Hsdjv Ezt Dspfx Agxol Rear tires condition: 80 - 100% 3rd valve, 4th valve, heating, full cab, CE certificate Specifications: - Lifting capacity 4000 kg - Lifting height 16.4 m - Max. gradeability 40% - Unladen weight 13,040 kg - Engine KUBOTA 85.1 kW ( 114 HP ) - Displacement 3,769 cm³ - Emission standard Tier 4f - Steering: front wheel steering, all-wheel steering and crab steering.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, approx. 4.5 m long feed and centering table drive via chain from feed motor centers the roundwood in the middle of the rotor debarking machine VK 26 4 main cutters 4 pre-cutters 30 kW main motor 11 kW feed unit non-driven outfeed table Hedpfsu Hmacex Agxel machine workshop inspected machine cleaned and newly painted

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Hedpot Hw Iiefx Agxjl Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center (Multi-Function Machine) | Manufacturer: MAZAK Model: INTEGREX e-650H II | Year of manufacture: 07/2009, Commissioning: November 2009 The machine can be inspected under power by appointment. Condition: Fully functional / ready for operation. Operating hours (as of 10.03.2026): - Total: 91,430 h - Automatic operation: 52,054 h - Automatic machining: 38,974 h - Manual machining: 31,316 h TECHNICAL DATA: Working area: - Max. swing diameter: 920 mm - Max. swing diameter over tool slide: 920 mm - Max. turning diameter: 1,100 mm Main spindle: - Max. speed: 1,600 rpm - Min. speed: 35 rpm - Spindle bore: 260 mm (1,000 rpm) - Spindle nose: A2-11" - Internal spindle bearing diameter: 220 mm Hodpsyuq Dzofx Agxel - Rated power (30 min. operation / 100% continuous operation): 45.0 / 37.0 kW - Max. torque: 4,500 Nm Programmable tailstock: - Taper: MT 6 Milling spindle: - Turret type: Single spindle with ATC - Tool shank: steep taper 50 - Max. tool diameter: 260 mm - Max. tool length: 500 mm - B-axis indexing increments: 0.0001° - B-axis positioning for turning - Min./max. milling spindle speed: 35 - 10,000 rpm - Milling spindle motor, AC: 37 kW Travel distances: - X-axis: 1,025 mm - Y-axis: 650 mm - Z-axis: 6,423 mm - B-axis swivel range: 240° Dimensions: - Spindle center height: 1,350 mm - Length: 13,267 mm - Width: 3,938 mm - Height: 3,920 mm - Weight: 41 t Additional Information: - Rated power (100% continuous operation): 99.5 kVA Automatic tool changer: - Number of tools: 120-station, SK50 DIN 69871 EQUIPMENT / SPECIAL ACCESSORIES: - CNC control: MAZATROL MATRIX - Further high-quality special equipment ... - Documentation - CE marking No guarantee for completeness or accuracy of technical data and equipment features. Subject to prior sale. Detailed technical datasheet and information on equipment available on request.

Stanje: zelo dobro (rabljeno), CPM 2000 granulator, 90 kW motor, 410 mm die diameter. We have several units available. Hsdewcdpnspfx Agxol

Leto izdelave: 2002, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Барабанная сушилка для опилок и щепы с производительностью до 15 т/ч. Hjdpfx Aovx S Hnjgxsl Состояние – полностью рабочая.