2 x 50 m³ aluminijasta silosa ø 3.000

Eichholz

Leto izdelave: 1999, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 2 x 173 m³ Stainless Steel Storage Silos (Material: 1.4301) (formerly used as plastic granulate silos) Technical Data / Dimensions Available units: 2 Volume: approx. 172,000 liters Container type: Silo Condition: Used Design: Vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 21,000 mm Total height: approx. 17,500 mm Weight: approx. 9,000 kg Specific gravity of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 500 mm Material / Specification Inner shell material: Stainless steel Note: Material grade 1.4301 Support type: Foot ring/base skirt Top head type: Conical top Inclination: approx. 15 % Bottom type: Cone Cone angle: 60 degrees Top Section: 1 x perimeter roof railing, height: approx. 1,200 mm 1 x walkway with handrail 2 x crane lifting lugs 1 x manway DN 600 1 x connection flange for level measurement 1 x welded nozzle for full-level switch 1 x flange DN 100 (for filling) Fsdpfx Ajxvtvuohmegc 1 x vent with hood Shell: 1 x operating door (approx. 1,800 x 850 mm) 1 x cable protection conduit 1 x fill line DN 100, ending in TW coupling 1 x welded adapter for empty-level sensor Bottom Section: The silos end in a 60° cone at the bottom, fitted with an emergency shut-off valve and a mounted suction box (see photos) A three-section access ladder with back protection and rest platforms is optionally available.

Stanje: rabljeno, Leto izdelave: 2007, Pressure: 100 t Stroke: 500 mm Fgsdpfjvprv Rex Ahmoc Table surface: 900 x 600 mm Rapid traverse: 22 mm/s Stroke speed: 2 mm/s Ram surface: 700 x 350 mm Total power requirement: 2.2 kW Machine weight: approx. 1.6 t Required space: approx. 1.9 x 0.85 x 2.3 m Hydraulic workshop press This machine is the Italian make SICMI, which was distributed by Knuth.

Stanje: dober (rabljeno), Leto izdelave: 2014, Ref.-No.: 18636 Manufacturer: EICHHOLZ Type: OCTABIN TIPPER & MATERIAL FEEDING SYSTEM Year of Manufacture: 2014 Additional Information: WHAT IS AN OCTABIN TIPPER? An octabin tipper is an industrial automation system designed for the controlled and safe emptying of plastic granulate or regranulate from high-capacity octabin containers. The octabins are loaded by forklift and are then precisely lifted and tipped using a hydraulic or chain-driven lifting system. The material is discharged into the lower hopper from where it can be conveyed directly into the production line via vacuum or dosing systems. This system is primarily used in plastics injection moulding and extrusion operations to reduce manual labour, accelerate production processes, and ensure safe material handling. FOR SALE: OCTABIN TIPPER + MATERIAL FEED SYSTEM For sale is one heavy-duty industrial octabin tipper/material discharge system. The system was removed from a running plastics production environment and is in clean and orderly condition. The unit is designed for the controlled discharge of plastic raw materials from large octabins and facilitates transfer to central material feed systems. The plant is equipped with high-quality industrial components from Aerzen, Rittal, Omron, and DMN Westinghouse. BRANDED COMPONENTS OF THE PLANT Aerzen Vacuum/Blower Unit (Germany) Aerzen is one of the world’s most renowned German manufacturers in the field of industrial blower and vacuum technology. Technical Specifications • Brand: Aerzen • Model: GM15L • Year of Manufacture: 2014 • Delivery Capacity: 12.50 m³/min • Motor Power: 11 kW • Max. Pressure: 1.25 bar • Operating Pressure: 1.0 bar • Weight: approx. 626 kg Advantages • Premium German technology • Suitable for continuous industrial operation • Reliable and low-maintenance • Ideal for central vacuum systems Rittal Industrial Control System The unit features a Rittal electrical control cabinet. Rittal is a global premium manufacturer in the field of industrial and automation technology. Features • Industrial-grade control cabinet • Operator control and monitoring system • Safety circuits • CE-compliant design Omron Safety Sensors The machine is equipped with Omron safety sensors. Features • Industrial safety barriers • Operator protection system • Monitoring of the working area • Compatible with automation systems Fedjy Tliwepfx Ahmsgc DMN Westinghouse Rotary Valve System A DMN Westinghouse rotary valve is installed at the lower hopper outlet. DMN Westinghouse is a global leader in bulk material handling and feed systems. Technical Data • Brand: DMN Westinghouse • Model: ALD 200-6 • Controlled and low-dust material transfer • Suitable for granulate and bulk material applications Advantages • Controlled material flow • Reliable continuous operation • Suitable for central feed systems

Leto izdelave: 2007, stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, 5 x 148 m³ aluminium silo (plastic granulate silo) Technical specifications / Dimensions Available quantity: 5 Year of manufacture: 2007 Volume: approx. 148,000 liters Type of vessel: silo Condition: used Suitable for food: no Design: vertical Internal diameter: approx. 3,500 mm Cylindrical height: approx. 14,900 mm Total height: approx. 17,500 mm Weight: approx. 3,500 kg Specific weight of medium: 0.6 t/m³ Operating pressure: non-pressurized Ground clearance: approx. 770 mm Material / Construction Inner shell material: aluminium Notes: Material: AlMg3 / AlMgSi3 Support design: support ring/base frame Top head type: conical top Inclination: approx. 15% Bottom type: cone Cone angle: 90 degrees Top head: - 1 x roof perimeter guard rail, height: 1,200 mm - 1 x access walkway with handrail - 2 x lifting lugs - 1 x manhole DN 600 with mounted vent nozzle - 1 x connection flange for level sensor - 1 x nozzle for full detector Fsdpfx Aoxqr Ekjhmogc - 1 x flange DN 100 (filling) Shell: - 1 x service door (approx. 1,800 x 850 mm) - 1 x cable protection tube - 1 x filling line DN 100 ending in TW connection - 1 x welded adapter for empty detector Bottom: The silos end at the bottom in a 90° cone with flange DN 200 and emergency shut-off slide, as well as a mounted suction box.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Hot water tank / thermal storage tank made of V4A stainless steel, vertical design Technical data / dimensions Available quantity: 1 Volume: approx. 164,000 liters Tank type: storage tank Condition: used Food grade: yes Design: vertical Internal diameter: approx. 3,900 mm External diameter: approx. 4,200 mm Cylindrical height: approx. 13,000 mm Total height: approx. 17,220 mm Weight: approx. 10,500 kg Specific weight of medium: 1.0 t/m³ Operating pressure: non-pressurized Wall thickness (shell/cylinder): approx. 5.3 - 7 mm Floor clearance: approx. 1,800 mm Operating temperature: -10°C / +90°C Material / properties Internal shell material: V4A (1.4571) Outer shell material: stainless steel Internal surface: 2B finish Internal weld seams ground smooth Insulation Insulation present Insulation thickness: approx. 100 mm Insulation material: mineral wool Insulation jacket material: aluminum Insulation jacket: bolted/riveted Remarks: Cone roof cladding: stainless steel Cylinder cladding: aluminum trapezoidal sheet Cone cladding: smooth aluminum sheet Equipment Base type: support ring/stand collar Fixation: fixed Top section: conical base Bottom section: conical base Top: 1 x manway DN 200 with insulation cover 1 x flange DN 32 welded into manway (CIP) 1 x manway drainage DN 32 1 x empty cable conduit DN 50 1 x overflow DN 150 2 x lifting eyes Shell: 1 x inlet nozzle DN 100 1 x filling line DN 100 4 x thermometer sleeves (ø 26 mm) with insulation box 1 x CIP line DN 32 1 x nameplate 1 x access door (approx. 2,000 x 1,000 mm) 1 x outlet nozzle DN 100 Bottom: 1 x pivoting cone DN 450, ending in smooth flange DN 100 Remarks: For remaining details, refer to images and drawings. Fjdpfx Ahoqagl Homjgc Documentation Drawing

Stanje: rabljeno, Manufacturer: Alfa Laval Model: MRPX214 TGV-74 Function: Whey Separator / Cream Separator Capacity: 10,000–12,500 liters/hour Motor Power: 15 kW Electrical System: 380 V / 50 Hz / 3 phase Bowl Speed: 1450 rpm Tools Baseplate new Control panel new Water system (valves, pressure vessel, fittings, etc.) Serviced Spare parts: Dairy Machinery UK Fedpeyc Rtfjfx Ahmogc

Stanje: dober (rabljeno), 3 x 65 m³ aluminum silo (granulate storage silos) with long support skirting (used) Fedpfevmidyjx Ahmjgc Capacity approx. 65,000 liters Internal diameter approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone angle: 90 degrees Connections on top cover: 1 vent nozzle with hood DN 200 1 flange connection DN 100 On the shell: 1 hinged manhole DN 450 1 filling pipe downward, DN 80 Cone: The cone terminates with a flange DN 150 with extraction box Otherwise as per drawing and photos

Stanje: zelo dobro (rabljeno), Control: Heidenhain TNC 310 equipped with indexing head Travel paths X/Y/Z: 500/250/160 mm W axis travel: 480 mm Clamping surface (L x W): 885 x 320 mm Permissible table load: 250 kg Distance table – spindle nose: 0 – 605 mm Feed rate X/Y: 1 – 2000 mm/min Feed rate Z: 1 – 1200 mm/min Tool – quick-change system: SF 32 Stepless speed range: 9,200 rpm Drive power: 5 kW Fgjdowkrn Ijpfx Ahmec Space requirements (W x D x H): 1850 x 2550 x 2400 mm

Stanje: novo, Leto izdelave: 2025, Učinkovite hladilne naprave z R290 – zračno hlajene, zanesljive, okolju prijazne. Naši modeli pokrivajo razpon moči od 20 do 800 kW ter nudijo prilagodljive možnosti z ali brez prostega hlajenja. Prednosti: Fgedpfsfqllwjx Ahmsc Ekološko hladilno sredstvo R290 z nizkim toplogrednim potencialom Zračno hlajene, z vgrajeno črpalko in rezervoarjem Možnosti: s prostim hlajenjem uporaba zunanjega zraka za dodatno hlajenje, zmanjša porabo električne energije, še posebej v hladnejših mesecih Možnost prilagoditve od 20 do 800 kW glede na vaše potrebe Najsodobnejši nadzor Prilagojeno svetovanje, načrtovanje in dimenzioniranje Dobavni rok glede na izvedbo in opremo Trajnostno upravljanje delovanja z nizkimi emisijami CO2 in nizkimi obratovalnimi stroški Z veseljem vam svetujemo, katera izvedba je optimalna za vaše potrebe.

Stanje: novo, Leto izdelave: 2026, The ATC plotter series has been designed for professional applications in large industrial plants and factories, used for the production of complex, large-format components. Owing to its special construction, the machine is suited for manufacturing foundry models and yachts, significantly reducing processing times. To meet the demands of heavy-duty machining, ATC machines are equipped with a reinforced frame and more powerful AC servo drives on each axis. The presence of five axes supports the machining of even the most demanding components. Fodeiq U Tqspfx Ahmjgc Standard equipment for this series includes automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials processed: - wood - wood-based materials (chipboard, MDF, OSB, etc.) - plastics - composites - PVC - non-ferrous metals (aluminium, brass, copper, etc.) CONSTRUCTION: The machine’s frame is made of steel and cast iron, ensuring high rigidity and resistance to heavy loads associated with machining processes. WORKING AREA: The working area of our machine is 3000 x 6000 [mm]. Z AXIS RANGE AND GANTRY CLEARANCE: Parameters tailored to the client’s individual requirements. DRIVES: The machines are powered by SERVO motors, providing appropriate acceleration and speed in all directions. The X and Y axes feature classic, proven helical racks for durability and precision, while the Z axis is driven by a high-grade ball screw. All axes move along linear guide rails. SPINDLE: A powerful, brushless high-end spindle drives the cutting tool. The spindle speed ranges from 6,000 to 24,000 rpm. It is powered by a frequency inverter of higher power than the spindle itself, which prevents speed drops under heavy load. TOOL MAGAZINE: As standard, the machine is fitted with a linear tool magazine with 6 HSK holders. Additional tool magazine positions are available on request. SOFTWARE: The machine comes with dedicated CAD/CAM software, enabling fast and easy design of components, which the software then converts into G-code. Importing ready-made files from other programs is also possible. CONTROL SYSTEM: The machine is operated via a controller equipped with its own processor and RAM, ensuring stable and reliable operation.