Hidravlične stiskalnice

EDELHOFF HZP 200

Stanje: novo, - Shaft diameter 50 mm - The upper roller is hydraulically operated - Three driven rolls - Digital display - Can be used horizontally / vertically Ncsdjgg N Twjpfx Altsw - Foot switch - Emergency stop - Documentation - 400V

Stanje: pripravljen za uporabo (rabljen), Further information to follow. Accessories: Ncedpjqzx Dqofx Altew Separator frame (stainless steel) 1200 x 1000, separator drum, motor, tool kit, documentation

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) *OPTIONS: Nsdpfxeg Ezars Altjcw - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: novo, Leto izdelave: 2026, 2-roll driven profile bending machine Hydraulically adjustable top roll Ncedpfshgiuhjx Altew Shaft diameter: 40 mm Roll diameter: 152–162 mm Rotational speed: 8.5 rpm Top roll adjustment: 120 mm Capacity chart: see attachment Machine available in various configurations: Manual adjustment, 3-roll drive, etc.

Leto izdelave: 1980, stanje: dober (rabljeno), A very well-preserved, cycle-controlled lathe from Weisser Heilbronn equipped with SIEMENS control system. Centre distance: 2000 mm Njdogyy I Aopfx Altocw Centre height: 295 mm Swing diameter over bed: 600 mm Swing diameter over cross slide: 260 mm Swing diameter in the gap: 800 mm Total length of gap: 375 mm Bed width: 450 mm Travel X-axis: 350 mm Travel Z-axis: 1850 mm Spindle nose according to DIN 55022: Size 8 Number of spindle speeds: 18, range 14 – 1400 rpm Spindle bore: 71.5 mm Front bearing diameter: 110 mm Feed range: 0.01 – 40.95 mm/rev Rapid traverse: 8 m/min DC drive: 15 kW, 400V, 50Hz Max. allowable torque at the spindle: 2500 Nm Tailstock quill diameter: 80 mm Quill stroke: 250 mm Quill taper: MK 5 Length x width x height Machine weight: 5500 kg Accessories: — Tailstock — Pneumatic 3-jaw chuck with exchangeable jaws, 315 mm — "MULTIFIX" quick-change tool post in front of the centre, size "C" — 4-position turret behind the centre — Tool holder — Coolant system — Follow rest, pneumatically operated Technical data and dimensions subject to change and errors. Video conference via WhatsApp possible by appointment.

Stanje: rabljeno, Leto izdelave: 1994, Cutting diameter: 520 mm Bandsaw blade length: 7239 mm Cutting width: 1.3 mm Controller: POSIMOD Cutting area (square): 520 x 520 mm Feed length: 500 mm Multiple feed length: 4500 mm Minimum cut-off length: 6 mm Ncedpfxowm Rm Is Altow Remnant piece length min./max.: 10 / 100 mm Cutting speed: 20 - 130 m/min Bandsaw blade dimensions: 7239 x 50 x 1.3 mm Saw motor: 5.5 kW Total power requirement: 10.0 kW Machine weight: approx. 3.8 t Machine dimensions (L x W x H): 3.42 x 2.30 x 2.40 m - 2-column guided - Accessories: 2500 mm infeed roller conveyor, chip conveyor, coolant system

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, obratovalne ure: 3 h, številka stroja/vozila: 12, nosilnost: 250 kg, tip droga: dupleks, dvižna višina: 22.000 mm, Oprema: ABS, 🚀 GSR B220PXE – AVTODVIGALO S KOŠARO Stanje: NOVO (2026) 🚚 VOZILA V PONUDBI Iveco Daily MY24 35S14H Mercedes-Benz Sprinter MY24 315CDI 37/35 ⚙️ TEHNIČNE SPECIFIKACIJE Delovna višina: 21,75 m Bočni doseg (120 kg): 11,25 m Bočni doseg (250 kg): 8,45 m Nosilnost košare: 250 kg Delovno območje: 450° Rotacija košare: 90° + 90° 💡 DODATNE INFORMACIJE ✅ Možnost nakupa preko leasinga ali kredita ✅ Cena in dodatne konfiguracije na povpraševanje ✅ Možnost vgradnje klimatske naprave ✅ Registracija in homologacija vključeni v ceno za Hrvaško! ✅ Servis in rezervni deli zagotovljeni 💪 ZAKAJ IZBRATI GSR AVTODVIGALA S KOŠARO? 🔹 Več kot 50 let izkušenj v proizvodnji. 🔹 Vsaka enota je natančno sestavljena in večkrat preizkušena pred dobavo. 🔹 Uporabljeni samo najkakovostnejši materiali – švedski STRENX in nemški THYSSEN-KRUPP jekli. 🔹 GSR dvigala so sinonim za zanesljivost, varnost in dolgo življenjsko dobo. 🔹 Vse komponente prihajajo izključno z evropskega trga – od proizvajalcev z najvišjo stopnjo nadzora kakovosti. ⚡ ELEKTRIČNI SISTEM Zanesljivo in varno delovanje zahvaljujoč vrhunskim komponentam: BOSCH • SCHNEIDER • GEWISS • PENNY+GILES • TELEMECANIQUE • OMRON 💧 HIDRAVLIČNI SISTEM Stabilno in natančno delovanje pri visokih pritiskih – preverjena kakovost: BOSCH • BREVINI • ATLANTIC-FLUID TECH • WALVOIL • REXROTH • PIRELLI 💰 CENA: NA POVPRAŠEVANJE 📞 Kontaktirajte nas za individualno ponudbo in razpoložljive konfiguracije. Več kot 30 let izkušenj v: 🔹 Servisu 🔹 Najemu 🔹 Prodaji avtodvigal s košaro 🌍 GENERALNI ZASTOPNIK ZA: Njdpfxoxvx Rqe Altecw Hrvaško, Slovenijo, Črno goro, Bosno in Hercegovino ter Srbijo

Stanje: rabljeno, Leto izdelave: 2019, moč: 30 kW (40,79 KM), volumenski pretok: 4,95 m³/h, tlak (maks.): 12,75 letvica, Zračni kompresor Atlas Copco AQ30VSD FF Proizvajalec: Atlas Copco Tip: AQ30VSD FF Ncedoxk U Arspfx Altow Leto izdelave: 2019 Kraj izdelave: Belgija Maksimalni tlak: 12,75 bar Moč: 30 kW Zmogljivost: 4,95 m³/min Prostorninski pretok: 82,5 l/s, 174,8 cfm, 4,95 m³/min Moč motorja: 40 KM Hitrost motorja: 8600 vrt/min Teža: 702 kg Napajanje: 400 V, 50 Hz, 3 faze Izvedba: Brez olja ISO razred: 8573-1 Class 0 Krmiljenje: Elektronikon Graphic Oprema: SMARTLINK Izvor: Izdelano v Belgiji Za pravilnost, popolnost in ažurnost podatkov ne jamčimo.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Pressure: 170 t Bending length: 3,170 mm Frame gap: 2,700 mm Throat depth: 420 mm Installation height: 470 mm Stroke: 200 mm Approach speed: 100 mm/sec Working speed: 10.0 mm/sec Return speed: 100 mm/sec Table width: 180 mm Table height: 960 mm Oil capacity: 235 L Pressure: 300 bar Controlled axes: 6 units Operating hours: 29,400 h Total power requirement: 16.5 kW Machine weight approx.: 11,910 kg Dimensions L-W-H: 4,025 x 2,020 x 2,900 mm Very well maintained condition (!!) Only approx. 29,400 operating hours - Inspected condition - Machine video available - ?v=APP0HZjMms4 Equipment: - Electro-hydraulic CNC press brake - AMADA CNC control "OPERATEUR 2" - 6 axes (X, Y1+Y2, R, Z1+Z2) * Swiveling control panel – front left * Tool & program library - CNC-controlled back gauge adjustment (X-axis) * Adjustment range up to 700 mm - CNC-controlled vertical adjustment of back gauge fingers (R axis) * Adjustment range up to 250 mm - CNC-controlled lateral adjustment of back gauge fingers (Z1+Z2) Nodpfx Asxabgpeltscw - Hand-held controller for manual axis movement - AMADA manual upper tool clamping system - AMADA goose-neck upper tools – segmented - AMADA lower tool holder – incl. 1x V-die (not complete) - AMADA DIGI PRO – digital angle measuring system - 1x mobile double foot switch - Side safety guards (swiveling doors) - Rear safety guard (swiveling door) - Emergency stop button at the front - Operating manual (ENG)

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), SMG HZPU 8000-3000/2100-S1 Hidravlična vlečna stiskalnica Znamka: SMG Tip: HZPU 8000-3000/2100-S1 Leto: 1995 Nedpsn Awd Rjfx Altocw Opis: Hidravlična vlečna stiskalnica s H-okvirjem Tlačna sila: 800 ton Vpenjalna površina: Pribl. 3.000 x 2.100 mm Vgradna višina: Maks. 1.400 mm