ECKOLD - KF 460 preoblikovalni stroj

Eckold KF 460

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Eckold Kraftformer; motoriziran stroj za krčenje, raztezanje, kupoliranje, glajenje, preoblikovanje, sploščenje, ravnanje Stroj je opremljen z orodji: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Število hodov: 300 / 600/min. Največja debelina pločevine: 4,0 mm Horizontalni izkoristek: 460 mm Vertikalni izkoristek: 475 mm Največja debelina nerjavečega jekla: 2,0 mm Največja debelina aluminija: 3,0 mm Pgodpfxow Rcf No Agpsw Motorizirano nastavljanje bata: 0 - 60 Ročna / Motorizirana nastavitev bata Moč: 3,0 kW Dolžina: 1700 mm Širina: 950 mm Višina: 1700 mm Teža: 1250 kg

Stanje: novo, Roll bending machine with spindle adjustment. Features: Shaft diameter: 40 mm Working position: horizontal/vertical Dimensions (W x H x D): 700 x 1460 x 600 mm Weight: 180 kg Performance: Round tube: 70 x 1.5 mm Square tube: 50 x 50 x 3 mm Round bar: 35 mm Pgodpouudhfsfx Agpjw Flat bar: 50 x 10 mm Angle iron: 50 x 50 x 6 mm Scope of delivery: CE40M2A Universal roller set for profiles (2 knurled, 1 smooth) Accessories (incl. control panel with foot switch, operating manual)

Stanje: dober (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, Eckold Kraftformer KF460. Base unit manufactured circa 1972 / fully overhauled in 1991. The KATT drive motor was recently fitted with new bearings. Two tools are included in the price. A video can be provided. Sale without warranty or return, ex works. The machine can be inspected during our business hours. Pedpfxovfcp Hs Agpogw

Stanje: zelo dobro (rabljeno), Leto izdelave: 1957, Eckold Kraftformer Fokker Eckold - KF 400 ID STROJA 9141 Proizvajalec: Fokker Eckold Tip: KF 400 Leto izdelave: 1957 Hitrost: 150 gibov Ročna nastavitev bata: 0–60 mm Velik komplet orodij (približno 12 kos) Podpfx Agjw Rcc Uepsgw Komplet orodij za kolesa (angleško kolo) Vertikalni izliv: 250 mm Horizontalni izliv: 400 mm Dolžina: 1500 mm Širina: 600 mm Višina: 1800 mm Teža: 1800 kg Eckold Kraftformer; motoriziran stroj za stiskanje, raztezanje, oblikovanje kupole, glajenje, preoblikovanje, sploščenje, ravnanje Stroj opremljen za orodja: 1, 1,5, 2, 4 mm FWR FWA LFA LFA

Stanje: dober (rabljeno), Leto izdelave: 1996, Pipe diameter: 6 – 28 mm Wall thickness: 2 mm Minimum bending radius: 2 x D Control system: IPU 20 Maximum bending radius: 5.0 x D mm Maximum bending angle: 190° Mandrel length: 3000 mm Pgjdpfxsvtgn No Agpow Operating pressure: 180 bar Hydraulic motor: 4 kW Machine weight: approx. 900 kg Space required: approx. 3.8 x 1.1 x 1.3 m Semi-automatic electro-hydraulic mandrel tube bending machine with PLC control for 20 bending angles and display in the control panel for presetting the bending angle, angle detection and measurement via absolute rotary encoder, automatic tool plate return, rotation device with digital readout, hydraulic quick-action chuck, automatic mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: Hydraulic on/off, mode selection, clamp open/close, advance/retract clamping, mandrel in/out, bend in/out, lock/unlock, mandrel lubrication, rotation device in/out, tool plate return, length stop forward, emergency stop. The machine comes from prototype production and was only used occasionally until 2000. Subsequently, the machines from this department were sold. The buyer never used the tube bending machine, so it has only been in storage since then and has not been operated (original paint). Machine at a special low price! This is a used machine, therefore sold under exclusion of any warranty. STOCK-HOLDING DEALER WITH 1600 m² SHOWROOM.

Stanje: novo, Condition: New Delivery time: approx. 4 weeks from order Pgjdpfx Aowiqxisgpsw Country of origin: Italy Price: €3,620 Max. diameter (steel tube): 38 mm Length: 245 mm Width: 300 mm Height: 320 mm Weight: 23 kg Max. bending moment (modulus): 19 cm³ Standard steel tube: 38 x 1.5 mm Furniture tube: 38 x 1.5 mm St35 (for hydraulic lines): 35 x 3 mm Stainless steel AISI304-318: 30 x 2 mm Stainless steel AISI308 (food-grade): 35 x 1.5 mm Soft brass: 42 x 1.5 mm Hard copper and aluminium: 42 x 1.5 mm Soft copper: 50 x 2 mm Conduit pipe (TAZ): 50 x 2 mm Mepla, Gebereit and similar: 50 x 4 mm Round steel (S275JO): 20 mm Flat bar (S275JO): 10 x 25 mm Flat iron (S275JO): 25 x 20 (upright), 25 x 1 mm Max. bending radius: 180 mm Min. bending radius: 36 mm Min. pipe Ø: 10 mm Max. bending speed: 2.8 rpm Motor: 0.9 kW Bending angle adjustment: 0–180° Single-phase motor 230V / 900W Electric motor brake Indicator light for overload warning Forged steel base – suitable for mounting on a tripod (tripod not included) 90° bend in 6 seconds Foot pedal No tools included OPTION: Tripod stand €320,-

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: ABCM 1250/3, vrsta vhodnega toka: trifazni, Gas profile cutting machine for I-beams. Pgsdpfjrbif Tjx Agpew Manufacturer: Peddinghaus, Germany; Model: ABCM 1250/3; Control: Fagor; The machine is connected and in working condition.

Stanje: rabljeno, Leto izdelave: 1999, Premer cevi: 12-54 mm (baker / inox) mm Serijska številka: EBD Način delovanja: Rezanje/ Odstranjevanje igel / Pon Psdpfx Agsumyhlopsgw Hitrost valjev: 450 obr/min m/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Eckold Kraftformer KF 665 ECKOLD - KF 665 Pgodpfsxcm Epex Agpow Eckold Kraftformer; motoriziran stroj za krčenje, raztezanje, ukrivljanje, glajenje, preoblikovanje, sploščevanje in ravnanje. Stroj z opremo za orodja: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Število hodov: 150 / 300 / 600 min. Največja debelina pločevine: 6,0 mm Horizontalni izhod: 675 mm Vertikalni izhod: 450 mm Največja debelina nerjavečega jekla: 4,0 mm Največja debelina aluminija: 8,0 mm Motorizirana nastavitev bata: 0 - 80 Moč: 4,1 kW Dolžina: 1950 mm Širina: 860 mm Višina: 2050 mm Teža: 2000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1984, Eckold Kraftformer; motorizirana naprava za krčenje, raztezanje, oblikovanje kupol, glajenje, preoblikovanje, sploščenje in ravnanje Stroj z orodji: FWR1307 FWA 1306 FWA 802T FWA 1002T LFA 120S LFA155T Število gibov: 150 / 300 / 600 na minuto Maks. debelina pločevine: 6,0 mm Horizontalni doseg: 675 mm Vertikalni doseg: 450 mm Podoxvxwwspfx Agpegw Maks. debelina (nerjaveče jeklo): 4,0 mm Maks. debelina (aluminij): 8,0 mm Motorizirana nastavitev bata: 0 - 80 Moč: 4,1 kW Dolžina: 1950 mm Širina: 860 mm Višina: 2050 mm Teža: 2000 kg Prosimo, upoštevajte: Podatki na tej strani so bili po najboljšem vedenju pridobljeni od nas in, kjer je bilo mogoče, od proizvajalca. Podatki so bili podani v dobri veri, vendar za njihovo točnost ne jamčimo. Ti podatki ne predstavljajo pogodbenih pogojev ali jamstva. Priporočamo, da preverite vse ključne informacije.