Robna lepilka EBM KDP 112 SLK/A

EBM KDP 112 SLK/A

Stanje: rabljeno, Leto izdelave: 2018, Used machine Year of manufacture: 2018 Special feature: Machine suitable for edging heights up to 100 mm! Condition: Factory-inspected by Lange Maschinenbau Equipment and technical data: - Machine table with 13 roller tracks for improved workpiece guidance - Edge feed, synchronized with the belt feed - Edge thickness adjustable via digital counter - Pneumatic roller separation with blade (for cuttable edges) - Three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm length - approx. 6.0 m/min - 50 mm wide toothed belt with thick, workpiece-friendly rubber surface - Digital counter for height adjustment - Direct glue application to the workpiece: Leak-proof glue pot with bottom glue supply and quick heat-up time after machine downtime Itjdpfxowka S Is Al Nsf - End trimming unit: - For front and rear edges of the workpiece - Automatic sensing on the workpiece - Pneumatic end trimming with blade for cuttable edges - Flush trimming unit: - With vertical sensing and horizontal guide - Reproducible adjustment using digital counters - Two powerful 0.4 kW high-frequency motors - Continuously adjustable from 4,000 to 18,000 rpm - Cutter diameter 70 mm, Z4, radius 2 mm/15° - Central extraction port Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper trimmer with the belt feed - Continuous workpiece support approx. 1,800 mm long - Extendable workpiece support rail, approx. 300 mm extendable - Rotating film reel Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roller separation: max. 1.0 x 55 mm, 2 x 45 mm - Glue pot heating power: 2.7 kW - Heat-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400V, 50 Hz, 3Ph + N - Total connected power: 3.8 kW - Pneumatic connection: 6 bar Dimensions (without film reel): approx. 1,800 x 700 x 1,300 mm Weight: approx. 260 kg Availability: short-term Location: Flörsheim

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Table saw from 2014. This Altendorf F45 features a sliding table length of 3000 mm and a cutting width of 1300 mm. It is equipped with a powerful 5.5 kW main motor and supports a maximum saw blade diameter of 550 mm. The machine comes with a swivelling, eye-level control panel and a rip fence for precision cuts. If you are looking for high-quality sawing performance, consider the Altendorf F45 table saw we are offering for sale. Contact us for further details. Itjdpfeywk H Asx Al Nof • Sliding table length: 3000 mm • Cutting width: 1300 mm • Maximum saw blade diameter: max. 550 mm • Main motor power: 5.5 kW (7.5 HP) • Main motor manufacturer: ATB • Operating voltage: 400 V • Frequency: 50 Hz • Current: 11.5 A • Phases: 3 • Control panel: swivelling, mounted at eye level • Scoring unit preparation: yes • Rip fence: included • Rip fence type: Manual adjustment on hardened, chrome-plated round bar • Rip fence display: DIGIT X (electronic digital thickness display) Additional equipment • AKE clamping system • Table extension: 840 mm • Mitre fence • DUPLEX fence (cutting length up to 1350 mm)

Stanje: rabljeno, Leto izdelave: 1989, Rabljeni stroj Leto izdelave: 1989 Ijdpfx Alow I U E Ao Njtf Stanje: Preverjeno delovanje Oprema in tehnični podatki: Maks. debelina robnega traku mm: 20 Maks. višina robnega traku mm: 51 Maks. debelina materiala v roli mm: 3 Minimalna dolžina obdelovanca mm: 140 Minimalna širina obdelovanca mm: 60 Lepljenje: 1906 patrona Pritiskalna enota Rezkalna enota 1920 za rezkanje poravnano do 20 mm in posnetje robov Potrebna površina D x Š x V mm: 3150x1800x1375 Teža pribl. kg: 800 Lokacija: Flörsheim Razpoložljivost: Kratkoročno

Stanje: rabljeno, številka stroja/vozila: 006279, Delovno območje os X: 3100 mm Delovno območje os Y: 1250 mm Itedpfx Alokw H Ekj Nef Delovna površina: gnezdilna miza Število krmiljenih osi: 3 osi Število vrtalnih vreten: 11 Število mest za orodja: 8

Stanje: rabljeno, Leto izdelave: 2022, Used machine Year of manufacture: 2022 Iodpfjx Hbrujx Al Netf Features and technical specifications: - Professional panel saw in heavy-duty construction - With scoring unit; externally adjustable with separate drive motor - Sliding table made of anodized aluminum with proven and permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - With integrated on/off switch on the sliding table - With motorized height and tilt adjustment of the saw unit, digital display for tilt - Programmed control of saw blade height, tilt, and rip fence position - Swiveling control panel at eye level - Quality Made in Italy - Maximum cutting length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut capacity to the left of the saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45 ° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction port: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 1993, Rabljeni stroj Leto izdelave: 1993 Oprema in tehnični podatki: - Dolžina vpenjanja vretena: 180 mm - Nagib vretena: -10° do +45° - Motoriziran dvig vretena z natančnim nastavljanjem - Motoriziran nagib vretena - Motor: 5,5 kW - Velikost mize: 1200 x 730 mm - Največja odprtina mize: 420 mm - Motorna zavora - Hitrosti: 3000/4500/6000/7000/10000 obr/min Isdexwz Rcspfx Al Nstf - Prikaz hitrosti - Priključek za odsesavanje: 125 mm - Z integralnim Aignerjevimi prislonom - S 3-valjnim podajalnikom Razpoložljivost: takoj Lokacija: Röllbach

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, moč: 11 kW (14,96 KM), širina obdelovanca (maks.): 70 mm, skupna masa: 800 kg, delovna višina: 870 mm, Technical data: Maximum edge thickness: 5 mm / 8 mm Maximum workpiece height: approx. 40 mm / 50 mm Minimum workpiece height: approx. 250 mm / 300 mm Minimum workpiece width: approx. 70 mm Feed rate: approx. 11 m/min Ready for operation: approx. 4.5 min Power consumption: approx. 11 kW Electrical connection: 230/400V / 50/60 Hz Working table height: 870 mm Dimensions (LxWxH): 4100 x 1400 x 1300 mm Iedpfjug Uqajx Al Notf Condition and further details as per images.

Stanje: rabljeno, težka precizna formatna krožna žaga SCM SI 550 E Class Različica: tesarstvo - mizarstvo Dolžina reza: 3200 mm Širina reza: cca 1500 mm Glavni motor: 11 kW 3 hitrosti: 2500/3000/4200 o/min Kotni prislon z dolžinsko kompenzacijo Itsdpfx Aoyi Duiol Nsf Žagin list do Ø 550 mm Električno dvigovanje in nagibanje žaginega lista z digitalnimi prikazi Stroj iz upokojitve / prva dostava 2011 Stroj delavniško pregledan, v VRHUNSKEM STANJU Na zalogi v Liebochu

Stanje: zelo dobro (rabljeno), Steton PF530 E. Electric planing height adjustment - Working width: 53 cm Itjdsipx Uqopfx Al Nsf - Tersa cutter block - Table length: 275 cm - Motor power: 4 kW / 380 V - Fence adjustable at an angle - Electric brake The machine is in very good condition and runs smoothly.

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 0-260-06-0228, Foot control 1200 x 800 mm Ijdpfoigadljx Al Nstf Extraction nozzle 80 mm Pneumatic connection Cable + 16 A plug 1 set of operating tools 1 set of measuring rollers