Visokohitrostni radialni vrtalni stroj

DONAU Donaumeric 440

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Ledpfsxn A Spex Ahujrn Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Please read the technical specifications in full. If the machine is of investment interest to you, we kindly request your complete identification, including a correct telephone number and email address, in order to receive an offer. DECKEL Milling Machine / Tool Milling Machine DMU 35 M 3 x 2 Axes CNC Milling Machine Equipped with SIEMENS 810 D – ShopMill Software Year of manufacture: 2001 and 2003 (2 units available) Travel paths X/Y/Z: 350 x 240 x 340 mm Lrodpfoxz Rdaex Ahusn Infinitely variable spindle speed: 20 – 6,300 rpm Spindle taper: SK 40 DIN 69871 Drawbar: DIN 69872 Drive power: 6.3 / 10 kW (100/40% duty cycle) Torque: max. 55/80 Nm Universal tilting-/rotary table: 400 x 290 mm Table load: 100 kg Distance spindle nose/table: min./max. 145/485 mm Feed rate: 3,000 mm/min Rapid traverse: 5,000 mm/min Input increment: 0.01 mm Rotation range: 360 degrees Swivel range: degrees Total power requirement: kVA Weight: approx. 1750 kg Technical data non-binding! Accessories/Equipment: - Direct position measuring system for 3 axes - Spindle drive via servomotor with toothed belt - 2 gearbox ranges - Full safety enclosure with sliding door - Swivelling control panel - Coolant nozzles on vertical head - Coolant system - Chip tray with coolant tank - Electronic handwheel - Machine feet - Machine lamp - Serial interface RS232C, LAN (RJ45) The machine is ideal for prototyping, toolmaking, training, mechanical workshops; gunsmiths, etc. It impresses with its versatility, thanks to the additionally manually operable rotary/tilting table which allows 5-sided machining. Condition: good to very good, from a vocational training center, see pictures. Can be tested under power.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, laserska moč: 12.000 W, najv. debelina jeklene pločevine: 30 mm, maks. debelina aluminijaste pločevine: 30 mm, maks. debelina medeninaste pločevine: 20 mm, najv. debelina bakrene pločevine: 15 mm, moč: 12 kW (16,32 KM), trajanje garancije: 24 meseci, Oprema: varnostna svetlobna zapora, DURMA Fiber Laser Cutting System HD-FN 3015: The ideal price-performance solution. The DURMA Fiber Laser Cutting System HD-FN 3015 is the best choice for companies seeking maximum performance and efficiency at an unbeatable price. This state-of-the-art machine combines innovative technology with user-friendly operation, thereby offering outstanding advantages for metal processing. Technical Data Laser power: 12 kW With automatic shuttle table Maximum sheet thickness: Mild steel: 30 mm Stainless steel: 25 mm Aluminium: 30 mm Copper: 15 mm Cutting area: 3060 x 1525 mm Travel axes: X-axis: 3060 mm Y-axis: 1525 mm Z-axis: 125 mm (max. 275 mm) Sheet panels Maximum sheet panel size: 3048 x 1524 mm Maximum sheet panel weight: 240 kg/m² Speed and Precision: Maximum speed X-axis: 100 m/min Maximum speed Y-axis: 100 m/min Maximum simultaneous speed: 141 m/min Maximum acceleration: 14 m/s² Positioning accuracy: ± 0.05 mm Repeatability: ± 0.05 mm Key Features of the System: ・Shuttle table: Longitudinally positioned for optimal accessibility of loading and unloading systems. ・Enclosed cutting area: Equipped with protective glass for maximum safety. ・CNC graphic control: With a user-friendly touchscreen for easy operation. ・Laser source: Brilase 12 kW. ・Cutting head: Automatic adjustment of the focus for precise cutting operations. ・Integrated cooling system: Ensures efficient cooling of the cutting head and laser source. ・CAD/CAM software: Enables programming including autonesting for optimal material utilization. ・Positioning laser: Assists in the precise positioning of workpieces. ・Sheet check system: Automatic detection of sheet position and dimensions for improved process security. ・Automatic nozzle cleaning: Ensures continuous cutting quality. ・Central lubrication: For smooth machine maintenance. ・Waste box: For a clean working environment. ・Work area lighting: Ensures good visibility during operation. ・Multi-chamber extraction system: Effective removal of smoke and particles. ・Light curtain protection: Ensures safety at the shuttle table. Ljdpfx Ahou E Tczouorn ・Remote maintenance access: Facilitates diagnosis and maintenance remotely.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.400 mm, hitrost pomika os X: 30.000 m/min, hitrost podajanja osi Y: 30.000 m/min, hitrost podajanja os Z: 30.000 m/min, največja hitrost vretena: 2.000 obr/min, dolžina mize: 4.000 mm, širina mize: 2.000 mm, CNC Bed-Type Milling Machine SACHMANN RAMBAUDI - MP-212 HS KOSMO 3 Universal Milling Head SK-50, 0.02°, 1195 Nm Spindle Extension L = 600 mm with 2000 rpm 3D Probe MP60 ATC Chain with 80 positions Coolant System 1320 l, 4.8 bar Rotary Table 2000 x 1600 x 15 t V-Axis (Feed) 1500 mm Rotational Speed 3 rpm Heidenhain RON 700 Rotary Encoder for Table Rotation Ram Size 500 x 500 mm with 56 kW Chip Conveyor X-Axis: 6000 mm Y-Axis: 2000 mm Z-Axis: 1400 mm Table Length: 4000 mm Table Width: 2000 mm Table Load Capacity: 25,000 kg Spindle Motor Power: 37 kW Spindle Speed: 2000 rpm Tool Holder: 50 ISO/BT/MK Feed Rate X-Axis: 30,000 mm/min Feed Rate Y-Axis: 30,000 mm/min Feed Rate Z-Axis: 30,000 mm/min Automatic Milling Head Index: 2.5 x 2.5° Ledpfx Ajx Nh H Dohuern Length: 15,000 mm Width: 8,000 mm Height: 6,000 mm Weight: 85,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. They therefore do not constitute representations or contractual terms. We recommend verifying all critical details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, potovalna razdalja osi X: 3.048 mm, pomik osi Y: 1.016 mm, pomik po osi Z: 762 mm, proizvajalec krmilnikov: HAAS, skupna višina: 3.590 mm, obremenitev mize: 1.814 kg, skupna masa: 16.914 kg, največja hitrost vretena: 7.500 obr/min, moč vretenovega motorja: 22.400 W, teža orodja: 13.600 g, največja dolžina izdelka: 7.320 mm, število osi: 3, Ta 3-osni stroj HAAS VF 11/50 je bil izdelan leta 2011. Opremljen je z robustnim CNC krmiljenjem, veliko delovno površino mize 3048 × 711 mm in omogoča maksimalno obremenitev 1814 kg. S pomiki po oseh X, Y in Z (3048 mm, 1016 mm in 762 mm) omogoča obsežno delovno območje. Vreteno dosega do 7500 obratov na minuto, stroj ima izmenjevalnik orodij 30+1. Izkoristite priložnost za nakup vertikalnega obdelovalnega centra HAAS VF 11/50. Za dodatne informacije nas kontaktirajte. • Delovna površina mize: 3048 × 711 mm Lsdpfx Ahex D Imqjujrn • Višina mize od tal: 850 mm • Hitrost podajanja: 9,1 m/min - 15,2 m/min • Tip menjalca orodij: Naključno 30+1 • Položaji v zalogovniku: 254 mm • Največji premer orodja pri sosednjih/alternativnih orodjih: 102 mm – 254 mm • Največja dolžina orodja: 406 mm

Stanje: novo, Leto izdelave: 2025, Moč laserja: 12.000 W Delovno območje laserskega obratovanja: 3048 x 1524 x 280 mm hkratna hitrost: 150 m/min Največja pozicijska natančnost osi X,Y: 0,05 mm Maks. debelina konstrukcijskega jekla: 30 mm Maks. debelina nerjavečega jekla: 25 mm Maks. debelina aluminija: 25 mm Maks. debelina medenine: 20 mm Maks. debelina bakra: 10 mm Največja teža obdelovanca: 1500 kg Dolžina: 9500 mm Širina: 4200 mm Ljdpfx Ajv U A I Ishusrn Višina: 2600 mm Teža stroja: 5300 kg Skupna priključna moč: 60 kW Standardna oprema Komponente: Visokonatančna linearna vodila: WON (Koreja) ali Rellong (Tajvan) Visokonatančna zobata letev: Strronse (Nemčija) Visokonatančni reduktor: Techmech (Nemčija) Servo motor in driver: Inovance (Kitajska) Električno krmiljeni proporcionalni ventili:

Stanje: novo, Leto izdelave: 2026, Large and stable radial drilling machine with a wide speed range, ensuring precise and fast machining. Machine Features - Heavy weight and rigid construction provide excellent stability and vibration-free operation - Box-type worktable allows easy adjustment and mounting of the workpiece - Motorized arm height adjustment - Control panel located at the front of the machine for increased efficiency and ergonomic operation - Ground column surface ensures smooth, easy, and precise arm movement Lrodpji D Da Aofx Ahusn - Drill equipped with manual head and arm column lock - Large speed range guarantees accurate and rapid drilling processes Technical Data MAX. DRILLING DIAMETER – 35 mm (cast iron); 30 mm (steel) DISTANCE FROM SPINDLE AXIS TO COLUMN – 360 - 1300 mm DISTANCE FROM SPINDLE AXIS TO TABLE SURFACE – 260 - 1300 mm SPINDLE STROKE – 200 mm SPINDLE TAPER – MT4 NUMBER AND RANGE OF SPINDLE SPEEDS – (6): 75, 130, 240, 380, 660, 1200 rpm NUMBER AND RANGE OF SPINDLE FEEDS – (3): 0.10; 0.16; 0.25 mm/rev VERTICAL ARM TRAVEL SPEED – 1.3 m/min ARM ROTATION – 360 degrees MAIN MOTOR POWER – 2.2 kW LIFTING MOTOR POWER – 0.75 kW WORKTABLE DIMENSIONS – 510 x 380 x 305 mm MACHINE DIMENSIONS – 800 x 1800 x 2150 mm WEIGHT – 1400 kg Standard Equipment - Drill chuck B16 (3-16 mm) - Arbor for drill chuck B16/MT4 - Reducing sleeve MT4/MT3 - Drift key The price quoted is NET (excluding VAT and transport costs). Transport costs are not included. For more information, please contact us by phone or email. Feel free to check our offer on our website.

Stanje: novo, Leto izdelave: 2026, An industrial radial drilling machine features a simple and rigid design, allowing for a wide range of applications in hole processing such as drilling, reaming, countersinking, boring, and threading. Machine Description - The drill is designed for drilling, threading, and reaming operations; - Reduced vibrations due to a special structural design, including additional ribbing and reinforced cast iron; - Oil-lubricated gearbox equipped with ground and hardened gears made from high-quality steel alloy; - Its heavy weight and rigid structure provide stability and vibration-free operation; - Box table enables easy clamping and positioning of the workpiece; - Robust, precision-ground large-diameter column; - Ground lower plate suitable for machining larger components; - Height adjustment of the arm via motor drive; - Control panel positioned at the front of the machine for enhanced efficiency and ergonomic operation; - Mechanical clamping of the arm and head; - Easy height setting of the arm using an electric hoist motor; - Hydraulically operated feed and spindle drive; - Hydraulically powered spindle and feed mechanisms; - Ground column surface ensuring smooth, precise, and easy arm movement; - Ground and hardened arm guideway; - The machine is equipped with a manual lock for the head and the column arm; - Wide spindle speed range ensures precise and fast machining; Technical Specifications MAXIMUM DRILLING DIAMETER – 50 mm SPINDLE AXIS TO COLUMN DISTANCE – 350 - 1600 mm Lsdjg Rcd Ujpfx Ahuern SPINDLE AXIS TO TABLE DISTANCE – 320 - 1220 mm SPINDLE TRAVEL – 390 mm HORIZONTAL HEADSTOCK TRAVEL – 1250 mm VERTICAL ARM TRAVEL – 590 mm SPINDLE TAPER – MT5 SPINDLE SPEED (16 steps) – 25 – 2000 rpm FEED RANGE – (16) 0.04 - 3.2 mm/rev MAIN MOTOR POWER – 4.0/5.5 kW LIFTING MOTOR POWER – 1.5 kW MACHINE DIMENSIONS – 2500x1070x2840 mm WEIGHT – 3500 kg The listed price is NET. Shipping costs are not included. For more information, please contact us by phone or email. Please visit our website to view our full offer.

Stanje: rabljeno, potovalna razdalja osi X: 6.000 mm, pomik osi Y: 3.000 mm, pomik po osi Z: 1.000 mm, premer vretena: 150 mm, največja hitrost vretena: 2.800 obr/min, pomik osi W: 700 mm, HOD OSI X 6000 MM Lrjdpfx Aheyb Rzteujn HOD OSI Y 3000 MM HOD OSI Z 1000 MM HOD OSI W 700 MM ISO 50 MOČ MOTORJA VRETENA 51 KW HITROST VRTENJA VRETENA 2800 RPM PREMER VRETENASTEGA VODILA 150 MM CNC SIEMENS 840 D ROTACIJSKA MIZA 2000 X 2500 HOD V 1500 MM NOSILNOST 25 TON MENJALNIK ORODIJ Z 80 MESTI HLADILNI SISTEM PREKO VRETENA AVTOMATSKA ROTACIJSKA GLAVA 1 OS KF-D4 MODEL 2,5° ŠT. 02 PRITRDILNIH PLOŠČ 2000 X 5000 MM ODVAJALNIK OSTRUŽKOV

Leto izdelave: 2009, stanje: pripravljen za uporabo (rabljen), Travel X/Y/Z: 3200mm/1100mm/900mm, max. workpiece weight: 5000kg, table dimensions X/Y/Z: 3250mm/1220mm/1030mm. Spindle power: 45kW, speed: 6000rpm, tool holder: SK50, tool diameter: 125mm, tool length: 300mm, max. tool weight: 15kg, NC rotary table dimensions X/Y: 800mm/800mm. Machine dimensions X/Y: approx. 7800mm/4700mm, weight: approx. 25000kg, control: Siemens Sinumerik 810D Shopmill, operating hours: approx. 32000h, spindle hours: approx. 18000h. Includes chip conveyor and internal coolant supply. Documentation available. Inspection on site is possible. Lrodpfev Hrg Dex Ahusn