Donau Donaumeric 440 nakup rabljenega (2.570)

Stanje: rabljeno, Leto izdelave: 2007, Drilling capacity in steel (diameter): 40 mm Arm reach: 1050 mm Spindle speed: 15 - 2800 rpm Feed range: 0.075 - 0.45 mm/min Dimensions: 2450 x 1300 x 2300 mm Weight: 1500 kg Equipment: - Machine in top condition - Serviced and overhauled by factory service in 2026 Machine design: • Work table 1800 x 600 mm with 4 T-slots • Arm travel distance 1050 mm • Drill spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 18 mm T-slots at the rear of the machine base • 2 18 mm T-slots on the left side of the machine base • Thread cutting device • Centralized lubrication • Coolant system • Machine lamp • CE marking • Safety guard • USB interface Dimensions and travel distances: Tool holder: SK 40 Column diameter: 195 mm Table dimensions: 1800 x 600 mm Number of T-slots: 4 T-slot spacing: 125 mm Quill stroke (Z-axis): 200 mm Column stroke (W-axis): 410 mm Distance spindle nose – min. table top: 70 mm Max. table top: 680 mm Distance spindle nose – min. floor: 970 mm Max. floor: 1580 mm Drilling radius: 540 - 1590 mm Working table height: 900 mm Machining data: Drilling capacity, full material: Steel St 60 – Ø 40 mm Cast Iron GG 22 – Ø 50 mm Thread cutting: Steel St 60 – M36 Cast Iron GG 22 – M42 Main spindle drive: AC motor, frequency controlled, 5.5 kW at 100% duty cycle Speed range: 15 – 2800 rpm Max. torque: 250 Nm, constant from 15 – 2000 rpm Feed drives: X-axis – AC servo motor: 0.25 kW Y-axis – AC servo motor: 0.25 kW Z-axis – AC servo motor: 4.50 kW W-axis – AC servo motor: 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless: 5 – 2000 mm/min Accuracy: Positioning accuracy X/Y axis over 1200 mm: ± 0.075 mm Electrical data: Operating voltage / frequency: 400 V / 50 Hz Control voltage: 24 V Hydraulic unit for clamping: 0.75 kW Total connected load: 13.0 kVA Weight of Danumeric 440 (without packaging, with table 1800 x 600 mm): 2800 kg CNC control: Axes: 3 (X, Y, Z) Processor: 32-bit CPU Display: TFT flat screen, backlit, easily readable from all sides, 215 x 160 mm Position indication: Cartesian or polar, absolute or incremental units, unit in mm or inch as well as degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining type, material-dependent cutting data recommendations Tool management: max. 500 tools Subroutine technology: yes Fjdpfoy Nd T Hsx Ahmogc Standard software options: conversational programming, 38 zero point offsets, rotation and mirroring, Teach-In for X, Y, Z, restart in the program with selectable entry functions Zero point determination: cycles for determining zero points by manually probing the workpiece for: - Arbitrary clamped rectangular parts - Arbitrary clamped round parts - Alignment of cast and flame-cut parts - Angle position detection on round parts by probing reference edges/surfaces Test-graphic: graphical display of drilling patterns

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device Fsdexn A Spopfx Ahmogc • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, DONAU DANUMERIC 440, letnik 1998 Fgodsy Txlrjpfx Ahmec Tehnični podatki: - Miza 1800 x 600 mm, 4 T-utori - Polmer vrtanja 540 – 1590 mm - Vpenjalo vretena SK40 - Hitrost vretena 15 – 2800 min⁻¹ - Moč motorja 5,5 kW - Teža cca 2.800 kg

Stanje: pripravljen za uporabo (rabljen), Donau Danumeric 440 Radial Drilling Machine Drilling capacity (steel): Ø 40 mm Thread cutting: up to approx. M36 (depending on material) Tool holder: SK 40 Spindle speed: approx. 15 – 2,800 rpm (stepless adjustment) Feed: stepless, approx. 5 – 2,000 mm/min Quill stroke (Z): 200 mm Column travel (W): 410 mm Arm travel: 1,050 mm Drilling radius: approx. 540 – 1,290 mm Arm swivel range: approx. 330° Column diameter: 195 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For foreign customers, a net invoice can be issued. A valid VAT ID number is required. Subject to prior sale. Visit our shop to view more of our offers. All company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Fodpfeyrdc Sex Ahmjgc Deviations from technical data and errors in the description may occur and are subject to change.

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), Na voljo je CNC radialni vrtalni stroj, ki je bil leta 2018 generalno obnovljen. Delovno območje X/Y: 1050 mm/1800 mm, zmogljivost vrtanja v jeklo: 40 mm, zmogljivost vrtanja v litoželezo: 50 mm, rezanje navojev: M36-M45, vpenjalo za orodje: SK40, območje vrtljajev: 15 obr/min-2800 obr/min, hod pinole Z: 200 mm, hod stebra W: 410 mm, vpenjalna površina mize X/Y: 1800 mm/600 mm, hitrost podajanja: 5 mm/min-2000 mm/min, hitra pomika X/Y: 7,5 m/min, upravljanje: CNC upravljanje. Opremljen z 360° vrtljivo napravo, motoriziranim vpenjanjem orodja, trivilčnimi tokali za okrogle dele, posodobljenim LCD zaslonom, obsežnim paketom orodij. Teža: cca 2900 kg, skupne mere X/Y/Z: cca 2600 mm/1900 mm/2950 mm. Ogled možen po dogovoru. Fgsdpfx Ahoy Tn Ntomec

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Specification • Work table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping system • Stepless speed programming • Stepless quill feed via three-phase servomotor • 2 x 18 mm T-slots on the rear of the machine base • 2 x 18 mm T-slots on the left side of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine light • CE marking • Safety device • USB interface Dimensions and Travels Tool holder type SK 40 Fgjdpoyxw Ddsfx Ahmec Column diameter 195 mm Table dimensions 1800 x 600 mm Number of T-slots 4 T-slot spacing 125 mm Quill travel (Z-axis) 200 mm Column travel (W-axis) 410 mm Distance spindle nose to table top (min.) 70 mm Distance spindle nose to table top (max.) 680 mm Distance spindle nose to floor (min.) 970 mm Distance spindle nose to floor (max.) 1580 mm Drilling radius 540 – 1590 mm Working table height 900 mm Machining Capacities Drilling capacity full material St 60: Ø 40 mm GG 22: Ø 50 mm Thread cutting St 60: M36 GG 22: M42 Main Spindle Drive AC motor, frequency controlled 5.5 kW at 100% duty cycle Speed range 15 – 2800 rpm Torque up to 250 Nm Constant torque from 15 – 2000 rpm Feed Drives X-axis AC servo motor 0.25 kW Y-axis AC servo motor 0.25 kW Z-axis AC servo motor 4.50 kW W-axis AC servo motor 2.50 kW Rapid traverse speeds (X/Y/Z): 7.5 / 7.5 / 5 m/min Rapid traverse (W): 3 m/min Feeds stepless 5 – 2000 mm/min Precision Positioning accuracy X/Y-axis over 1200 mm ± 0.075 mm Electrical Data Operating voltage/frequency 400V / 50Hz Control voltage 24V Hydraulic unit for clamping 0.75 kW Total connected load 13.0 kVA Weight Danumeric 440 (without packaging) with 1800 x 600 mm table 2800 kg CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat panel, back-lit, easily readable from all sides, 215 x 160 mm Position display: Cartesian or polar, absolute or incremental values Unit of measurement: mm or inch, also in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data recommendations Tool management: up to 500 tools Subprogram technique: yes Machining Cycles Standard software options: dialog programming, 38 zero point shifts, rotate and mirror, Teach-In for X, Y, Z, program restart with selectable entry options Zero point determination: cycles for determining zero points by manual touch probe for: - arbitrarily fixtured rectangular parts - arbitrarily fixtured round parts - alignment of cast or flame-cut parts - angle determination on round parts by probing reference edges/surfaces Test graphics: graphical display of drilling patterns

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine configuration • Work table 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed control • Infinitely variable quill feed via AC servo motor • 2 T-slots 18 mm on rear of machine base • 2 T-slots 18 mm on left side of machine base • Thread cutting device • Central lubrication system • Coolant system • Machine lamp • CE marking • Safety guard Dimensions and Travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column travel (W-axis) mm 410 Distance spindle nose – min. table top mm 70 Distance spindle nose – max. table top mm 680 Distance spindle nose – min. floor mm 970 Distance spindle nose – max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity (solid) St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency controlled kW 5.5 at 100% duty cycle Speed range: min-1 15 – 2800 Torque: Nm max. 250 Constant from: min-1 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speed (W): m/min 3 Feeds infinitely variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y-axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental Units: mm or inch, or in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions according to machining type, material-dependent cutting data recommendations Fgedpfx Ahoyuqmiemjc Tool management: max. 500 tools Subprogram technology: yes Machining Cycles Standard software options: Conversational programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for zero point determination by manual probing of the workpiece for: - any clamped rectangular parts - any clamped round parts - centering of cast and flame-cut parts - angular position detection on round parts by probing reference edges/surfaces Test graphics Graphical display of drilling patterns

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives Fgjdpfx Asu Aa I Sjhmoc X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Danumeric 440 – Fully Refurbished and Digitized in 2024 Machine Specifications • Work Table: 1800 x 600 mm with 4 T-slots • Arm Travel: 1050 mm • Drilling Spindle: SK 40 with automatic tool clamping • Stepless speed programming • Stepless quill feed via three-phase servo motor • 2 x 18 mm T-slots at rear of machine base • 2 x 18 mm T-slots on left side of machine base • Tapping attachment • Centralized lubrication • Coolant system • Machine lamp • CE certification • Safety guard • USB interface Dimensions and Travel Tool Holder SK 40 Column Diameter mm 195 Table Dimensions mm 1800 x 600 Number of T-Slots 4 Distance between T-Slots mm 125 Quill Stroke (Z-axis) mm 200 Column Stroke (W-axis) mm 410 Spindle nose – Table top, min. mm 70 Spindle nose – Table top, max. mm 680 Spindle nose – Floor, min. mm 970 Spindle nose – Floor, max. mm 1580 Drilling Radius mm 540 - 1590 Table Height mm 900 Machining Capacities Drilling Capacity (solid): Steel 60: Ø 40 mm Cast Iron GG 22: Ø 50 mm Thread Cutting: Steel 60: M36 Cast Iron GG 22: M42 Main Spindle Drive AC Motor, frequency-controlled kW 5.5 at 100% duty cycle Speed Range: min⁻¹ 15 - 2800 Torque: Nm max. 250 Constant from: min⁻¹ 15 – 2000 Feed Drives X-Axis – AC Servo Motor kW 0.25 Y-Axis – AC Servo Motor kW 0.25 Z-Axis – AC Servo Motor kW 4.50 W-Axis – AC Servo Motor kW 2.50 Fgedpfxou Dg D Aj Ahmsc Rapid Traverse (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid Traverse (W): m/min 3 Infinitely variable feeds mm/min 5 – 2000 Accuracy Positioning Accuracy X-, Y-Axis Over 1200 mm mm ± 0.075 Electrical Data Operating voltage/frequency V/Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) With 1800 x 600 mm table kg 2800 CNC Control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Display: TFT flat screen, backlit, excellent readability from all angles 215 x 160 mm Position Indication: Cartesian or polar; values absolute or incremental Units: mm or inch, or degrees Interpolation: 2 axes (X, Y) Technology Database: • Tool management • Tool suggestions by machining type • Material-dependent cutting data recommendations • Tool library: up to 500 tools • Subprogramming: Yes Machining Cycles Standard Software Options: • Conversational programming • 38 zero offset memories • Rotation and mirroring • Teach-in for X, Y, Z • Program restart with selectable entry points Zero Point Determination: • Cycles for establishing zero points by manual touch-off on workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of cast and flame-cut parts - Angle detection for round parts by referencing edges or surfaces Test Graphics: • Graphical display of drilling patterns Data Interfaces: • USB

Stanje: dober (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Fsdpormkfnefx Ahmegc Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Machine Features • Working table 1800 x 600 mm with 4 T-slots • Arm travel 1050 mm • Drilling spindle SK 40 with tool clamping device Fgjdpsvv Spkjfx Ahmsc • Infinitely variable speed programming • Infinitely variable quill feed via three-phase servo motor • 2 T-slots (18 mm) at the rear of the machine base • 2 T-slots (18 mm) on the left of the machine base • Thread cutting device • Central lubrication • Coolant system • Machine lamp • CE marking • Safety device • USB interface Dimensions and Travel Tool holder SK 40 Column diameter mm 195 Table size mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle nose – min. table top mm 70 max. table top mm 680 Distance spindle nose – min. floor mm 970 max. floor mm 1580 Drilling radius mm 540 – 1590 Working table height mm 900 Machining Data Drilling capacity, solid St 60 Ø 40 mm GG 22 Ø 50 mm Thread cutting St 60 M 36 GG 22 M 42 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range: min⁻¹ 15 – 2800 Torque Nm max. 250 Constant from min⁻¹ 15 – 2000 Feed Drives X-axis – AC servo motor kW 0.25 Y-axis – AC servo motor kW 0.25 Z-axis – AC servo motor kW 4.50 W-axis – AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min 3 Stepless feeds mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis over 1200 mm mm ± 0.075 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC Control Axes: 4 (X, Y, Z, W), extendable Processor: 32-bit CPU Monitor: TFT flat screen, backlit, clearly readable from all sides, 215 x 160 mm Position display: Cartesian or polar, measurements absolute or incremental, units in mm or inches or degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, tool suggestions by machining type, material-dependent cutting data suggestions Tool Management: max. 500 tools Subprogram capability: yes Machining Cycles Standard Software Options: Dialog programming, 38 zero point shifts, rotation and mirroring, Teach-In for X, Y, Z, program restart with selectable functions for targeted re-entry Zero Point Determination: Cycles for determining zero points by manual probing for: – Arbitrarily clamped rectangular parts – Arbitrarily clamped round parts – Centering of cast and flame-cut parts – Angle detection on round parts by probing reference edges or surfaces Test graphics: Graphical display of drilling patterns Data interfaces: USB

Stanje: dober (rabljeno), Leto izdelave: 1988, Rapid Radial Drilling Machine Fedpfx Ahoikvcasmogc Manufacturer: Donau Model: DR 40 DIGI CONTROL: NC Control Year of manufacture: 1988 APPLICATIONS – DRILLING Drilling capacity in steel (full hole): 40 mm Throat depth (max): 800 mm SPINDLE / HEAD Spindle speed (min): 335 rpm Spindle speed (max): 1800 rpm Number of speed ranges: 2 Tool taper: MT 4 SPECIFICATIONS Table surface: 1200 x 750 mm ELECTRICAL SPECIFICATIONS Supply voltage: 400 V Frequency: 50 Hz DIMENSIONS / WEIGHTS Width: 2500 mm Depth: 1250 mm Overall height: 2500 mm Weight: 2.6 t Motor power: 6 kW

Stanje: rabljeno, zmogljivost vrtanja: 23 mm, Oprema: Na voljo je tipska ploščica, Hitro radialno vrtalni stroj – stebrni vrtalni stroj Donau Werkzeuge DR23 radialni vrtalni stroj Serijska številka 2062-4 Obratovalna napetost: 380 V z nevtralnim vodnikom, 50 Hz, 3 faze Vrtalna zmogljivost: do pribl. Ø 50 mm Območje vrtljajev: 58 - 1275 min⁻¹ Naprava za rezanje navojev, izhod 920 mm Fgodpfx Aowybqqehmoc Strojna svetilka Osnovna plošča velikost mize pribl. 1100x400 mm Moč motorja pribl. 1,5 kW, brez naprave za hlajenje 2 T-utori zadaj levo Teža: pribl. 1.200 kg Nosilec je vrtljiv, nastavljiv po višini ter pomičen po dolžini in globini. S pritiskom na gumb je možno želeno pozicijo zakleniti z vrtenjem, vlečenjem ali potiskanjem. Ogled stroja pod napetostjo je mogoč po predhodnem dogovoru. Za vse tehnične podatke so možne tipkarske napake in spremembe. Cena po dogovoru Prodaja izključno v državah EU.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Distances Tool Holder: SK 40 Table Size: mm 4000 x 800 Number of T-slots: 6 T-slot spacing: mm 140 Distance, spindle lower edge (min.): mm 140 Distance, table upper edge (max.): mm 740 Drilling radius (min.): mm 540 Drilling radius (max.): mm 1590 U-axis travel: mm 2600 Y-axis travel: mm 1050 Quill stroke (Z-axis): mm 200 Column stroke (W-axis): mm 400 Machining Data Drilling capacity, solid material St 60: mm 40 Drilling capacity, solid material GG 22: mm 50 Tapping capacity St 60: M 36 Tapping capacity GG 22: M 42 Main Spindle Drive AC motor, frequency-controlled: kW 5.5 at 100% duty cycle Spindle speed range: rpm 15 - 2800 Maximum torque: Nm 250 Constant torque range: rpm 15 – 200 Feed Drives X-axis - AC servo motor: kW 0.25 Y-axis - AC servo motor: kW 0.25 Z-axis - AC servo motor: kW 4.50 W-axis - AC servo motor: kW 2.50 U-axis - AC servo motor: kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Infinitely variable feed rates: mm/min. 5 - 2000 Feed force: N 12000 Accuracy Positioning accuracy X, Y-axis over 1200 mm: mm ±0.075 Repeatability X, Y-axis: mm ±0.03 Positioning accuracy Z-axis: mm ±0.05 Repeatability Z-axis: mm ±0.03 Positioning accuracy W-axis: mm ±0.05 Repeatability W-axis: mm ±0.03 Electrical Data Operating voltage / frequency: V / Hz 400 / 50 Control voltage: V 24 Total connected load: kVA 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), extendable Display: TFT flat panel, backlit, excellent readability from all angles Position indications: Cartesian or polar, dimensions absolute or incremental Unit of measurement: mm or inch / degrees Interpolation: 2 axes (X, Y) Technology database: Tool management, tool recommendations by machining operation, cutting data recommendations by material Tool management: max. 500 tools Subroutine technique: yes Machining cycles: Cycles for centering, drilling, tapping, reaming, countersinking, and boring; freely programmable cycle for special tools; dwell time possible per cycle Chip breaking/chip removal: Possible in drilling cycle Drilling patterns: row, circle, matrix Basic software: Dialog programming, 38 zero point offsets, rotation and mirroring, teach-in for X, Y, Z, program restart with selectable entry points Zero-point determination: Cycles for determining zero points by manual probing of the workpiece for: - Arbitrarily clamped rectangular parts - Arbitrarily clamped round parts - Centering of castings and flame-cut parts Fgodpfx Ahsv If T Tjmoc - Angle detection on round parts by probing reference edges or surfaces Data interfaces: USB port Paintwork (new paint) Standard paint, two-component textured finish Machine upper section: light grey RAL 7035 Machine base: signal blue RAL 5005 Documentation Operating and programming manual Electronic wiring diagram Spare parts drawings Test protocol for mechanics, electronics, and safety device

Stanje: rabljeno, Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 4.000 mm, dolžina pomika po osi Y: 1.050 mm, dolžina podajanja os Z: 200 mm, zmogljivost vrtanja: 40 mm, poteza s peresom: 200 mm, premer tulec: 80 mm, Dimensions and Travel Paths Fsdpfxoy Ttrte Ahmegc Tool Holder: SK 40 Table Dimensions (mm): 4000 x 800 Number of T-slots: 6 T-slot spacing (mm): 140 Distance Spindle Nose – Table Top (min./max. mm): 140 / 740 Drilling Radius (min./max. mm): 540 / 1590 Travel U-Axis (mm): 2600 Travel Y-Axis (mm): 1050 Quill Stroke (Z-Axis, mm): 200 Column Stroke (W-Axis, mm): 400 Machining Capabilities Drilling Capacity (solid material): St 60: 40 mm / GG 22: 50 mm Thread Cutting: St 60: M36 / GG 22: M42 Main Spindle Drive AC Motor, frequency controlled: 5.5 kW at 100% ED Speed Range (rpm): 15 - 2800 Max. Torque (Nm): 250 Constant torque from (rpm): 15 – 200 Feed Drives X-Axis – AC Servo Motor: 0.25 kW Y-Axis – AC Servo Motor: 0.25 kW Z-Axis – AC Servo Motor: 4.50 kW W-Axis – AC Servo Motor: 2.50 kW U-Axis – AC Servo Motor: 2.50 kW Rapid Traverse Speed (X/Y/Z) (m/min): 7.5 / 7.5 / 5 Rapid Traverse Speed (U/W) (m/min): 7.5 / 3 Infinitely variable feeds (mm/min): 5 - 2000 Feed Force (N): 12000 Accuracy Positioning Accuracy X-, Y-Axis over 1200 mm (mm): ± 0.075 Repeatability X-, Y-Axis (mm): ± 0.03 Positioning Accuracy Z-Axis (mm): ± 0.05 Repeatability Z-Axis (mm): ± 0.03 Positioning Accuracy W-Axis (mm): ± 0.05 Repeatability W-Axis (mm): ± 0.03 Electrical Data Operating Voltage / Frequency (V / Hz): 400 / 50 Control Voltage (V): 24 Total Connected Load (kVA): 13.0 CNC Control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat panel, backlit, clearly visible from all angles Position Display: Cartesian or polar, absolute or incremental Units: mm or inch; angles in degrees Interpolation: 2 axes (X, Y) Technology Database: Tool management, suggests suitable tools by machining operation, cutting data recommendations based on material Tool Management: up to 500 tools Subprograms: Yes Machining Cycles: Centering, drilling, tapping, reaming, countersinking, boring, custom cycle for special tools, dwell time possible in any cycle Chip Breaking / Deburring: possible in drilling cycle Hole Patterns: Linear array, hole circle, matrix Base Software: Conversational programming, 38 zero point offsets, rotation/mirroring, teach-in for X, Y, Z, restart in program with selectable re-entry points Zero Point Determination: Cycles to determine zero points by manual probing for: - Randomly clamped right-angle parts - Randomly clamped round parts - Alignment of cast and flame-cut parts - Angle positioning for round parts by touching reference edges/surfaces Data Interfaces Paintwork with signs of use Standard paint, two-component textured finish Machine upper part: light grey RAL 7035 Machine base: light blue, RAL 5012 Documentation Operating and programming manual Electrical circuit diagram Spare parts drawings Inspection protocol for mechanics, electrics, and safety features

Stanje: rabljeno, Leto izdelave: 1971, Technical details: Drilling capacity in steel (diameter): 23 mm Max. workpiece height: ./x. 2 mm Drilling capacity in cast iron: Ø 26 mm Spindle taper: MT 3 Fsdpsv Ay T Dsfx Ahmogc Quill stroke: 135 mm (manual/automatic) Spindle speed: 7 steps rpm Feed range: mm/rev Table size: 1200 x 500 mm Table clamping surface: 1070 x 400 mm Total power requirement: 3.55 kW Machine weight approx.: 1.4 t Machine dimensions approx. (LxWxH): 1.7 x 1.2 x 2.2 m Arm: - Vertical adjustment: 450 mm, horizontal adjustment: 610 mm - Swivel range 360°, hydraulically lockable Right- and left-hand rotation for tapping with automatic reversal Operation via control panel Coolant tank with pump

Stanje: rabljeno, Leto izdelave: 1960, Tehnične podrobnosti: Fedpjx Afn Nefx Ahmogc Največja višina obdelovanca: 600 mm Izvesek: pribl. 700 mm Vrtalna zmogljivost v jeklu (premer): 25 mm Velikost mize: 1100 x 400 mm Stroj se trenutno nahaja v tehničnem oddelku. Stroj zato NI objavljen/razstavljen. Dela na popravilu so še v teku.... *

Stanje: rabljeno, Leto izdelave: 1971, Dolžina rezkanja 1750 mm Širina rezkanja 260 mm Modul - maks. 10 mm Dimenzije mize vklj. z vodno odkapno žlebo 460 x 2100 mm Upenjalna površina mize: 250 x 1850 mm Maks. širina rezkarja 100 mm Pomik rezkalnega vozička, brezstopenjsko 0 - 500 mm/min. Hitri pomik 3000 mm/min Rezkalna glava - nagibna + / - 30° Območje vrtljajev rezkalne vretena, v 9 stopnjah 29 - 178 obr/min Rezkalna glava nagibna na obe strani za poševno ozobljenje 30° Teža stroja ca. 4 t Prostorska potreba ca. 4 x 1,85 x 1,85 m Fedpfx Aheylpzyjmegc Oprema/Dodatki - 7 primežev - Menjalna kolesa - Vpenjalna sredstva - Dokumentacija

Stanje: novo, SPS krmilna plošča menjalnika Novo za staro Za samostojno montažo ali vgradnjo s strani enega od naših serviserjev Fodpfey Rkkhjx Ahmogc

Stanje: novo, Nadomestni deli za hitre radialne vrtalke Donau: Donau DR, Donau Danuflex, Donau Danumeric, Donau Danusys, Donauflex, Donaumeric. Fgsdpfx Aey Ri H Ishmec

Stanje: skoraj kot novo (rabljeno), Primerno za Donau DR 28Z, DR 40Z, DR 40 Digi, Danuflex 128 Fedpey Ri Hnsfx Ahmjgc

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, poteza s peresom: 190 mm, hitrost vretena (min.): 41 obr/min, največja hitrost vretena: 1.800 obr/min, skupna masa: 1.920 kg, teža obdelovanca (maks.): 17 kg, najv. debelina jeklene pločevine: 32 mm, vrtilni moment: 250 Nm, višina mize: 900 mm, Used DONAU Rapid Radial Drilling Machine Type DR 32 - Fully overhauled by vaumatec in 2022 - Equipped with SPECIAL TABLE PLATE (clamping surface 1400 x 1000 mm with coolant channel and drain, as well as 4 support feet to relieve the table frame) Technical data: Drilling capacity (solid material): St 60/E335, Ø 32 mm (with feed rate 0.20 mm/rev): GG 22, Ø 45 mm Tapping capacity: St 60/E355, M26 Tapping capacity: GG22, M35 Tool holder: MT4 Column diameter: Ø 195 mm Spindle nose to table distance (min./max.): 260/660 mm Table height: 900 mm Quill stroke: 190 mm Column travel: 400 mm Spindle speeds, Range I: 41-1800 rpm Feeds: 0.1-0.15-0.20-0.3 mm/rev Spindle torque: max. 250 Nm Arm travel resistance (radial): 25 N Arm travel resistance (axial): 25 N Clamping force (radial): 3500 Nm Clamping force (axial): 5500 N Feed force: 7500 N Fgsdpfx Asrn Riqehmsc Max. permissible mass: 17 kg Max. permissible moment of inertia: 0.002176 kgm Workpiece: Max. table load: 1000 kg Center of gravity: centered on the working surface

Stanje: dober (rabljeno), Tip stroja: Donau radialni vrtalni stroj DR 32 Leto izdelave: neznano Vpenjanje MK 4 Hitrost vretena: 41 – 1800 1/min Naprava za vrezovanje navojev Črpalka za hladilno tekočino Teža: pribl. 2500 kg Fedpfx Ajy Tpq Ejhmogc Vrtalna zmogljivost v jeklu: 32 mm Velikost mize: pribl. 1200x600 mm

Stanje: pripravljen za uporabo (rabljen), DONAU DR 23 - Hitrotekoča radialna vrtalna naprava - Vrtalne zmogljivosti v jeklu: pribl. 28 mm - Izsev: 700 mm Fgsdpfxoy Uv Tvs Ahmjc - Morsejev stožec MK 3 - Območje vrtljajev: 70-1550 o/min (menjalnik) - Avtomatski podajniki: 0,075-0,3 mm - Naprava za rezanje navojev - Vrtalna globina pribl. 130 mm - Hidravlična blokada - Dokumentacija Dimenzije: DxŠxV 2x1,7x1,9 metra / Teža 1900 kg Pridržujemo si pravico do napak ali sprememb.

Stanje: rabljeno, Dimenzije mize 500 x 1.200 mm Število T-utorov 30 Fgsdpfoy Umg Tex Ahmec Razmak T-utorov 125 mm Razdalja med vretenom in mizo 110 - 760 mm Radij nihanja 535 - 1.135 mm Območje vrtanja 600 mm Delovna višina 800 mm Hod pinole 200 mm Višinsko nastavljanje glave za vrtanje 450 mm Število stopenj hitrosti 18 Obseg hitrosti 35 - 1.800 obr/min Zmogljivost vrtanja v ST 60 – polni premer Ø40 mm Zmogljivost vrtanja v GG 22 – polni premer Ø50 mm Po naši oceni je stroj v dobrem rabljenem stanju in ga je mogoče po dogovoru ogledati pod napetostjo. Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesno prodajo!