UMENJA
DMG CTX 510 eco

Leto izdelave

2014

Stanje

Rabljeno (popolnoma funkcionalen)

Lokacija

Baden-Württemberg Nemčija

Spremljaj dražbo

Podatki o stroju

Oznaka stroja:: UMENJA

Proizvajalec:: DMG

Model:: CTX 510 eco

Leto izdelave:: 2014

Stanje:: pripravljen za uporabo (rabljen)

Funkcionalnost:: popolnoma funkcionalen

Obratovalne ure:: 3.324 h

Tehnične podrobnosti

Premer struženja:: 465 mm

Potovalna razdalja osi X:: 300 mm

Pomik po osi Z:: 1.050 mm

Največja hitrost vrtenja:: 3.250 obr/min

zagotovitev

Lokacija:: Baden-Württemberg, Nemčija – Razdalja: pribl. 613 km

Razpoložljivost:: takoj po zaključku dražbe

Dobavni pogoji:: EXW

Stroški demontaže in nakladanja:

Prevzem na lokaciji:
brezplačno

Stroški pošiljanja:

Opis

TECHNICAL DETAILS
Max. swing diameter: 680 mm
Max. swing diameter over cross slide: 465 mm
Max. turning diameter: 465 mm
X-axis travel: 300 mm
Z-axis travel: 1,050 mm
CNC control: SIEMENS SINUMERIK 840D

Main spindle
Spindle nose: 220h5 mm
Bar capacity: 76/90 mm
Front bearing spindle diameter: 140 mm
Chuck sizes: 250 mm
Drive power (40/100% DC): 33/22 kW (AC)
Max. torque (40/100% DC): 630/420 Nm
Max. speed: 3,250 rpm

Tool turret
Number of tool stations: 12
Driven tools: 6
Tool holder: VDI 40
Shank diameter: 40 mm
Drive power (40% DC): 8.4 kW
Max. torque: 20 Nm
Max. speed driven tools: 4,000 rpm

Tailstock
Quill travel: 850 mm
Centre taper: MT 4
Quill force: 1,200 daN

Guides
Ballscrew X-/Z-axis (D x P): 40 x 10 mm

MACHINE DETAILS
Machine weight with chip conveyor: 8,100 kg
Ergonomic operator panel: SlimlinePanel
Chip conveyor: Hinged belt chip conveyor
Coolant pressure: 5 bar
Reinforced coolant pump: 12 bar

Connected load: 50 kVA

Oglas je bil avtomatsko preveden. Možne so napake pri prevodu.

Obdelava plačil

Dodatni stroški nakupa:: 18 %

Plačilni pogoji:: 100 % predplačilo

Načini plačila:: Bančno nakazilo

Račun se izdaja v višini najvišje ponudbe, pri čemer se prištejejo morebitni stroški demontaže/nakladanja, stroški pošiljanja ter dodatni stroški nakupa in zakonski DDV.

Podrobnosti ponudbe

ID oglasa:: A19489601

Referenčna številka:: AUC-2506194

Posodobitev:: nazadnje dne 03.07.2025

Ekskluzivna ponudba:: na voljo samo na dražbi

Opazovati

Kontakt

Kontaktna oseba: Cedric Schuhmann

ID stroja: 19489601

+49 201 8... oglasi

Telefon: +49 201 857 861 77

Zaščita kupca Machineseeker

Varno plačilo prek fiduciarniega računa

Strogo preverjeni prodajalec

Osebna in večjezična podpora

Izplačilo kupnine se izvede šele po predaji blaga.

ogled

Možen ogled

Stroj pod napetostjo

Machineseeker v splošnem priporoča ogled rabljenih strojev.

Vsi podatki so vneseni po najboljšem vedenju in vesti – prepričajte se na kraju samem.

Ponudnik

Profesionalni komercialni prodajalec

Nemčija

Razdalja: pribl. 612 km

Tukaj bi lahko stala vaša naprava

Dražba s številko 1

Prodate v samo nekaj tednih!

Prodajate po najvišji ceni!

Prodajate brez fiksnih stroškov in tveganj!

ali pokličite +49 201 857 861 10

Razpravljati o sodelovanju

Ti oglasi bi vas prav tako lahko zanimali.

Mali oglas

Buzica

530 km

DMG CTX 510 ECO
DMGCTX 510 ECO

Pokliči

Stanje: rabljeno, Leto izdelave: 2008, DMG - CTX 510 ECO - 2008 DMG ECOLINE - sistem FANUC - z gnanim orodjem - os X 300 mm - os Z 1050 mm - maksimalni premer obdelave 465 mm - maksimalni premer struženja 680 mm - premer vretena 140 mm - maksimalno število vrtljajev vretena 3250 - revolverska glava z 12 pozicijami - cca. 17+ nosilcev za orodja - transporter ostružkov - 15500+ delovnih ur - teža 7800 kg Hnodsyuldcopfx Adkoi

Poglej podrobnosti

Mali oglas

Ubstadt-Weiher

584 km

Center stružnica
ColchesterMaster 2500

4.500 €

VB plus DDV

Pokliči

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, izvrtina vretena: 42 mm, višina središča: 165 mm, širina na sredini: 635 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 30 obr/min, skupna masa: 900 kg, Dear Sir or Madam, For sale is a Colchester Master 2500 lathe equipped with a Heidenhain digital readout. The machine is fully functional and can be inspected and tested on site. Availability: immediately Centre distance: 635 mm Hodpfxou St S Aj Adkoni Centre height over bed: 165 mm Centre height over cross slide: 105 mm Spindle bore: 42 mm Spindle speed: 30 - 2500 rpm, 16 steps Tailstock taper: MT 3 Drive power: 3.7 kW Required floor space (LxWxH): 1700 x 880 x 1200 mm Weight: approx. 850 kg

Poglej podrobnosti

Mali oglas

Nemčija

682 km

Stroj za hladno valjanje
EXCELLOXK 875

Pokliči

Mali oglas

Göppingen

488 km

Industrijski roboti
KUKAKR 210

14.500 €

Fiksna cena plus DDV

Pokliči

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 2.696 mm, širina krmilne omare: 560 mm, višina krmilne omare: 1.060 mm, vrsta vhodnega toka: Enosmerni tok, teža obdelovanca (maks.): 1.111 kg, dolžina elektro omare: 800 mm, globina grla: 2.696 mm, Product description: 24 units in stock Industrial KUKA KR 210 R2700 Prime KR C4 Manufacturer: KUKA Year of manufacture: 06/2014 Serial number: 635949 Type: KRC4 Payload: 210 kg Axes: 6 Hnsdpfoqv D Tpsx Adkoi Reach: 2696 mm Repeatability: ± 0.06 mm Scope of delivery: - Robot - Control cabinet - Cables - Teach pendant Prices are net plus VAT Can be inspected under power at any time. The robot is in very good used condition. Delivery time: Immediate – subject to prior sale Upon delivery, you will receive an invoice showing VAT. Item condition "New" – may be without original packaging, minor storage marks possible, delivery as shown. Item condition "Used" – items show signs of use, these are therefore not described in further detail.

Poglej podrobnosti

Mali oglas

Industrijski roboti KUKA VKR210 R2700 (1) KRC2 ED05

Freiberg am Neckar

534 km

Industrijski roboti
KUKAVKR210 R2700 (1) KRC2 ED05

Pokliči

Stanje: kot nova (razstavni stroj), Leto izdelave: 2012, številka stroja/vozila: 925625, KUKA unused surplus stock KUKA VKR210 R2700 Year of manufacture: 03/2012 Payload: 210 kg Reach: 2700 mm Weight: 1412 kg Serial number: 925625 Includes connection cables: X21/X31 (00-108-948) 25 m and X20/X30 (00-104-744) 25 m Control cabinet KRC2 ED05, serial number: 93863 Weight: 203 kg Year of manufacture: 12/2012 Teach pendant 00-107-264 VKRC2, used, fully functional / Serial number: 0000562 Robot data: Repeatability: ± 0.06 mm Axis 1: ± 185° Axis 2: -140° / -5° Axis 3: -120° / 155° Axis 4: ± 350° Axis 5: ± 122.5° Axis 6: ± 350° Robot axis speeds in °/s: Axis 1: 105°/s Axis 2: 107°/s Axis 3: 114°/s Axis 4: 136°/s Hnedpfsrdh T Dox Adkji Axis 5: 129°/s Axis 6: 206°/s

Poglej podrobnosti

Mali oglas

Center CNC za struženje in rezkanje INDEX G 400

Bühl

587 km

Center CNC za struženje in rezkanje
INDEXG 400

Pokliči

Stanje: rabljeno, Leto izdelave: 2002, Maximum turning diameter: 420 mm Turning length: 1250 mm Control: INDEX C 200-4 D Swing diameter: 630 mm Hodpot U R Hzefx Adkoni Travel X1: 320 mm Travel Z1: 1250 mm Travel X2: 170 mm Travel Z2: 1250 mm Travel X3: 320 mm Travel Z3: 1250 mm Maximum main spindle speed: 3,000 rpm Main spindle drive: 53 kW Spindle bore: 102 mm Spindle nose: DIN 55026 size 11 Spindle torque: 675 Nm Counter spindle – max. speed: 3,000 rpm Counter spindle drive: 53 kW Counter spindle – spindle bore: 102 mm Counter spindle – spindle nose: DIN 55026 size 11 Counter spindle – torque: 675 Nm Counter spindle travel: 1250 mm Feed force X1: 14,000 / Z1: 14,000 N Rapid traverse X1: 20 / Z1: 40 m/min Feed force X2: 8,600 / Z2: 14,000 N Rapid traverse X2: 20 / Z2: 40 m/min Feed force X3: 14,000 / Z3: 14,000 N Rapid traverse X3: 20 / Z3: 40 m/min Number of turret stations Rev. 1 = 12 Number of turret stations Rev. 2 = 10 Number of turret stations Rev. 3 = 12 Number of live tool stations: 12 / 10 / 12 Maximum speed of driven tools: 6,000 rpm Torque: 36 / 21 / 36 Nm Tool holder: DIN 69880 Tool holder diameter: 40 x 63 mm Total power requirement: 120 kW Machine weight approx: 19 t Machine dimensions L x W x H: 5.77 x 2.47 x 2.62 m Accessories: - HAINBUCH segmented collet chuck on the main spindle - HAINBUCH collet chuck, SPANNTOP SP on the counter spindle - Various toolholders (including for driven tools) - Chip conveyor - Coolant system Note: All 3 tool turrets are prepared for through-tool coolant (IKZ), but the high-pressure coolant unit is not included with the machine.

Poglej podrobnosti

Mali oglas

Stroj za končno obdelavo SEMA END 70-1-2-S-100-NC-A

Nemčija

682 km

Stroj za končno obdelavo
SEMAEND 70-1-2-S-100-NC-A

Pokliči

Stanje: rabljeno, Leto izdelave: 2008, Technical details: Workpiece diameter - max.: 29 mm Hedpfx Adjlqac Sekjni Workpiece diameter - min.: 26 mm Workpiece length: 66 mm The system was originally supplied for the following workpiece dimensions: Diameter 26 mm - 29 mm Length 65 mm - 66 mm By using interchangeable parts in the clamping device, handling, etc., diameters up to approx. Ø50 mm should be feasible. An overall length of nearly 400 mm should be possible with some modifications. This also depends on tool lengths, machining lengths on the component, etc.

Poglej podrobnosti

Mali oglas

CNC stružnica DMG GILDEMEISTER CTX alpha 500 V6

Sonnenbühl

507 km

CNC stružnica
DMG GILDEMEISTERCTX alpha 500 V6

Pokliči

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, DMG Gildemeister CTX 500 Alpha V6 - Letnik izdelave: 2011 - Krmiljenje: Siemens 840D shop turn - Protipremer - z Y-osjo in C-osjo - Revolver: 12-pozicijski motoriziran VDI 30 Dodatna oprema: Hedpfeylkuuex Adkoni - Hidravlična vpenjalna glava - Transportni trak za odrezke - Naprava za hlajenje - Vmesnik za podajalnik palic - Lovilec obdelovancev s transportnim trakom

Poglej podrobnosti

Mali oglas

Industrijski roboti KUKA KR 210 R2700 prime

Göppingen

493 km

Industrijski roboti
KUKAKR 210 R2700 prime

Pokliči

Mali oglas

Industrijski roboti KUKA KR 240 R2900 ultra

Göppingen

493 km

Industrijski roboti
KUKAKR 240 R2900 ultra

Pokliči

Auction Conditions

The contractual language is German. The German version of these Auction Conditions shall prevail. The English version is for information purposes only.

Auction goods are sold on behalf of and for the account of the seller cooperating with Machineseeker Group GmbH.
All prices and bids are net prices and do not include VAT.
Stated dismantling and loading costs are binding.
All information is provided to the best of knowledge – Machineseeker Group GmbH generally recommends to inspect used machinery.
Bidding is reserved for commercial buyers – sale exclusively to commercial buyers.
The duration of an auction may be subject to change.
By placing a bid, the prospective buyer declares herself/himself to be knowledgeable and informed with regards to auction good(s).
Submitted direct or maximum bids are binding.
Machineseeker Group GmbH reserves the right to examine incoming bids. Bids can be rejected or cancelled without providing reasons.
The winning bid is designated at offer period end, conditional to the minimum price defined by the seller.
In case of acceptance of a bid, Machineseeker Group GmbH charges closing costs of 18 % net on the buyer’s net bid (unless stated differently in the listing).
The General Auction Terms of Machineseeker Group GmbH apply.