CNC stružno-rezkalni center

DMG MORI NLX2500SY/700

Stanje: rabljeno, Leto izdelave: 2014, Max. turning diameter: 366 mm Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Counter spindle nose: JIS A2-5 Counter spindle bearing diameter: 85 mm Counter spindle bore: 43 mm Ljdpfx Asu Hq Rlsh Uerl Max. usable bar diameter (counter spindle): (-) mm Chuck diameter (counter spindle): 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool interface: BMT 60 Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total connected load: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Stanje: rabljeno, Leto izdelave: 2016, številka stroja/vozila: 127300000073, skupna višina: 4.500 mm, skupna dolžina: 9.000 mm, skupna širina: 6.500 mm, skupna masa: 46.000 kg, DMG MORI DMU 210 P Universal Machining Center in heavy-duty duoBLOCK design for 5-axis positioning and simultaneous machining. The machine is equipped with a Heidenhain TNC 640 3D control system as well as a large machining area of X 2,100 mm / Y 2,100 mm / Z 1,250 mm. This machining center features a continuously positioning universal milling head with controlled B-axis and integrated motor spindle. The swivel range extends from the horizontal position up to a maximum of 250°. Additionally, the machine is fitted with an NC rotary table Ø 1,700 mm with direct path measuring system and 360° positioning. The permissible table load is approx. 8,000 kg. The SK50 motor spindle achieves speeds of 20 – 12,000 rpm, providing power outputs of 52 kW / 42 kW and a torque of up to 430 Nm. The tool magazine is a wheel magazine with 63 tool positions and a double gripper. Equipment includes, among others: ICS high-pressure coolant system 80 bar, frequency control, air blow through spindle center, Blum Laser NT Hybrid tool measuring system, M&H infrared touch probe, 3D quickSET extension package, ACC active chatter suppression, MPC Machine Protection Control, Application Tuning Cycle ATC, oil and emulsion mist extractor, full enclosure, chip conveyor, 4-color signal lamp, virtual axis for TNC640, RMS Relocation Machine Security, machine designed for installation in a pit (depth approx. 780 mm). Rapid traverse speeds up to 60,000 mm/min as well as rapid feeds up to 60 / 40 / 40 m/min. Machine from industrial use, featuring extensive equipment for demanding applications in tool, mold, and mechanical engineering. Control ON: 47,888 h - Operating hours: 21,228 h 5-axis machining: Yes Z-axis travel: 1,250 mm X-axis travel: 2,100 mm NC rotary table: Yes Dimensions (LxWxH) approx.: 9,000 x 6,500 x 4,500 mm Weight approx.: 46,000 kg Serial number: 12730000073 Y-axis travel: 2,100 mm Year of manufacture: 2016 Condition: Good Payment terms: 100% prepayment before collection Lodpfoyxmicjx Ah Uorl Delivery terms: Ex foundation Under power: Yes

Stanje: rabljeno, Leto izdelave: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm C-axis: 0.001° Lrsdpfxovy Ig Hj Ah Uel Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore (sub spindle): 43 mm C-axis (sub spindle): 0.001° X travel: 260 mm Z travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y-axis

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, obratovalne ure: 10.168 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL254120635, CNC stružnica Proizvajalec: DMG MORI Tip: NLX 2500 SY 700 z avtomatizacijo WH10 Leto izdelave: 2012 Premer struženja: 460 mm Lodpfx Aey Szwhsh Uerl Dolžina struženja: 795 mm Krmiljenje: MORI SEIKI M730 BM Premer nad prečnim suportom: 590/360 mm Premer vretena: 80 mm Pomiki X/Z: 260/795 mm Skupna priključna moč: 40 kVA Teža stroja pribl.: 6,4 t Potrebni prostor pribl.: 3.994 x 3.056 x 2.187 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 400 mm, merilno območje osi Y: 400 mm, merilno območje os Z: 200 mm, teža obdelovanca (maks.): 25 kg, trajanje garancije: 12 meseci, vhodna napetost: 230 V, leto zadnje generalne obnove: 2025, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, osvetlitev, Multisensor Coordinate Measuring Center in TOP Condition with Warranty and Guarantee - Comprehensive Services Included Continuously maintained Ledodyc Uaepfx Ah Uerl Hexagon Optiv 442 multisensor measuring machine equipped with camera, laser, and Renishaw probing system. · Measuring range (single sensor): 410 x 410 x 200 mm · Dimensions: 1232 x 910 x 1663 mm · Weight: approx. 940 kg · Max. load capacity (glass plate): 30 kg · Accuracies: U1 = 1.9 + L/200; U2 = 2.4 + L/150; U3 = 2.9 + L/100 (L = measuring length in mm) · Max. traverse speed per axis: 200 mm/s · Incl. camera with 2-step zoom · Incl. laser · Incl. LED ring light · Incl. Renishaw 6-position probe changer · Incl. Renishaw TP200 probing system · Incl. new frame grabber (Eagle) · Incl. dual-monitor operation · Incl. Windows 10 evaluation station · On request incl. transport, commissioning & calibration

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Lrodpfxoyxpv So Ah Uol Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Stanje: dober (rabljeno), Leto izdelave: 2017, obratovalne ure: 8.800 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: NL2561708843, število vreten: 2, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 max. Turning diameter mm: ø: 366 Swing diameter over bed mm: ø: 920 Swing diameter over cross slide mm: 740 Bar working capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool holder: BMT40 Max. driven tool speed rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/cont) Rapid traverse rate: 30 m/min Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% DC/50% DC/cont) Max. torque Nm: 49 Sub-Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25% DC/cont) Max. torque Nm: 22 Sub-spindle travel mm: 734 Cooling System Lrjdpjyzxcgsfx Ah Uol Tank capacity liters: 366 Equipment Chip conveyor Signal lamp Machine Operating Hours: Power-on hours: 19,393 Cutting time: 8,800 Rated power consumption kVA: 48 Base Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360 The tools shown, driven tools, and both chucks are not included in the scope of delivery.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.200 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.000 mm, širina mize: 1.000 mm, dolžina mize: 3.500 mm, ZAYER posteljna rezkalna stroj v dobrem delujočem stanju. Ljdpfxow Uha Ho Ah Uerl Specifikacije: hod X-osi 3200 mm hod Y-osi 1200 mm hod Z-osi 1000 mm vpenjanje rezkalne glave ISO 50 krmiljenje Heidenhain TNC410 dimenzija mize 3500x1000 mm leto izdelave 1999

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 705 mm, premer struženja: 366 mm, moč vretenovega motorja: 18 W, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, skupna masa: 8.360 kg, CNC Control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Max. turning length mm: 705 Turning diameter mm: ø 366 Swing over bed mm: ø 920 Swing over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool stations: 20 Tool interface: BMT40 Upper Turret Number of tool positions: 20 Max. RPM driven tools: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min / 5 min / continuous) Lrodpfoywtwwsx Ah Uel Rapid traverse rate m/min: 30 Main Spindle Max. spindle speed RPM: 4,000 Spindle drive power kW: 18.5/18.5/15 (25% duty cycle / 50% / continuous) Max. torque Nm: 49 Sub Spindle Max. spindle speed RPM: 5,000 Spindle drive power kW: 11/7.5 (25% duty cycle / continuous) Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment - Electronic handwheel - Chip conveyor - Signal light - High-pressure pump - Probe - Paper band filter Machine Hours Power-on hours: 23,501 Cutting time: 7,494 Rated power kVA: 48 Basic Machine: Dimensions / Weight Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 740 mm, premer struženja: 920 mm, moč vretenovega motorja: 18 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, dolžina vretena za rezkanje: 91 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, premer nihanja nad prečnim premičnikom: 740 mm, nos vretena: JIS A2-8, skupna masa: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Turning diameter over bed mm: ø 920 Turning diameter over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed of driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area lighting Dual foot switch for main and sub spindle Coolant gun Touch probe Paper band filter Preparation for robot integration Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220 mm x height 20 mm Max. weight per robot piece: 5.6 kg Machine operating time: Hours powered: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions/Weight Lrjdpjwkf H Defx Ah Ujl Length mm: 5,330 Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Steuerungssystem MXS 850 IV Technische Daten: - Max. Umlaufdurchmesser über Bett: 755 mm - Max. Umlaufdurchmesser über Support: 740 mm - Max. Drehdurchmesser: 366 mm - Drehlänge: 785 mm - Verfahrwege: - X-Achse: 260 mm - Y-Achse: 100 ±50 mm - Z-Achse: 795 mm - Eilgang X/Y/Z: 30/20/50 m/min - Spindelleistung: 26/22 kW - Spindeldrehzahl: 4.000 U/min - Stangendurchlass: 80 mm - Futterdurchmesser: 250 mm - Spindelaufnahme: JIS A2-8 - Spindelindexierung: 0,001° - Gegenspindel-Leistung: 11/7,5 kW - Gegenspindel-Drehzahl: 6.000 U/min - Stangendurchlass Gegenspindel: 80 mm Ljdpfsyilzhex Ah Uorl - Futterdurchmesser Gegenspindel: 150 mm - Gegenspindelaufnahme: JIS A2-5 - Gegenspindel-Indexierung: 0,001° - Anzahl Werkzeuge im Revolver/angetrieben: 12/12 Stück - Leistung angetriebene Werkzeuge: 5,5 kW - Drehzahl angetriebene Werkzeuge: 6.000 U/min - Maschinengewicht: 6.200 kg - Maschinenabmessungen LxBxH: 4,34 x 2,00 x 2,120 m Ausstattung: - Späneförderer - 3-Backenfutter Kitagawa BB-210 im Hauptspindel - Kitagawa B 206 im Gegenspindel - Werkstückfänger - Verschiedene Werkzeughalter - Schnittstellenanschluss für Stangenlader - Synchrongewindeschneiden - Maschine mit 17.800 Betriebsstunden.

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. bar diameter: 90 mm - Max. machinable diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Travel Y: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h ACCESSORIES - Control: CELOS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status lamp - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool measurement probe system - Parts catcher - Parts conveyor - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 Ljdpfx Asx H Atysh Uerl - Number of static tool holders: 10 - Collet chuck