CNC stružno-rezkalni center

DMG MORI NLX 2500/700

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, največja hitrost vretena: 4.000 obr/min, Ta DMG MORI NLX 2500Y 700 je bila izdelana leta 2022. Gre za robusten horizontalni stružni stroj, idealen za precizno obdelavo. Razmislite o priložnosti za nakup tega horizontalnega stružnega stroja DMG MORI NLX 2500Y 700. Za več informacij nas kontaktirajte. Itedpfoyalm Iox Af Tsb Prednosti stroja Kvalitativne prednosti stroja • 4-barvna luč • Avtomatska vrata • Vmesnik za robota • Vmesnik za podajalec palic • 10 m kode • Pihalnik Tehnične prednosti stroja • Dolžina struženja 705 mm • Y-os • Pogonska orodja (live tooling) • 12-postajni revolver z 10.000 min⁻¹ • Preklopni transporter odrezkov • Visokotlačno hlajenje • Ročno prednastavljanje • Samozapenjalna vpenjalna glava Kitagawa BR 10 • Vreteno ASA 8" z izvrtino 91 mm

Leto izdelave: 2002, Stanje: delavnici obnovljeno (rabljeno), Beam Cutting, Drilling and Marking Line CIRCULAR SAW Brand: KALTENBACH Model: HDM 1431 / T13 / SP-CNC Year: 2002 Serial No.: 122.400 Weight without accessories: 10,980 kg - Down-cut circular saw. - Saw unit with gear drive, drive system and saw blade mounted on a wear-resistant rotary bearing. Itedpfehzbipjx Af Teb - Heavy-duty saw gearbox with helical-toothed gears in oil bath, hardened and ground. - Hydraulically adjustable saw blade feed according to table, with very fast return. - Horizontal hydraulic clamping device. Rear clamping jaw with long-travel clamping cylinder and automatic return limit. - Vertical clamping block with self-adjusting pressure plate. - Miter cutting device to set angles from 45° left to 35° right. - Material sensor for automatic change from rapid feed to working feed. - Hydraulically liftable feed roller for optimal material transport on the saw table. - Economical lubrication via micro-dosing system, especially suitable for cutting profiles. - Chip collector installed on the machine table. Specifications: - Blade mounting: 100x4x30x250mm - Blade diameter: 1,430mm - Cutting width: 9.5mm - Cutting speed: 10 to 20 m/min. - Saw feed speed: 0-400mm/min. - Quick return speed: 2,000mm/min. - Total power: 25KW - Working height: 640mm Cutting capacities: 90º Cutting - Angle steel: 250mm - U-steel: 400mm - Double T-beam: 600mm - Wide flange beam: 1,008x302mm - Special flange beams: 1,000x450mm Miter Cutting: IPBv Beam - 75º: 1,008x302mm - 60º: 910x302mm - 45º: 716x304mm - 40º: 716x304mm - 35º: 478x307mm IPBs Beam - 75º: 1,008x402mm - 45º: 524x357mm IPE Beam - 45º: 600x220mm DRILLING UNIT Brand: Kaltenbach Model: KDX 1215 Serial No.: 122.401 Working capacities: - Angle steel (min - max): 80x65x10mm - 250x250x28mm - U-steel (min - max): 80x45mm - 400x110mm - Double T-beam (min - max): 80x46mm - 600x220mm - Wide flange beam (min - max): 100x100mm - 1,008x302mm - Extra wide flange beam: 1,200x500mm Drilling units: 3 - Vertical (Y Axis): 1 unit - Horizontal (Z and W Axes): 2 units Drilling diameters: 8 - 40mm RPM: 150 - 1,100 Rapid feed - Rapid return: 3,850mm/min. - 8,000mm/min. Drill spindle feed: 0-500mm/min. Spindle rapid positioning speed: 15,000mm/min. Automatic tool changer: 5 tools per drilling unit. 3x5 = 15 tools total Total power: 45KW MARKING UNIT FEEDING SYSTEM: 26 METERS INFEED WITH BEAM FEEDER + 6 SIDE ARMS FOR INFEEDING BEAMS PARALLEL TO ROLLER CONVEYORS 30 METERS OF ROLLER CONVEYORS FOR OUTPUT + 6 SIDE ARMS 4 SIDE ARMS FOR SMALL PARTS THE VAST MAJORITY OF ROLLERS ARE MOTORIZED The entire line occupies approximately 60 linear meters from input to output. *Installation drawings available on request.

Leto izdelave: 2012, obratovalne ure: 6.500 h, Stanje: pripravljen za uporabo (rabljen), Glavni pogon Število osi: 3 Mediji Transporter za ostružke: Da Dodatna oprema KITAGAWA votla vpenjalna naprava s KITAGAWA SS1881K21 za glavno vreteno Črpalka 15 bar s filtrom Hladilni sistem z zvišanim tlakom (5 bar) Transporter s členasto verigo, odvod v desno Integriran izmetnik delov za glavno vreteno Vmesnik za podajalnik palic, LNS Dvojno nožno stikalo z zaščitnim pokrovom Signalna luč (rdeča, rumena, zelena) Previse orodja 100 mm za pomik v Y-osi + komplet držal za orodja Transformator 45.000 VA Ta triosni DMG Mori Seiki NLX2500Y 700 je bil izdelan leta 2012. Opremljen je z votlo vpenjalno napravo KITAGAWA, izboljšanim hladilnim sistemom s 5 bar tlaka in integriranim izmetnikom delov. Dodatno vključuje transporter s členasto verigo, vmesnik za podajalnik palic in signalni svetlobni sistem. Idealen za stružno-rezkalne operacije – izkoristite priložnost za nakup tega horizontalnega stružnega centra DMG Mori Seiki NLX2500Y 700. Kontaktirajte nas za več informacij o tem stroju. Itedpfjx D D Uwsx Af Tob Vrste uporabe Struženje

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 3.751 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 700 mm, premer struženja: 356 mm, hitrost vretena (min.): 6.000 obr/min, izvrtina vretena: 81 mm, potovalna razdalja osi X: 260 mm, pomik osi Y: 100 mm, pomik po osi Z: 795 mm, DMG MORI NLX2500/700 univerzalni stružnica z Y-osjo, podajalnikom palic in gnanimi orodji. Glavna in kontra vretena. Premer izvrtine vretena: 81 mm. VKLJUČEN paket orodij (nakupna cena 64.000 € / glej prilogo). Itjdpfxox Sp Izo Af Tob

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, merilno območje os X: 500 mm, merilno območje osi Y: 700 mm, merilno območje os Z: 500 mm, trajanje garancije: 12 meseci, Oprema: dokumentacija / priročnik, DOSTAVA SAMO V ZDRUŽENO KRALJESTVO Global S Green 05.07.05 HH-AS6-T5, 5° avtomatska indeksirna glava HP-TM prožilna merilna glava Standardni komplet merilnih nastavkov Programska oprema za merjenje PC-DMIS Leto izdelave: 2019 Za alternativne konfiguracije nas prosimo kontaktirajte. Iedpfeu Snthsx Af Totb Merilno območje: X 500 mm, Y 700 mm, Z 500 mm MPE(E0/E150) (18 °C - 22 °C): 1,5 + L/333

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2011, obratovalne ure: 9.080 h, Funkcionalnost: popolnoma funkcionalen, For sale: Well-maintained CNC Turning and Milling Center DMG Mori Seiki NLX 2500 SY/700, year of manufacture 2011, equipped with Mitsubishi 730 BM control! Only approx. 9,000 operating hours! Travel Paths: X-axis: 260 mm Y-axis: 100 mm Z-axis: 795 mm Itsdpoxzqhrefx Af Teb Equipment and Accessories: - Turret: 12 positions, all driven - Driven tool speed: max. 10,000 rpm - Parts catcher - Power supply: 400 V - Power consumption: 37.6 KVA - Internal coolant system - Main spindle chuck: Kitagawa BB210AB - Sub spindle chuck: Kitagawa B206A521F - Turning diameter: 366 mm - Turning length: 705 mm - Hollow spindle: 80 mm - Main spindle max. speed: 4,000 rpm, with 3-jaw chuck - Power: 18.5 kW - Sub spindle max. speed: 6,000 rpm, with 3-jaw chuck - Chip conveyor - Tool measurement system in the working area - Manual measuring arm for sub spindle - Short bar loader, manufacturer: LNS - Includes tooling: 8 fixed tools, 3 driven tools - Incl. extraction unit, manufacturer: Indusa - Complete documentation included Machine available immediately! The machine has been fully cleaned and inspected! Loading handled by us! Transport can be organized upon request!

Stanje: rabljeno, TECHNICAL SPECIFICATIONS - Number of axes: 6 - Number of spindles: 2 - Number of turrets: 1 MAIN SPINDLE - Spindle nose: A2-8" - Spindle drive power: 18.5 kW - Spindle speed: 4,000 rpm - Max. bar diameter: 90 mm - Max. machinable diameter: 460 mm - Minimum C-axis resolution: 0.001° SUB SPINDLE - Spindle nose: A2-6" - Spindle drive power: 11 kW - Spindle speed: 6,000 rpm - Minimum C-axis resolution: 0.001° TURRET 1 - Number of positions: 12 - Number of driven positions: 12 - Travel X/Z: 260/795 mm - Travel Y: +/-50 mm - Tool type: BMT - Driven tool speed: 10,000 rpm - Driven tool power: 5.5 kW ELECTRICAL SUPPLY - Supply voltage: 400 V - Total power consumption: 41 kW MACHINE HOURS - Power-on hours: 21,392.8 h - Operating hours: 13,797 h ACCESSORIES - Control: CELOS - Interface: Ethernet / RS232 / USB / PCMCIA - Teach-in programming: MAPPS V - 3-color status lamp Iedpfx Asx H Atysf Tstb - Coolant tank: KNOLL * with high-pressure pump: 70 bar * with paper filter - Tailstock option with sub spindle - Chip conveyor - Tool measurement probe system - Parts catcher - Parts conveyor - Bar feeder: LNS QUICKLOAD - Electrical transformer - Number of driven tool holders: 2 - Number of static tool holders: 10 - Collet chuck

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, potovalna razdalja osi X: 2.600 mm, pomik osi Y: 700 mm, pomik po osi Z: 700 mm, hitro pomikanje X-os: 40.000 m/min, hitri pomik os Y: 40.000 m/min, hitri pomik na osi Z: 40.000 m/min, širina mize: 750 mm, dolžina mize: 2.900 mm, obremenitev mize: 2.150 kg, 5-Axis Machining Centre DMG MORI - DMF 260-7 X-axis travel: 2600 mm Y-axis travel: 700 mm Z-axis travel: 700 mm A-axis: 360000° B-axis: -110° to +110° Table length: 2900 mm Table width: 750 mm Table load capacity: 2150 kg Table diameter Ø: 750 mm Feed rate X-axis: 40,000 mm/min Feed rate Y-axis: 40,000 mm/min Feed rate Z-axis: 40,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 35 kW Spindle speed: 18,000 rpm Tool changer: 30 positions Internal coolant supply (IKZ): 20 bar Number of controlled axes: 5 Itjdpfxoxuqv Ae Af Tjb Chip conveyor: Yes Coolant system: Yes Length: 8,400 mm Width: 3,423 mm Height: 2,620 mm Weight: 16,000 kg Please note: The information on this page has been provided to the best of our knowledge and, wherever possible, obtained from the manufacturer. The information is given in good faith; however, accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend verifying all important details independently.

Stanje: rabljeno, Leto izdelave: 2017, Maximalni promjer obrade: 356 mm Dužina obrade: 705 mm Upravljačka jedinica: M730 UM Mapps CELOS Promjer obrtnog kruga iznad ležaja: 920 mm Promjer obrtnog kruga iznad ravne klizne staze: 742 mm Raspon broja obrtaja glavnog vretena: 4.000 min⁻¹ Pogonska snaga glavnog vretena: 18,5 / 15 kW Vretena glava: JIS A2-8 Provrt vretena: 80 (91) mm C-os: 0,001° Raspon broja obrtaja kontravretena: 6.000 min⁻¹ Pogonska snaga kontravretena: 11 / 7,5 kW Provrt kontravretena: 43 mm C-os: 0,001° X-putovanje: 260 mm Z-putovanje: 795 mm Y-os: ±50 mm Brzoposmična os (X / Y / Z): 30 / 10 / 30 m/min Broj pozicija za alat: 12 poz. Visina drške za četvrtasti alat: 25 mm Promjer drške bušilice: 50 mm Vrijeme izmjene pozicije revolvera: 0,27 s Raspon broja obrtaja pogonjenih alata: max. 10.000 min⁻¹ Pogonska snaga pogonjenih alata: 5,5 / 4,2 kW Ukupna priključna snaga: 41 kVA Isdpsxzk Ifsfx Af Tstb Težina stroja cca. 6,4 t Dimenzije: cca. 4,0 x 3,0 x 2,3 m CNC tokarilica i glodalica DMG MORI - NLX 2500 SY / 700 - Kontravreteno - Pogon alata - C, Y-osa - samo 1.237h rada vretena

Stanje: rabljeno, Leto izdelave: 2018, Maximum turning diameter: 356 mm Turning length: 705 mm Control: M730 UM Mapps CELOS Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Spindle speed range – main spindle: 4,000 rpm Drive power – main spindle: 18.5 / 15 kW Spindle nose: JIS A2-8 Spindle bore: 80 (91) mm Iedpfxsvy Ig Ho Af Tetb C-axis: 0.001° Spindle speed range – sub spindle: 6,000 rpm Drive power – sub spindle: 11 / 7.5 kW Spindle bore (sub spindle): 43 mm C-axis (sub spindle): 0.001° X travel: 260 mm Z travel: 795 mm Y-axis: +/- 50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Speed range – driven tools: max. 10,000 rpm Drive power – driven tools: 5.5 / 4.2 kW Total power requirement: 41 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI - NLX 2500 SY / 700 - Sub spindle - Driven tools - C, Y-axis

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) Iedpfew Ew T Ssx Af Tstb 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: rabljeno, Leto izdelave: 2014, Max. turning diameter: 366 mm Iedpju Hq Rljfx Af Tjtb Turning length: 705 mm Control: M 730 BM MAPPS IV Swing diameter over bed: 920 mm Swing diameter over cross slide: 742 mm Main spindle speed range: 4,000 rpm Main spindle drive power: 18.5 / 15 kW Spindle nose: JIS A-8 Spindle bearing diameter: 140 mm Spindle bore: 91 mm Max. usable bar diameter: 80 mm Chuck diameter: 250 mm Counter spindle speed range: 6,000 rpm Counter spindle drive power: 11 / 7.5 kW Counter spindle nose: JIS A2-5 Counter spindle bearing diameter: 85 mm Counter spindle bore: 43 mm Max. usable bar diameter (counter spindle): (-) mm Chuck diameter (counter spindle): 170 mm X-axis travel: 260 mm Z-axis travel: 795 mm Y-axis: +/-50 mm Rapid traverse (X / Y / Z): 30 / 10 / 30 m/min Number of tool stations: 12 positions Tool interface: BMT 60 Shank height for square tool: 25 mm Drill shank diameter: 50 mm Turret indexing time: 0.27 sec Driven tool speed range: max. 10,000 rpm Driven tool drive power: 5.5 / 3.7 kW Total connected load: 40 kVA Machine weight: approx. 6.4 t Space requirement: approx. 5.0 x 3.0 x 2.3 m CNC turning and milling center DMG MORI NLX 2500 SY / 700 - Main and counter spindle - C-axis - Y-axis - Driven tools

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 7024NL256160890J, največja hitrost vretena: 10.000 obr/min, pomik osi Y: 200 mm, največja hitrost vrtenja: 4.000 obr/min, Premer palice (maks.): 80 mm, razdalja med središči: 700 mm, Condition: Ball screw drives in X, Y, and Z axes replaced + major maintenance package 6 months ago (not in operation since then) TECHNICAL DETAILS Distance between centers: 700 mm Spindle speed: 1 - 4,000 rpm Power: 18.5 / 18.5 / 15 kW (25% duty cycle / 50% duty cycle / continuous) Bar capacity: Ø 80 mm Turret: 12 stations, bolt-on type Tool spindle: 10,000 rpm Tool spindle power: 5.5 / 5.3 / 7 kW (3 min / 5 min / continuous) Mount: MT5, live center Center sleeves without center Maximum projection of driven tools: ±100 mm Control: M730UM, CELOS - ERGOline Touch Assemblies: Integrated MK4 bearing for center Chip and coolant system Scraper belt chip conveyor: with magnetic separator, discharge height approx. 1,000 mm Coolant system: increased pressure 5 bar, pump 800 W, flow rate 20 l/min Itedpfxjxamqmo Af Tob Chuck coolant shower, incl. high-performance pump Compressed air purge for tool holders Compressed air purge for tailstock center Inline filter for coolant system EQUIPMENT - Interface for oil mist separator Ø 150 mm - Tool presetting device not included - Signal light (red, yellow, green, blue) - EtherNet/IP interface for automation - Robot interface for DMG Mori Seiki gantry robots - Transformer: 45 kVA, three-phase autotransformer - X-axis direction ISO - Machine is supplied without chuck

Stanje: dober (rabljeno), Leto izdelave: 2011, GILDEMEISTER CNC twin-spindle turning center Model: CTX beta 1250 4 A Machine No.: 00700000211 Year of manufacture: 2011 Control: CNC path control incl. 19” TFT Iedpfx Afewcxlws Totb Siemens Sinumerik 840 D sl solution line with ERGOline control and ShopTurn 3 G Power-on hours: 41,378 h Program run time: 24,814 h Technical data and equipment available on request

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 23.501 h, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 740 mm, premer struženja: 920 mm, moč vretenovega motorja: 18 W, največja hitrost vretena: 4.000 obr/min, potovalna razdalja osi X: 260 mm, pomik osi Y: 50 mm, pomik po osi Z: 795 mm, dolžina vretena za rezkanje: 91 mm, največja hitrost vrtenja: 10.000 obr/min, skupna višina: 2.395 mm, skupna dolžina: 5.330 mm, skupna širina: 4.100 mm, premer nihanja nad prečnim premičnikom: 740 mm, nos vretena: JIS A2-8, skupna masa: 8.360 kg, CNC control: Mitsubishi M730UM (CELOS - ERGOline Touch) Capabilities Travel X-axis mm: 260 Travel Y-axis mm: ±50 Travel Z-axis mm: 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Turning diameter over bed mm: ø 920 Turning diameter over cross slide mm: 740 Bar work capacity mm: 80 Tool Magazine Number of tool positions: 20 Tool holder: BMT40 Upper Turret Number of tool stations: 20 Max. speed of driven tools rpm: 10,000 Driven tool power kW: 5.5/4.9/4.2 (3 min/5 min/continuous) Y-axis travel mm: 100 Rapid traverse rate: 30 Main Spindle Max. spindle speed rpm: 4,000 Spindle drive power kW: 18.5/18.5/15 (25%ED/50%ED/continuous) Spindle bore mm: 91 Chuck type: Hollow chuck (Ø254 mm) BB210A821 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Max. torque Nm: 49 Sub Spindle Max. spindle speed rpm: 5,000 Spindle drive power kW: 11/7.5 (25%ED/continuous) Spindle bore mm: 73 Chuck type: Hollow chuck (Ø210 mm) BB208A621 Manufacturer: KITAGAWA Spindle nose: JIS A2-5 Max. torque Nm: 22 Sub spindle travel mm: 734 Cooling System Tank capacity liters: 366 Equipment Electronic handwheel Chip conveyor Signal lamp High-pressure pump Mist separator Work area lighting Dual foot switch for main and sub spindle Coolant gun Touch probe Paper band filter Preparation for robot integration Robot data - Fanuc - R-30iA / Type M-16iB/20 Availability of 10 pallets in the warehouse (10 slots) Clamping by robot: ø40 to 220 mm x height 20 mm Max. weight per robot piece: 5.6 kg Machine operating time: Hours powered: 23,501 Nominal power kVA: 48 Cutting time: 7,494 Base machine: Dimensions/Weight Length mm: 5,330 Itjdpfowkf H Dex Af Teb Width mm: 4,100 Height mm: 2,395 Weight kg: 8,360