Center za mlinarstvo Turn-Mill

DMG Mori Seiki NL2500SY/700

Stanje: rabljeno, Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, Used HAAS rotary table model HRT310, complete with HAAS drive unit and pneumatic HAAS tailstock. Kjdpowu Uahjfx Agkjdw

Stanje: dober (rabljeno), Leto izdelave: 1997, Technically in good condition and fully operational. Year of manufacture: 1997. Max. turning diameter: 250 mm. Max. diameter over bed: 530 mm. Max. turning length: 500 mm. Dimensions (L x W x H): approx. 3315 mm x 1895 mm x 1900 mm. Machine weight: approx. 6 tons. Kdsdpfx Agjwn Dbnskew

Stanje: novo, Leto izdelave: 2025, Spray-Flood Cleaning System – Parts Cleaning Machine Ksdpfx Agshu Sg Iskedw Washing (600 liters) + Rinsing (430 liters); electrically heated; The cleaning process can be performed via spraying, flooding (injection flood cleaning), and with ultrasonic support. The basket can remain stationary, oscillate, or rotate during the cleaning cycle (freely selectable via the program). Drying via hot air and vacuum drying. Basket usable dimensions (LxWxH): 600 x 400 x 300 mm Maximum load weight: 150 kg Loading table in front of the machine included Control: Siemens S7-1200 with 20 programs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, READY FOR IMMEDIATE USE! This degreasing system operates under vacuum using modified alcohol. Degreasing of metal components contaminated with oil and chips from mechanical processing. Usable solvents: modified alcohols Hydrocarbons class AIII (flash point > 55° C) Ultrasonic Weber 750W 40kHz Double loading table Double bag filter Oiling for corrosion protection (spraying) Cartridge filter Very good condition (the system has been used very little) 6 months warranty From Metalclean AG service System process: spraying, immersion, ultrasonic cleaning, vapor degreasing including vacuum drying. Data: Kjdpfxehg Ugio Agkjdw Basket dimensions: 480 x 320 x 200 h mm Maximum loading weight: 50 kg Average batches per hour: up to 5 System dimensions: 1600 x 1600 x 2400 mm (h) System weight: 2300 kg Electrical power requirement: 16 kW Energy consumption: 10 kW/h Solvent volume: approx. 250 liters

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2015, obratovalne ure: 14.717 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 800 mm, premer struženja: 500 mm, največja hitrost vretena: 12.000 obr/min, potovalna razdalja osi X: 480 mm, pomik osi Y: 100 mm, pomik po osi Z: 845 mm, največja hitrost vrtenja: 5.000 obr/min, vrsta vhodnega toka: trifazni, teža obdelovanca (maks.): 7 kg, skupna višina: 2.247 mm, skupna dolžina: 2.890 mm, skupna širina: 5.193 mm, skupna masa: 7.800 kg, CNC Control: Siemens 840D sl with CELOS ERGOline Capabilities: Travel X-axis (mm): 480 (–10) Travel Y-axis (mm): ±100 Travel Z-axis (mm): 845 Travel B-axis (mm): ±110° (0.001º) C-axis: 360º (0.001º) Turning length (mm): 800 Max. turning diameter (mm): ø: 500 Distance between spindle centers (mm): 1,020 TURNING-MILLING SPINDLE: Max. spindle speed (rpm): 12,000 Spindle drive power (kW): 22 / 19 Tool Magazine: Tool pockets: 24 Kdedpfx Ajxdlynjgkjw Tool holder: HSK-A63 Max. tool length (mm): 300 Max. tool diameter (mm): 125 Max. tool weight (kg): 7 Main Spindle: Max. spindle speed (rpm): 5,000 Spindle drive power (kW): 25 / 34 (100% / 40%) Spindle bore (mm): 67 Max. torque (Nm): 380 / 280 Counter Spindle: Max. spindle speed (rpm): 6,000 Spindle drive power (kW): 20 / 27 (100% / 40%) Spindle bore (mm): 52 Max. torque (Nm): 170 Counter spindle travel (mm): 800 Cooling System: Tank capacity (L): 600 High-pressure cooling (bar): 8 / 20 Equipment: Chip conveyor Blow-off air through the spindle center selectable via M-function Signal light Tool measuring arm Work area lighting Coolant gun Internal coolant supply Interface for bar loader Paper band filter Machine Running Time: Power-on hours: 36,049 Cutting time: 14,171 Basic Machine: Dimensions / Weight Length (mm): 2,890 Width (mm): 5,193 Height (mm): 2,247 Weight (kg): 7,800

Stanje: rabljeno, Description: Main Spindle: Technology: Belt-driven spindle with gearbox Speed: 1,000 rpm Power: 45 kW Torque: 4,008 Nm Bar capacity: 205 mm Workpiece clamping I: 3-jaw chuck, Autogrip AP-230 ø535 mm Workpiece clamping II: Manual 3-jaw chuck, Chandox SK20 (rear of spindle head) Tool Carrier (X/Y/Z): Technology: Turret with 12 stations Tool holder: BMT 75 Driven tool speed: 3,000 rpm, 7 kW, 83 Nm Travel X/Y/Z: 340/160/3,250 mm Rapid traverse X/Y/Z: 20/7/12 m/min Tailstock: Technology: Programmable quill drag-type tailstock Quill stroke: 150 mm Kdedpfxewt Iwqe Agkjw Taper: MT5 Equipment/Accessories: Chip management: Chip conveyor Coolant management: High-pressure coolant pump (IKZ) Tool measurement: Measuring arm, Renishaw RP3 Oil mist extraction: Mechanical separator, make AR Filtrazioni ARNO 3VF YF Shaft machining: Manual steady rest, ø150-300 mm Tool holders: Various static and driven holders Setup mode: Electronic handwheel Additional features: Automatic door (pneumatic), transformer, oil skimmer Further accessories: Various jaws and EWS quick-change inserts

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, TECHNICAL DETAILS: - CNC Control: MSX 803III - X Axis mm: 260 mm - Z Axis mm: 590 mm - Y Axis mm: +/- 50 mm - Maximum Turning Diameter mm: 356 - C Axis Increment: 0.001 - Maximum Turning Length: - Rapid Traverse Rate mm/min X, Z, Y: - Swing Over Bed mm: - Swing Over Cross Slide mm: - Bar Capacity mm: Ø 65 (main) - Max. Rapid Traverse m/min X, Z: - Main Spindle 12” - Spindle Speed rpm: 5,000 rpm - Spindle Power kW: 18.5 kW - Torque Nm: - Main Spindle Bore mm: - Main Spindle Nose: A2-6 - Sub-Spindle: - Sub-Spindle Speed rpm: 6,000 rpm - Sub-Spindle Power kW: 11 kW - Torque Nm: - Sub-Spindle Bore mm: - Sub-Spindle Nose: A2-5 - Turret Positions: 12 - Number of Driven Tool Stations: 12 - Driven Tool Speed rpm: 6,000 rpm - Driven Tool Power kW: 5.5 EQUIPMENT: - Chip conveyor - 3-colour status lamp - Fixed tool holders - Parts catcher Kodpfjwdrfgox Agksdw MACHINE DIMENSIONS: - Length: 2,705 mm - Width: 2,000 mm - Height: 2,120 mm - Weight: 5,800 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Control system: GE FANUC 21i-TB Swing diameter: 533 mm Kedpfxevw Uqas Agkodw Turning diameter: 340 mm Turning length: 355 mm X-axis travel: 209 mm Z-axis travel: 355 mm Spindle bore: Ø50.8 mm Spindle speed: 5,000 rpm Chuck max. Ø200 mm Turret: 12-station Rapid traverse: 30 m/min Drive power: 11 kW Spindle nose: A2-6 Tool holder: VDI30 C-axis: 0.001° (programmable) Dimensions (LxWxH): 2300 x 1700 x 1700 mm Weight: approx. 3,000 kg Equipment & Accessories: - Hydraulic chuck - Short bar loader EMT Super 80 - Manual Guide in FANUC software - Driven tool turret and C-axis - Tailstock - Parts catcher - Manuals Very good condition. The machine operates accurately.

Stanje: dober (rabljeno), Maks. premer: 560 mm Delovna dolžina: 3550 mm Kedpfx Aov Dvzyegkodw Maks. dolžina obdelovanca: 4000 mm

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, The HURON NU-4 is equipped with various buttons, switches, and levers to control its operation. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360° spindle taper: SK 40 Kdodpfxeriulgj Agksw spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 HP machine weight approx.: 3.1 t machine dimensions approx.: 2.36 x 1.65 x 1.45 m (W x H x D)