Orodni rezalnik

DECKEL FP3 Aktiv

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1989, Dear Sir or Madam, For sale is a partially overhauled Deckel FP1 with 3-axis TNC113 active control, which is particularly notable for its ease of operation. This newer model from 1989 features, among other things, central lubrication, an electric coolant pump, and a machine lamp. The machine has been extensively partially overhauled in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on site. As part of the partial overhaul, the following work was carried out, among others: - Spindle bearings in the milling head replaced - Repainted - Various standard parts such as handles, oil sight glasses, switches, etc. replaced - Worn parts such as drive belts replaced - Way covers partially replaced - Gib strips adjusted - And much more... Delivery time: immediate Year of manufacture: 1989 Machine No.: 2102-xxxx Table: rigid angle table Travel: X300mm / Y160mm / Z340mm Kedpfx Abepy Eldjhend Quill stroke: 60mm Connected load: 1.9kW Number of spindle speeds: 16 Speed range: 40–2,000 rpm Tool holder: SK40 Feed: stepless 5–500 mm/min Rapid traverse: 1,200 mm/min Features & accessories: coolant system, central lubrication, manual, machine feet Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and worn parts, if necessary, are replaced in advance - Upon request, we can completely or partially overhaul your chosen machine - Upon request, you can order additional accessories such as tools, etc., directly - Upon request, we can install additional accessories such as safety equipment - We are happy to arrange shipping and/or installation

Stanje: rabljeno, Leto izdelave: 2004, Hurco VM2 Very good condition! Table size: 1170 x 508 mm - Maximum table load: 544 kg - Travel in X/Y/Z: 1020 x 457 x 457 mm - Main spindle speed: 8000 rpm Knsdpfxevxlvvo Abhed - Main spindle taper: SK40 - Main drive power: 15 kW - Weight: approx. 4100 kg - Dimensions: 2500 x 2200 x 2590 mm

Stanje: dober (rabljeno), Offertă o mașină de frezat universală DECKEL FP1 aktiv, parțial recondiționată, cu afișaj digital Heidenhain pe 3 axe TNC 113 și masă rotativă divizor cu mandrină cu trei bacuri. Construcția compactă o face ideală pentru ateliere hobby mai mici sau garaje. Ksdpfx Asxmggujbhend Producător: DECKEL Tip: FP1 Nr. de serie: 2102-3314 - Cursă de lucru X/Y/Z: 300x160x340 mm - Turație arbore principal: 40–2000 rpm - Avans continuu pe toate cele trei axe - Avans rapid pe toate cele trei axe - Cap de frezat vertical - Reglare verticală 100 mm - Dispozitiv de frezare orizontală - Afișaj digital Heidenhain 3 axe TNC113 - Sistem de răcire - Masă rotativă divizor cu mandrină 3 bacuri Putere totală instalată: 1,9 kW Dimensiunile utilajului L x l x h: 1,30 x 1,10 x 1,60 m Greutate: aprox. 850 kg Prețul este net, ex works, încărcare inclusă. Stare: folosită.

Stanje: dober (rabljeno), Leto izdelave: 1981, Deckel FP3L Aktiv with 3-axis Heidenhain Aktiv digital readout, fixed table, vertical milling head, SK 40 spindle taper and S20x2 spindle mount. In good, operational condition. Can be demonstrated under power by prior arrangement. Knedjwg S Nkspfx Abhsd

Stanje: rabljeno, Universal tool milling machine MAHO type MH 800 P with digital display and HEIDENHAIN TNC 121 path control Serial no. 80983 Year of manufacture: 1982 Machine overhauled by MMD in 2008, subsequently rarely used in the workshop of an electronics company. Travels: X: 700 mm, Y: 450 mm, Z: 500 mm Table size: 1050 x 627 mm Spindle taper: ISO 40 Spindle speed: 40-2000 rpm, 18 steps Feed rate X, Z axis: 10-500 mm/min, stepless Feed rate Y axis: 5-250 mm/min, stepless Rapid traverse X, Z axis: 1.4 m/min Rapid traverse Y axis: 0.7 m/min Quill travel vertical: 100 mm Quill feed vertical: 0.02 / 0.03 / 0.05 / 0.08 / 0.12 / 0.2 mm/rev Quill travel horizontal: 100 mm Spindle drive: 5.5 kW Power supply: 380 Volt, 50 Hz, 10 kW - NC path control HEIDENHAIN TNC 121 Knsdpfxjv Amryj Abhjd - Vertical milling head with automatic quill feed 0.02 - 0.2 mm/rev (6 steps) - Hydro-mechanical tool clamping - Coolant system integrated in machine base - Universal rotary table, 360° rotatable, 30° swivel and tiltable, 225 mm cross travel - Rotary table with direct division 72 x 5° and indirect division via indexing disc 1:120 = 1 rev. = 3° - Swiveling operator panel - Central lubrication - Operating manual - Machine mounted on a steel plate L x W x H 1400 x 1000 x 50 mm = 550 kg Required floor space L x W x H 2650 x 2000 x 2450 mm Weight 3700 kg + 550 kg steel plate Total weight 4250 kg (measured) In very good condition

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP3 with New 3-Axis FPS Aktiv Digital Readout (Heidenhain) | General Overhaul by FPS 2015 | Like-New Condition Technical Data: • Year of manufacture: 1980 | Machine No. 2201-5045 • Fixed angle table • Spindle speed: 25 - 2,500 rpm Kodpfxou Dm E Hj Abhsnd • Infinitely variable feed rate on all 3 axes • Rapid traverse on all 3 axes • Motor power: 2.0 / 4.0 kW • Spindle brake • Travel (X/Y/Z): 500 / 300 / 400 mm • Vertical milling head movable on spindle head by 200 mm • Extendable vertical and horizontal quill – SK40 • Drawbar system M16 • Weight: approx. 1,500 kg Equipment and Accessories: • 3-axis Aktiv Digital Readout (Heidenhain, latest version) • Coolant system • Central lubrication system About the Machine: Offered is a Deckel FP3 universal milling machine in like-new condition. The FP3 was completely overhauled by FPS in 2015 and has seen little use since then. The machine has minimal backlash and all spindles move smoothly. This newer FP3 model features infinitely variable feed rate on all three axes, as well as rapid traverse for each axis. A major advantage is the Aktiv 3-axis digital readout. With the Heidenhain position control, you can enter target dimensions which the machine automatically travels to. An oil change has been performed. The machine has been mechanically and electrically inspected. The Heidenhain digital readout makes operation easier and even more precise. Take the opportunity to view and test the machine under power at our location. The machine is available immediately.

Leto izdelave: 1982, Stanje: generalkompletno obnovljen (rabljeno), Universal tool milling machine Brand: DECKEL Model: FP 3 Aktiv Year of manufacture: 1982 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2201-5539 with warranty Kedpfxspn Rgve Abhsnd Geometric inspection with test protocol Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 650 x 370 mm (T-slot: 12 mm) - Vertical milling head SK 40 with draw thread M16 - Central lubrication, manually operated - Coolant system - Operating manual Used, as seen The machine corresponds technically to the standard of its year of manufacture.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1989, obratovalne ure: 3.304 h, številka stroja/vozila: 592, Article number: MA1168 Manufacturer: Rössler Model: R300 A/SM Year of manufacture: 1982 Machine no.: 592 Control system: Rössler Ksdpori S Hyefx Abhjnd Weight [kg]: 1500 Connected load: 380 V Operating hours [h]: 3304 Equipment: Abrasives, circuit diagrams Accessories: The unit is in very good condition and fully operational

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 LV Aktiv Year of manufacture: 1988 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2309-0146 Milling head type: 2271 Milling head no.: 700-0887 Warranty: 12 months, single-shift operation from delivery date, covering the mechanics overhauled by us. Electrical and electronic components are excluded, as they have only undergone a functional test. For machines located outside our North Bavarian sales territory, travel expenses are to be borne by the customer. Geometric inspection with test report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 Knjdetdnb Eopfx Abhed - Fixed table 1,390 x 550 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbolt thread M 16 - Central lubrication, manual - Coolant system - Operating instructions Used, sold as seen. The machine is technically in accordance with the standard from the year of manufacture.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1988, Universal Tool Milling Machine Make: DECKEL Model: FP 3 L Aktiv Year of manufacture: unknown – overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey RAL5008 grey-blue Machine no.: 2302-2319 Milling head type: 2271 Milling head no.: 700-0883 with warranty Geometric acceptance with inspection protocol Knedjh Rv U Espfx Abhod Accessories: - 3-axis active digital readout HEIDENHAIN TNC 111 - Universal table 1000 x 520 mm (T-slot: 16 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 - Central lubrication, electric - Coolant device - Operating manual - Drill bit grinding attachment with diamond wheel - used, as seen -

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Deckel FP3 universal milling machine with 3-axis Heidenhain digital readout. The machine is in very good condition and comes from a state training workshop. Features: fixed table, SK 40 spindle taper. Included accessories: various collets and arbor mandrels, counterstay. The machine is in very good, ready-to-use condition, and can be demonstrated under power by prior arrangement. Kedev U Rh Nspfx Abhond