Orodni rezalnik

DECKEL FP2

Stanje: zelo dobro (rabljeno), Leto izdelave: 1979, Funkcionalnost: popolnoma funkcionalen, Universal Milling Machine Deckel FP2 with 3-Axis Active TNC 111 Heidenhain Digital Readout and Accessories – Excellent Condition Technical Data: Hjdpjy H Ibcjfx Agxsl >> Year of manufacture: 1979 >> Machine no.: 2202-10512 >> Fixed angle table >> Spindle speed: 25 - 2500 rpm >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Motor power: 2.2 kW >> Spindle brake >> Travel (X/Y/Z): 400/220/400 mm >> Vertical milling head on spindle carrier adjustable by 150 mm >> Vertical and horizontal quill - ISO 40 (SK40) extendable >> Drawbar system: M16 >> Weight approx. 1400 kg Equipment and Accessories: >> 3-axis TNC 111 Active Digital Readout Heidenhain >> Coolant system >> Central lubrication >> 1 accessory cabinet including: Collets, tool holders, clamping tools, steady rest, indexing head with 3-jaw chuck, machine vice, steady rest, dividing plates, and much more About the machine: Offered here is a Deckel FP2 universal milling machine in excellent condition. The FP2 comes from a government laboratory where it saw very little use. It includes an accessory cabinet with comprehensive tooling. The machine has very little backlash, and all the axes move smoothly. The geometry is outstanding. Even at maximum speeds, the milling machine operates smoothly. With this newer FP2 model, the feed can be steplessly controlled in all three axes, and each axis also has a rapid traverse. A major advantage is the active 3-axis digital readout. With this Heidenhain control system, you can enter dimensions which the machine will automatically position to. An oil change has been performed. Mechanically and electrically tested. The Heidenhain digital readout makes operation easier and even more precise. Take advantage of the opportunity to inspect and test this machine under power on site.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1984, Univerzalni orodjarski rezkalni stroj DECKEL FP 3 S troosnim aktivnim digitalnim prikazovalnikom Heidenhain TNC 11 Leto izdelave: 1984 Pomik: X 500 Y 300 Z 400 mm Območje obratov: 25 – 2500 min⁻¹ Z naslednjo opremo: Toga kotna miza 850 mm x 400 mm vpenjalna površina Zasukalna vrtljiva miza Ø 450 mm z delilnimi ploščami Stružna glava Premična navpična rezkalna glava Izvlečna vrtalna puša Brezstopenjski podajalnik preko potenciometra Različni rezkalni trni SK 40 / S22 x 2 Kad za ostružke Centralna mazalna črpalka (avtomatska) za osi X, Y, Z Strojna luč Hjdpfxexuh Rds Agxjl Hladilna naprava 4 kosi strojnih nog Navodila za uporabo

Stanje: dober (rabljeno), Leto izdelave: 1962, Spindle mount, vertical + horizontal SK / ISO 40 Table clamping surface 700 x 285 mm Travel X-axis 500 mm Hsdjm Uygvjpfx Agxjl Y-axis 200 + approx. 250 mm Z-axis 400 mm Quill stroke approx. 80 mm 18 main spindle speeds 40 - 2000 rpm 18 feed rates 8 - 400 mm/min Rapid traverse 1200 mm/min Drive power 2.2 kW Dimensions (L x W x H) 1150 x 1050 x 1650 mm Machine weight 1000 kg Accessories / Special features: • Vertical milling head, swiveling R/L • Fixed angle clamping table • Feed + rapid traverse on all axes Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Stanje: pripravljen za uporabo (rabljen), Orodjarska rezkalna stroj / DECKEL FP 2 s 3-osnim Heidenhain digitalnim prikazovalnikom ND 780 - Pomiki X/Y/Z: 450x230x400 mm - Avtomatski pomiki / hitri pomiki na vseh 3 oseh - 3-osni digitalni prikazovalnik Heidenhain ND 780 - Območje vrtljajev: 40-2000 min⁻¹ - Univerzalna nagibno/vrtilna miza - Horizontalna/vertikalna rezkalna enota z navpično pomično glavo - Vpenjalo za orodje ISO 40 - Hladilni sistem - Kad za ostružke - Različni nosilci orodij in vpenjalne puše - Dokumentacija Hodpfx Ajy Ipgiogxol Mere: DxŠxV 1,5x1,7x1,8 metra / Teža 1600 kg Pridržujemo si pravico do napak in tipkarskih napak

Stanje: zelo dobro (rabljeno), Deckel FP1 AKTIV (3-Axis Aktiv) Machine No.: 2102-3240 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 - S20x2 Spindle speed: 40-2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment/Accessories: - Heidenhain 3-axis Aktiv digital display, Type TNC 113 - Infinitely variable feed on X, Y and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head tiltable and extendable 100 mm horizontally - Coolant system (coolant tank in machine base) - Documentation - Centralized lubrication - Machine vise - Various tool holders/collets/tools Required installation space (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos showing the geometry can be provided upon request. Backlash Y-axis: 0.1mm Backlash X-axis: 0.2mm Backlash Z-axis: 0.15mm Runout horizontal spindle: 0.001mm Runout vertical spindle: 0.001mm Hsdpoyll A Tefx Agxsl Deviation parallelism Y-axis: 0.002mm (measuring length 150mm) Deviation parallelism X-axis: 0.01mm (measuring length 300mm) Videos demonstrating the geometry measurement can be provided upon request. The following parts have been renewed: - Gears in the horizontal head replaced and gear shaft newly mounted - New guide cover Z-axis + various add-on parts - Machine reconditioned - New LEDs installed - Y-axis chain tensioner overhauled - Reference point programming checked - Function test carried out

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Universal milling machine with 3D control, manual handwheels, and a universal table adjustable in three axes. Control system: Deckel Dialog Control 4: - 3D path control, including drilling and milling cycles - Monitor, electric hand-held control panel - Terminal for program input and output Technical data: Travel range X/Y/Z: 300 x 220 x 400 mm Speed: 31.5 – 3,150 rpm with 21 gear steps Feed rate: 4–2,000 mm/min Rapid traverse: 4 m/min Drive power: 1.6–2.0 kW Tool holder: SK 40 Hydraulic tool clamping Universal milling table with digital readout: - Clamping surface: 600 mm x 320 mm - Table load: 180 kg - C-axis rotation: 360° - A-axis tilt: 15°/45° - B-axis swivel: +/- 45° Vertical milling head: - Quill travel by hand – horizontal 65 mm, vertical 60 mm Additional equipment: Hodjwid Spepfx Agxol - Manual machine handwheels with scale - Direct travel measurement of NC axes - Coolant system Special accessories: - Approx. 33 tool holders (without tools) – see photo - High-speed milling spindle Machine data: - Machine weight approx. 1,380 kg - Required space incl. ancillary components: L approx. 2,940 mm, W approx. 1,900 mm, H approx. 1,960 mm - Power connection: 380 V, 50 Hz, 12 kVA The machine is in good, fully functional condition. It can be inspected under power and cutting operation by appointment.

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Dear Sir or Madam, We are offering for sale a Deckel FP2 Aktiv milling machine. This newer version impresses particularly with its infinitely variable spindle speed control featuring a Heidenhain Aktiv controller, which makes operation both extremely straightforward and highly convenient. The machine has undergone an extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect the machine on-site. Delivery time: on request Machine no.: 2202-xxxx Table: fixed angle table or rotary/swivel/tilting table Travel paths: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed adjustment on all 3 axes, Heidenhain digital display with Aktiv controller, coolant system, central lubrication, technical documentation, leveling feet, safety devices (optional) Hsdpfx Agjx Hr Dzoxol Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - Upon request, we can provide a complete or partial overhaul of the selected machine - Upon request, you can order additional accessories such as tools, etc. - Upon request, we can install further equipment, such as safety devices, directly for you - We are happy to arrange shipping and/or installation services

Stanje: delavnici obnovljeno (rabljeno), Please read the technical specifications thoroughly. If the machine is under consideration as an investment for you, we kindly ask that you provide your full identification, including a correct telephone number and email address, in order to receive a quotation. Deckel FP1 AKTIV (3-axis Active) Machine no.: 2102-5745 Year of manufacture: approx. 1988 Travel distances: X: 300 mm Y: 150 mm Z: 330 mm Table size: 600 x 210 mm Spindle taper: SK 40 – S20x2 Spindle speed: 40–2000 rpm Motor power: 1.6 and 2 kW Power supply: 380 Volt, 50 Hz Equipment: - 3-axis active digital display HEIDENHAIN type TNC 113 - Infinitely variable feed on X, Y, and Z axes - Quill travel on vertical milling head: 60 mm - Vertical milling head swivels and extends horizontally by 100 mm - Coolant system (coolant tank in machine base) - Documentation - Centralised lubrication Footprint (L x W x H): 1350 x 1100 x 1700 mm Weight: 850 kg The machine has been cosmetically refurbished and technically inspected. Videos demonstrating the geometry can be provided upon request. Backlash Y axis: 0.15 mm Backlash X axis: 0.3 mm Backlash Z axis: 0.2 mm Runout horizontal spindle: 0.002 mm Runout vertical spindle: 0.002 mm Parallelism deviation Y axis: 0.002 mm (measured over 150 mm) Parallelism deviation X axis: 0.002 mm (measured over 300 mm) The following parts have been renewed: Hsdpfx Agsxpwfgexjl - Central lubrication checked - Heidenhain digital display overhauled - Set of wipers installed - LEDs in active display replaced - Oil change - Vertical milling head newly fitted with bearings - Oil sight glass replaced Price: net, ex works, loaded from stock

Stanje: delavnici obnovljeno (rabljeno), Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 400 mm, pomik osi Y: 220 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 2.500 obr/min, hitrost vretena (min.): 25 obr/min, leto zadnje generalne obnove: 2026, Oprema: dokumentacija / priročnik, Dear Sir or Madam, For sale is a partially overhauled Deckel FP2. This later model stands out especially due to its stepless speed control, making operation very easy and extremely comfortable at the same time. The machine underwent extensive partial overhaul in our workshop and is therefore in excellent condition. You are welcome to inspect it on site to see for yourself. Hsdpfxoy Exays Agxjl --- 3 units currently available immediately! --- Availability: 3x Immediately Machine No.: 2202-xxxx Table: Fixed angle table or swiveling rotary-tilt table Travel: X 400 mm / Y 220 mm / Z 400 mm Drive power: 3 kW Number of spindle speeds: 16 Speed range: 25–2,500 rpm Tool holder: SK40 Drawbar system: S20x2 Feed: Stepless Equipment and accessories: 3-axis Heidenhain digital readout, stepless feed regulation on all 3 axes, coolant system, central lubrication, technical documentation, leveling pads, safety devices (optional) Our service promise to you: - We are a certified master workshop specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced beforehand - Upon request, we can completely or partially overhaul the selected machine - Upon request, you can order additional accessories such as tools, etc. directly - Upon request, we can install further equipment such as safety devices, etc. for you - We are happy to organize shipping and/or on-site delivery for you

Stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: 46436, Pomiki: Vzdolž: 400 mm Vertikalno: 400 mm Horizontalno: 200 mm Oprema: - Pomikljiva navpična rezkalna glava - Zasukalna kotna miza 260 x 600 mm - Različni nosilci za orodje Hodpfx Asygia Eogxjl - Montažni elementi - Rotacijska miza Ø 280 mm - Dokumentacija Stanje: preverjeno v delavnici

Stanje: rabljeno, Motor power 3 kW Total power requirement 3 kW Weight 1,400 kg O F F E R We can offer you from stock, subject to prior sale and errors: DECKEL Universal Tool Milling Machine with FAGOR 3-axis Digital Readout Type FP 3 Year Serial No. Table travel: longitudinal, motorized / manual 490 / 500 mm vertical, motorized / manual 370 / 380 mm Transverse milling slide travel, motorized / manual 290 / 300 mm Hsdpfx Agjv Nq Sksxjl Fixed angle table 2230 420 x 800 mm Installation height under spindle 90 - 470 mm Spindle taper SK 40 18 spindle speeds 40 – 2,000 rpm 18 feed rates 10 – 500 mm/min Rapid traverse 1,500 mm/min Spindle drive motor 3 kW Total drive 3 kW - 380 V - 50 Hz Weight 1,400 kg Accessories / Special features • FAGOR 3-axis digital readout V 300 (glass scales) with advanced functions such as chain dimensions, absolute dimension, mm/inch switching, etc. • Movable DECKEL universal vertical milling head, tiltable +/- 90° • Original DECKEL tool cabinet with extensive accessories such as various tool holders, collet chuck with approx. 20 collets, long arbor, various spacer rings, driving dogs, clamping devices, operating tools, etc. • DECKEL large, fixed angle table, 420 x 800 mm, mounted • DECKEL universal dividing head with direct and indirect indexing, various index plates • Additional manual DECKEL universal rotary table ? 380 mm with direct and indirect indexing, various index plates • Coolant equipment, chip tray, central lubrication, separate control cabinet, operating manuals Condition: Very well-maintained condition! Ideal machine for training workshops or small batch production! Please click here for a video of the machine: FP3/4 Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice We always have a wide selection of conventional and CNC milling machines in stock. Please contact us!

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9585, DECKEL Univerzalni rezkalni in vrtalni stroj Tip: FP 2 Št. stroja: 9585 Hsdpjygicajfx Agxol Leto izdelave: 1978/79 Stanje: dobro, pripravljen za uporabo Pomiki: -po dolžini: 400 mm -vertikalno: 400 mm -horizontalno: 200 mm

Stanje: rabljeno, Leto izdelave: 1989, x-hod 300 mm y-hod 300 mm z-hod 400 mm CNC krmiljenje DIALOG 11 Vpenjanje vretena ISO 40 Hitrosti vretena 31 - 5.000 min⁻¹ Velikost mize 620 x 390 mm Hjdpfxex Ndbqe Agxel Obremenitev mize 250 kg Pogonska moč 5,5 kW Brezstopenjski podajalniki 2 - 6.000 mm/min Hod pinole 80 mm Obratovalna napetost 380 V Skupna potrebna moč 11,0 kVA Teža stroja pribl. 1,65 t Prostorske zahteve pribl. 1,85 x 1,90 x 1,80 m Električna omara 1,35 x 0,70 x 1,70 m - Tovarniška št.: 2836-0283 - Krmiljenje: DIALOG 11 - Električno ročno kolo - Horizontalno rezkalno vreteno - Naprava za hlajenje

Stanje: zelo dobro (rabljeno), x-hod 450 mm y-hod 175 mm z-hod 400 mm Hitrost vretena 60 - 2800 obr/min Hsdpsvwgn Djfx Agxel Nosilec orodja ISO SK-30 Teža stroja pribl. 1 t Mere pribl. 1,1 x 1 x 1,5 m Rezkalni stroj je v zelo dobrem, vzdrževanem stanju.

Stanje: rabljeno, X-hod 400 mm Y-hod 200 mm Z-hod 400 mm Število obratov 40 - 2.000 vrt/min Vpenjalni stožec SK 40 Hodpfxoyyqpve Agxel Po naši oceni je stroj v dobrem rabljenem stanju in ga je možno po predhodnem dogovoru ogledati pod napetostjo. Pribor, prikazana orodja in vpenjala so priložena samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter vmesne prodaje!