Univerzalni obdelovalni center

Deckel Maho DMU 50 eVolution

Stanje: dober (rabljeno), Leto izdelave: 2001, MACHINE SPECIFICATIONS Iedpfx Agjxq Hb Tepea Control System: HEIDENHAIN Machining Area: X-axis travel: 500 mm Y-axis travel: 420 mm Z-axis travel: 380 mm Main Drive: Spindle speed range: 20 – 18,000 rpm Power (40/100% duty cycle): 35/25 kW Torque (40/100% duty cycle): 130/87 Nm Feeds: Working feed (X/Y/Z): 20 – 20,000 mm/min Rapid traverse (X/Y/Z): 50 m/min Work Table (B+C Axes): Table dimensions: Ø 500 x 380 mm Maximum table load: 200 kg T-slots (Number / Size / Tolerance): 7 / 14 mm / H7 C-axis travel: 360° (resolution 0.001°) B-axis travel: 180° (resolution 0.001°) Machine: Machine dimensions (LxWxH): 2,683 x 5,353 x 2,470 mm Machine weight: 5,020 kg Taper: Taper type: SK 40 (DIN 69871 A) Electrical Connection: Phases | Frequency | Voltage | Power: 3N | PE~50-60Hz | 400/230V | 40 kW Accessories: Through-spindle coolant Automatic tool changer: ATC-32 - Max. tool weight / Max. tool diameter: 6 kg / 200 mm Chip conveyor Electronic handwheel: HR-410 High-capacity cooling system: Interlit SUK-200-900 Equipped with Renishaw probe interface: probe included

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, Splošni podatki Mere širina: 3000 mm Mere globina: 2300 mm Iedpfxow S N Ige Agpea Mere višina: 2700 mm Teža stroja: 9600 kg Krmilna enota Znamka: HEIDENHAIN Model: TNC 640 Glavni pogon Število vreten: 1 Območje vrtljajev vretena: 20.000 min⁻¹ Oznaka vretena (konus): SK40 Število osi: 5 Pomiki Pomik po osi X: 600 mm Pomik po osi Y: 500 mm Pomik po osi Z: 500 mm Mediji Odvajač ostružkov: Da Dodatna oprema Odvajač ostružkov, hladilni sistem, verižni zalogovnik orodij, notranji dovod hladilne tekočine, razširjeno izpiranje ostružkov, rotirajoče kontrolno okno, separator meglice, zračni puhalnik, optična merilna tipala, kontrola loma orodja, pralna pištola, 3D nadzor, NC-sučno rotacijska miza, priprava za rokovalni sistem, signalna luč, elektronski ročni kolesček, zaslon. Prodaja dodatne opreme: 48x aluminijaste vpenjalne plošče (lastna izdelava); 48x vpenjal HHSG5 podjetja Ceratizit (WNT), 5x police (lastna izdelava), orodja in nosilci. Ta 5-osni DMG MORI DMU 60 EVO je bil proizveden leta 2016. Opremljen je z upravljanjem Heidenhain iTNC 640, vretenom z 20.000 vrt/min in 120-namenskim menjalcem orodja. Stroj vključuje odvajač ostružkov, hladilni sistem ter notranji dovod hladilne tekočine s tlakom 40 barov. DMU 60 EVO je odlična rešitev za kompleksne obdelave in robustna pridobitev za vsako delavnico. Za dodatne informacije o tem vertikalnem obdelovalnem centru nas kontaktirajte. Področja uporabe Frezanje

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 66.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 420 mm, pomik po osi Z: 380 mm, obremenitev mize: 200 kg, skupna masa: 6.500 kg, največja hitrost vretena: 18.000 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, For sale: CNC milling machine Deckel Maho, model DMU 50 eVolution The machine is in good condition and fully operational. History: 2022 – Spindle newly balanced New rotary union and gear ring Geometry newly adjusted Technical Data: Year of manufacture: 2004 Control: Sinumerik 840 D Powerline X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm B-axis: 0–180° C-axis: 360° Power-on hours: 66,000 h Operating hours: 31,000 h Table dimensions: Ø 500 mm Max. table load: 200 kg Max. spindle speed: 18,000 rpm Spindle taper: SK 40 Rapid traverse X/Y/Z: max. 50 m/min Tool magazine: 60 positions Space requirements: 4,700 x 5,400 x 2,600 mm Weight: approx. 6,500 kg Special equipment: IKZ (internal coolant supply) system Band filter system Iodswvuzzopfx Agpea Chip conveyor Right-side automation flap Digital 3D measuring probe Blum laser measurement system Transport and loading can be organised Europe-wide on request and for an additional charge. Prices excluding VAT. Inspection possible by appointment. Please contact us—our team will be happy to assist you! Trade-in or exchange possible! Machinery Purchase / Sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you wish to sell your machine? For more information or ways to contact us, please visit our website.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Krmilna enota Znamka: HEIDENHAIN Iodpfx Aswuwr Hegpea Glavni pogon Število osi: 5 Ta 5-osni vertikalni obdelovalni center DECKEL MAHO DMU 50 eVolution je bil izdelan leta 2002. Primeren je za zahtevna obdelovalna dela, saj zagotavlja natančnost in vsestranskost na kompaktnem tlorisu. Izkoristite priložnost za nakup vertikalnega obdelovalnega centra DECKEL MAHO DMU 50 eVolution. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Available directly from toolmaking department Iedet I Di Aspfx Agpoa Vertical Machining Center Make: DMG Model: DMC 104 V Linear Year of manufacture: 2003 CNC: Siemens 810 D Powerline Spindle hours: 18,200 (as of July 2024) Table size: 1250 x 600 mm Travel X-axis: 1000 mm Travel Y-axis: 600 mm Travel Z-axis: 500 mm Tool holder: SK 40 Spindle speeds: 1 - 12,000 rpm Drive power: 13/19 kW at 100/40% duty cycle Tool changer: 30 stations Equipment: • Linear drive in X-axis • Bed flushing • Spiral chip conveyor • Direct position measuring system • Drill breakage control via laser • Z-axis temperature compensation via sensor incl. active cooling unit • Internal coolant supply through the spindle • External air blast via 2 pipes • Coolant system 700 liters, paper band filtration system with high-pressure unit 40 bar • Visiport viewing window on operator door • Additional machine door on left side • Bader cooling unit on control cabinet • Prepared for connection of a 4th axis with Siemens 1FT 6064.1AF71-4AG1 drive motor and indirect measuring system with seal air 0.5 bar

Stanje: dober (rabljeno), Leto izdelave: 2000, Hello, I am offering for sale a 5-axis CNC Milling Center DECKEL MAHO DMU 50 V evolution. The machine is connected and in operation. _ Type: 5-Axis Milling Center Manufacturer: DMG DECKEL MAHO Model: DMU 50 V evolution Control: HEIDENHAIN TNC430 Iedott Ntfepfx Agpea Country of manufacture: Germany Year of manufacture: 2000 _ Machine Specifications: – Number of axes: 5 – Table size (length x width): 500 x 380 mm – Max spindle speed: 18,000 rpm – Spindle power: 15 kW – X/Y/Z axis travel: 500/420/380 mm – C/B axis rotation: 180/360 degrees – Max feed rate: 20 m/min – Total power consumption: 40 kVa – Machine dimensions (L x W x H): 2800 x 2300 x 2600 mm – Total weight: 6000 kg

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 53.776 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 400 mm, pomik po osi Z: 380 mm, premer vrtljive mize: 500 mm, največja hitrost vrtenja: 18.000 obr/min, For sale is a 5-axis simultaneous milling machine from Deckel Maho, model DMU 50 eVolution. The machine is in good condition and ready for immediate use. Technical specifications: Year of manufacture: 2000 Control: MillPlus Operating hours: 53,776 h Spindle hours: 18,512 h Ijdowxd Agjpfx Agpea X-axis: 500 mm Y-axis: 400 mm Z-axis: 380 mm B-axis: 0-180° C-axis: 360° Clamping table diameter: Ø 500 mm Max. table load: 200 kg Spindle taper: SK40 Max. speed: 18,000 rpm Spindle power: approx. 15 kW Tool magazine: 60 positions Dimensions: approx. 3,400 x 2,400 x 2,500 mm Weight: 5,500 kg Transport and loading can be organized throughout Europe at an additional cost, if required. Prices are plus VAT. Viewing by appointment possible. Please contact us, our team will be happy to assist you. Trade-in or exchange possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production facility? Or would you like to sell your machine? For further information or contact options, please visit our website.

Stanje: rabljeno, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 300 mm, premer struženja nad prečnim suportom: 20 mm, premer struženja: 20 mm, hitrost vretena (min.): 10.000 obr/min, največja hitrost vretena: 10.000 obr/min, izvrtina vretena: 20 mm, največja hitrost vrtenja: 10.000 obr/min, moč: 30 kW (40,79 KM), Centrum tokarsko-frezarskie kompletne z podajnikiem prętów LNS HYDROBAR MINI SPRINT (maksymalna długość pręta 3 000 mm) DMG MORI SPRINT 20-8 Sterowanie: Fanuc 310i Wrzeciono główne - prędkość: 10 000 obr./min - moc: 5,5 kW - moment obrotowy: 14 Nm Ijdeq Nmm Eepfx Agpsa - przelot pręta: maks. 20 mm - oś C1: 0,001° - przesuw osi Z1: 80 mm Wrzeciono przeciwbieżne - prędkość: 10 000 obr./min - moc: 5,5 kW - moment obrotowy: 14 Nm - oś C2: 0,001° - przesuw osi X2 / Z2: 240 / 300 mm - szybki przesuw w osi X2 / Z2: 40 m/min Nośnik narzędzi I (X/Y) - technologia: prowadnica liniowa - obróbka wewnętrzna: 6 stanowisk - uchwyt narzędzia: 20 mm - obróbka zewnętrzna: 6 stanowisk - uchwyt narzędzia: 12 x 12 mm - stanowiska narzędzi napędzanych: 5 - napęd narzędzi: 3 450 / 6 000 obr./min - uchwyt narzędzi: tuleja zaciskowa ESX 16 - przesuw w osi X/Y: 50 / 350 mm - szybki przesuw w osi X/Y: 40 / 30 m/min Nośnik narzędzi II (Y) - technologia: prowadnica liniowa - obróbka wewnętrzna: 4 stanowiska - uchwyt narzędzia: 20 mm - obróbka zewnętrzna: 4 stanowiska - uchwyt narzędzia: 12 x 12 mm - stanowiska narzędzi napędzanych: 5 - napęd narzędzi: 3 450 / 6 000 obr./min - uchwyt narzędzi: tuleja zaciskowa ESX 16 - przesuw w osi Y2: 120 mm - szybki przesuw w osi Y2: 40 m/min DANE MASZYNY - masa: 4 200 kg - pobór mocy: 30 kVA - napięcie zasilania: 400 V / 50 Hz WYPOSAŻENIE - odbiór wiórów: transporter wiórów - gospodarka chłodziwem: pompa chłodziwa - system gaśniczy: Kraft + Bauer - odciąg mgły olejowej: przygotowane przyłącze - dodatkowe wyposażenie: lampa sygnalizacyjna

Stanje: dober (rabljeno), Leto izdelave: 2004, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 420 mm, pomik po osi Z: 380 mm, model krmilnika: Heidenhain Mill Plus IT, skupna višina: 5.600 mm, skupna dolžina: 9.000 mm, skupna masa: 6.000 kg, For sale is a 5-axis machining center by DMU, model 50 eVolution. Special features include the GMN high-frequency spindle HCS 30,000/15 and the 92-position tool changer. The machine is in good condition and fully operational. Technical Data: Year of manufacture: 2004 Operating hours: approx. 39,000 h Control: Heidenhain MillPlus IT Table size: approx. 500 mm ⌀ Travel: X-axis: 500 mm Y-axis: 420 mm Z-axis: 380 mm A-axis: 0–180° C-axis: 360° Tool holder: HSK 50 Spindle speed: max. 30,000 rpm Frequency: 500 Hz Power: 15 kW Tool positions: 92 NO chip conveyor Space requirements according to drawing: 9,000 × 5,600 mm Transport dimensions: 2,800 × 3,700 × 2,800 mm Weight: 6,000 kg Transport and loading can be organized across Europe for an additional fee upon request. Prices are subject to VAT. Inspection possible by appointment. Contact us—our team is happy to assist you. Trade-in or exchange possible! Iedpfx Agotyit Ejpea Machine Purchasing & Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, AND MORE. Fzho0bc Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you planning to sell yours? For further information or to get in touch, please visit our website.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, DESCRIPTION Hermle C 800 V CNC Vertical Machining Centre, manufactured in August 2000 in Germany. This milling center operates in three axes, with maximum X / Y / Z travel distances of 800, 600, and 500 mm. The machine is equipped with a Sinumerik 840D numerical control system and features a LAN connection to an external computer. Additionally, this machining centre comes with a chip conveyor, hydraulic clamping, a magazine for 87 tools, a swivel probe, and an electrical cabinet cooling unit. The spindle reaches a maximum speed of 15,000 rpm. Recorded spindle hours: approximately 4,500 hours. The total weight of the machining centre is around 7 tons. Technical specifications of the Hermle C 800 V CNC machining centre – Travel (X / Y / Z axis): 800 / 600 / 500 mm – Rapid traverse: 35 m/min – Maximum spindle speed: 15,000 rpm – Oil mist extraction Isdpfxoiva Dko Agpsa – Spindle power: 19 kW – Operating voltage: 400V; 3PH; 50Hz – Control voltage: 220V AC; 24V DC – Machine dimensions (L x W x H): 2.3 x 3 x 2.65 m – Total weight: 7,000 kg Equipment of the Hermle C 800 V CNC machining centre – CNC control: Sinumerik 840D – Tool magazine capacity: 87 slots – Tool holders: SK40 – Through-spindle coolant pump: 40 bar – Electrical cabinet air conditioning – Swivel probe – Chip conveyor Available separately as pictured: Tool pre-setting device Various SK40 tool holders Heidenhain TS32 touch probe (as new)