Univerzalni obdelovalni center

Deckel Maho DMU 50 eVo

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control, Excellent Condition Technical Data: >> Year of manufacture: 2006 >> Heidenhain controller, type iTNC 530 >> Travel ranges X500/Y450/Z400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feedrate infinitely programmable up to X, Y, Z 20,000 mm/min C/B axis infinitely programmable up to rapid traverse speed >> Rapid traverse Y-Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 magazine positions >> Table clamping surface Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Iedpfx Afovyr Tdj Tjtb Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Heidenhain electronic handwheel HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> Through-spindle coolant (IKZ) 40 bar >> Coolant filtration system (fleece filter unit) >> Rinse gun >> Visiport >> Sealing air on measuring system >> Prepared for robotic loading >> Heidenhain 3D probe TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and tool breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all coolant and pneumatic hoses replaced, new filters, fluids, and belts replaced. Scrapers etc. fully cleaned. >> Geometric inspection (acceptance report available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection report has been prepared. You are welcome to view and test the machine under power at our premises.

Stanje: novo, 10T Premium Ramp, 2m Usable Internal Width, TM-GROUP – The Best Choice on the Market. ⭐️ Galvanized approach grating! ⭐️ ✅ Specifications: - Manufacturer: TM-GROUP - Maximum load capacity: 10 tons - Internal ramp width: 2000 mm - ELECTRIC and manual height adjustment, range: 1m – 1.6m - Galvanized and reinforced approach grating - Reinforced ramp railings on both sides - Full rubber transport wheels - Central ramp handle allows movement with a forklift - Adjustable angle and height of lip plate - Double-sided, reinforced support legs - Movable ramp components equipped with grease fittings - Ramp also equipped with a winch ✅ Approach Grating: - Galvanized grating with anti-slip grooves. Provides secure and safe surface. Both forklift and pedestrian use are guaranteed optimal grip and stability. Competing products mainly offer ramps with an approach section made of sheet metal covered with mesh. Our product features a true grooved grating – a much more durable solution, which allows dirt from forklift wheels to fall through, and prevents forklift skidding. ✅ Forklift latch – possible mounting on both sides: - Convenient and quick attachment for a forklift enables ramp transport in all directions. The specially designed handle allows for maneuverability even in confined spaces. ✅ Chain for connecting to truck, railway wagon, or fixed warehouse ramp: - Sturdy steel chain is another advantage of our ramp, providing additional safety and preventing ramp shifting during loading operations. ✅ Solid side railings: - Safety railings can be removed to install a frame or canopy (canopy is optional). ✅ Electric ramp height control: - Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V and can be operated from a standard socket. ✅ Dual-action manual pump: - Hydraulic pump for height adjustment when electric power is unavailable – dual-sided lifting. This is an excellent solution for operation under any conditions. ⭐️ Available variants: ⭐️ - Driveway width options: 1700 mm, 2000 mm, and 2500 mm – Standard, Premium, and Premium Plus. - Mobile ramps with 10t, 15t, 20t, and 25t load capacity. - Approach grating thickness: 3 – 5 cm. - Colours: red, blue, black, and green (custom colours available upon request) Ijdpfx Aowa Smpsf Totb - Mobile ramp with tarpaulin cover. As a manufacturer, we can produce ramps according to special, individual orders – with various dimensions, load capacities, or custom versions. Need a tailor-made solution you can't find among published listings? Contact our specialist. Tags: Dock ramp, unloading ramp, loading ramp, mobile ramp, loading dock, dock leveler, mobile dock ramp, mobile loading ramp.

Stanje: rabljeno, Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Obdelovalni center DMG Deckel Maho 5 sočasnih osi Tip DMU 50 EVO Linear Leto 2006 Popoln stroj Z dokumentacijo CNC Heidenhain tip Mill Plus Stroj odklopljen Ijdpfextqfnjx Af Totb Pripravljen za nakladanje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 42.768 h, Krmilna enota Znamka: HEIDENHAIN Isdpfsx Rd Hpjx Af Totb Glavni pogon Število osi: 5 Število vrtljajev vretena: 18.000 min⁻¹ Orodni konus: SK 40 Ta 5-osni DMG DECKEL MAHO DMU 50 eVo linear je bil izdelan leta 2005. Opremljen je s krmiljenjem HEIDENHAIN, notranjim hlajenjem z 40 bar, 60-orodnim magazinom ter vretenom z do 18.000 obrati na minuto. Stroj omogoča popolnoma nastavljivo avtomatizacijo za različne formate in pozicioniranje izdelkov. Če iščete visoko kakovostne zmogljivosti rezkanja, razmislite o stroju DMG DECKEL MAHO DMU 50 eVo linear, ki je naprodaj. Za več informacij nas kontaktirajte. Vrste uporabe Rezkanje

Stanje: rabljeno, Leto izdelave: 2006, X-travel: 600 mm Y-travel: 400 mm Z-travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Number of magazine positions: 40 Itjdpfx Afsv Az Uco Teb Max. tool width: 80 mm Max. tool diameter with free adjacent box: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 2.8 sec Tool change time (tool-to-tool): 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space requirements approx.: 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours

Stanje: rabljeno, Leto izdelave: 2006, obratovalne ure: 37.654 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 10915548924, največja hitrost vretena: 18.000 obr/min, Oprema: dokumentacija / priročnik, transportni trak za ostružke, vrtilna hitrost brezstopenjsko nastavljiva, Ponujamo to rabljeno univerzalno obdelovalno središče Deckel Maho DMU 50 eVo linear, letnik 2006. Vodila osi X, Y in Z ter kroglična vretena so bila konec leta 2023 popolnoma zamenjana. Stroj je trenutno geometrijsko kot nov. Za dodatna vprašanja ali informacije nam pišite ali nas pokličite. Isdpfx Ajx Srp Ujf Tjtb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Deckel Maho DMU 50 EVO Linear with ITNC 530 About the Machine: Fast and flexible 5-axis simultaneous milling machine, in very good condition. Fully equipped! Suitable for connection to automation systems! Technical Data: - Control: Heidenhain ITNC 530 - Travel X, Y, Z axes: 500/450/400 mm - Travel B, C axes: 161.955°/360° - Clamping area rotary table: 500 x 380 mm - Rapid traverse X-80 m/min, Y-50 m/min, Z-50 m/min, B-40 rpm, C-50 rpm - Spindle speed: 20-18000 rpm - Tool holder: SK40 - Tool magazine with 60 positions - Network connectivity - Automation interface possible Equipment: - Internal coolant supply with belt filter system - Work area rinsing - Heidenhain TS 649 probe - Coolant and compressed air switching via M-function - Oil mist extraction - Rinse gun - Chip conveyor - Handheld control unit Installation dimensions L x W x H: 3800 x 3200 x 2800 mm Weight approx. 6500 kg Viewing/testing under power on site is of course possible. We are happy to offer you transport, installation, and on-site commissioning as a complete package. Everything from one source: We, Baumgärtner CNC GmbH, are a company specializing in: - Service - Maintenance - Overhaul - Automation Itedsx Hwhrspfx Af Teb of DMG machines and other renowned manufacturers. We are at your side! From the purchase of the machine, through transport and installation, to commissioning and subsequent maintenance or repair work, you can rely on us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 37 kVA, vrtilni moment: 236 Nm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: iTNC530, širina mize: 700 mm, dolžina mize: 1.700 mm, obremenitev mize: 700 kg, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 9.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 16.580 h, moč vretenovega motorja: 37 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3-axis CNC machining center, Heidenhain iTNC530 X-axis travel: 1500 mm Iodpfx Afevz Tyus Totb Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Table load capacity: 700 kg Through spindle coolant: 20 bar Chip conveyor Manual pulse generator (handwheel)

Stanje: rabljeno, Leto izdelave: 2008, x-hod 500 mm y-hod 450 mm z-hod 400 mm Krmilnik HEIDENHAIN iTNC 530 Velikost mize 500 x 380 mm Obremenitev mize 500 kg c-os 0,001º (± 360º) b-os 180° Hitri pomik os X 80 m/min Pomiki 50 m/min Hitrost vretena 18.000 obr/min Vpenjanje vretena BT-40 Motor vretena 30 kW Notranje hlajenje dovod 40 bar Ročni upravljalec HEIDENHAIN HR-410 Delovne ure 51.770 h Ure vretena 14.627 h Skupna potrebna moč 50 kVA Teža stroja ca. 6,5 t Itedpfx Afexluf Aj Tsb

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC 5-osni rezkalni stroj Deckel Maho (DMG). Hodi osi X/Y/Z: 500mm/420mm/380mm, orodnih mest: 30, hitrost vrtenja: 18.000 rpm, največja teža obdelovanca: 200kg, premer mize: 650mm, natančnost pozicioniranja: +/-0,015mm, hitro pomikanje: 24m/min. Dimenzije stroja X/Y/Z: cca 2500mm/3000mm/2500mm, teža: cca 5000kg, krmilje: Heidenhain MillPlusIT, delovni čas: 52.590h, čas vretena: 22.009h. Kodirnik stroja občasno odpove. Dokumentacija na voljo. Možen je ogled na lokaciji. Itedpfx Ajx Dm D Uef Teb

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno),

Stanje: dober (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Main Drive Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Work Spindle: Taper type: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X axis AC servo motors: C, B, Y, Z Feed speed X, Y, Z: Up to 20,000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring system Resolution: C, B, X, Y, Z: 0.001 mm Positioning tolerance: C, B, X, Y, Z: 0.010 mm Working Range X axis: 500 mm Y axis: 450 mm Z axis: 400 mm B axis: 0° to 161.955° C axis: n x 360° Tool Changer with Double Gripper Magazine positions: 120 Max. tool diameter without adjacent free slots: 80 mm Max. tool diameter with adjacent free slots: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg Itedsu Hkb Rspfx Af Tob NC Rotary Table with Swivel Axis C axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance between T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Setup weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF SUPPLY Includes (but is not limited to): Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage detection Blum touch probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation No liability is assumed for the correctness, completeness, or accuracy of the information provided.

Stanje: dober (rabljeno), Leto izdelave: 2006, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, širina mize: 380 mm, dolžina mize: 500 mm, obremenitev mize: 200 kg, montažni premer: 30 mm, Merilna sonda TS640 Rezervoar 600 l s 40 bar notranjim hlajenjem (IKZ) Podaljšan transportni trak za odrezke za 30/60 orodij ATC Neposredne merilne letve tudi na B- in C-osi Zračno centrirano vreteno prek M-funkcije X-os: 500 mm Y-os: 450 mm Z-os: 400 mm A-os: 360° B-os: 0–108° Dolžina mize: 500 mm Širina mize: 380 mm Obremenitev mize: 200 kg Pomik X-os: 50.000 mm/min Pomik Y-os: 50.000 mm/min Pomik Z-os: 50.000 mm/min Nosilec orodja: 40ISO/BT/MK Itsdpfx Afjw Rl Ige Tob Moč vretena: 35 kW Št. vrtljajev: 18.000 obr/min Izmenjevalec orodij: 30 IKZ: 20 Število krmiljenih osi: 3+2 Transporter odrezkov: da Hladilna naprava: da Dolžina: 3.800 mm Širina: 3.200 mm Višina: 2.800 mm Teža: 6.500 kg

Stanje: dober (rabljeno), Leto izdelave: 2003, Main spindle: Speed range – main spindle: max. 6,000 rpm Drive power – main spindle: 16 kW Max. torque: 155 Nm C-axis: 360° Tool turret: Number of tool stations: 12 positions Number of driven tool stations: 12 positions Speed range – driven tools: max. 5,000 rpm Drive power – driven tools: 10 kW Tool holder: (VDI 30) Tool shank: 20 x 20 mm Travel distances: X-axis: 160 mm Z-axis: 450 mm Feed rates: Rapid traverse X: 60 m/min Rapid traverse Z: 45 m/min Feed force X: 2.5 kN Feed force Z: 4 kN Rapid traverse C: 200 rpm Max. torque C: 155 Nm Itodpfx Afov Drigo Tob Total connected load: Approx. machine weight: 3.7 t Approx. space requirement: 4.5 x 2.5 x 2.5 m Control: Heidenhain Hollow clamping cylinder C-axis and tool drive Chip conveyor Oil and emulsion mist separator with electrostatic filter

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, obratovalne ure: 8.725 h, Funkcionalnost: popolnoma funkcionalen, Deckel Maho DMU 50 EVO with ITNC 530 About the machine: Only 2,684 spindle hours! Like new condition! All hoses (pneumatic, coolant, and cooling) have been replaced. The machine has been fully cleaned. It has been inspected and measured; a geometry protocol has been created. Geometry is excellent. Top configuration! -Control: Heidenhain ITNC 530 -Traverse paths X, Y, Z axes: 500/420/380 mm -Rapid traverse: 50 m/min -Spindle speed: 20–18,000 rpm Itodpfxexf Ud Sj Af Tob -Tool holder: SK40 DIN 69871 -Tool magazine with 32 positions -Machine weight approx. 6,500 kg -Chip conveyor -Internal coolant supply, 40 bar with band filter (rotary union NEW) -Rinse gun -Coolant/air blast switching (M25) -Heidenhain TS 640 probe -NEW Renishaw tool measurement probe (auto retracting) -Kinematic Qickset -Network connectivity -Automation integration possible A viewing or test under power is of course possible on site. We are happy to offer you transport, installation, and commissioning at your premises. Everything from a single source: We, Baumgärtner CNC GmbH & Co.KG, are a company specializing in: -Service -Maintenance -Overhaul -Automation for DMG machines and other renowned manufacturers. We accompany you! From purchasing the machine, through transport and installation, all the way to commissioning and subsequent maintenance or repair services, you can rely on us.