Obdelovalni center
Deckel Maho DMU 50 EVO linear

Name: Deckel Maho DMU 50 EVO linear
Brand: Deckel Maho
Availability: InStock

Leto izdelave

2006

Stanje

Rabljeno

Lokacija

Ubstadt-Weiher Nemčija

Obdelovalni center Deckel Maho DMU 50 EVO linear

Prikaži karto

Podatki o stroju

Opis stroja:: Obdelovalni center

Proizvajalec:: Deckel Maho

Model:: DMU 50 EVO linear

Leto izdelave:: 2006

Stanje:: zelo dobro (rabljeno)

funkcionalnost:: popolnoma funkcionalen

Cena in lokacija

Lokacija:: Großer Sand 19-21, 76698 Ubstadt-Weiher, DE

Klic

Prodaja strojev

Ste našli novo napravo? Zdaj staro pretvorite v denar. Dosežite najboljšo ceno prek Machineseeker.
Več o prodaji strojev

Tehnične podrobnosti

Oprema:: dokumentacija / priročnik, transportni trak za ostružke

Podrobnosti ponudbe

ID ponudbe:: A18496451

Nazadnje posodobljeno:: dne 12.02.2025

Opis

Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control, Excellent Condition

Technical Data:

>> Year of manufacture: 2006
>> Heidenhain controller, type iTNC 530
>> Travel ranges X500/Y450/Z400 mm
>> C-axis: 360 degrees
>> B-axis: 0 to 161.955 degrees
>> Tool holder: HSK A63
>> Max. spindle speed: up to 18,000 rpm
>> Feedrate infinitely programmable up to X, Y, Z 20,000 mm/min
C/B axis infinitely programmable up to rapid traverse speed
>> Rapid traverse Y-Z axes: 50 m/min
X-axis: 80 m/min (linear drive)
B-axis: 40 rpm
C-axis: 50 rpm
>> Tool magazine: double gripper, 60 magazine positions
>> Table clamping surface Ø 500 x 380 mm
T-slot spacing: 63/14H7
>> Table load capacity: 200 kg
>> Dimensions and weight (approx.):
Machine without control and attachments
Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m
Weight: approx. 7,000 kg
>> Operating voltage: 400 V
>> Heidenhain electronic handwheel HR 410
>> Power connection: 17 kVA
>> Chip conveyor
>> Active spindle cooling
>> Mist extraction unit
>> Through-spindle coolant (IKZ) 40 bar
>> Coolant filtration system (fleece filter unit)
>> Rinse gun
>> Visiport
>> Sealing air on measuring system
>> Prepared for robotic loading
>> Heidenhain 3D probe TS640
>> 3D Quick Set
>> Kinematics
>> Blum laser for tool measurement and tool breakage control
>> Complete documentation
Crsdpfxovyr Tds Agteh

The following works have been carried out:

>> Main spindle completely overhauled
>> Complete maintenance: all coolant and pneumatic hoses replaced, new filters, fluids, and belts replaced. Scrapers etc. fully cleaned.
>> Geometric inspection (acceptance report available)

About the machine:

For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection report has been prepared. You are welcome to view and test the machine under power at our premises.

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.

Ponudnik

Registriran od: 2007

94 Oglasi na spletu

Klic

Pošlji zahtevo

Telefon & Faks

+49 7251 ... oglasi

Faks:

Ti oglasi bi vas prav tako lahko zanimali.

mali oglas

5-osni obdelovalni center DECKEL MAHO Deckel Maho DMU 50 eVo Linear

Babberich

908 km

5-osni obdelovalni center DECKEL MAHO
Deckel MahoDMU 50 eVo Linear

Klic

Stanje: dober (rabljeno), Leto izdelave: 2006, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, širina mize: 380 mm, dolžina mize: 500 mm, obremenitev mize: 200 kg, nosilec orodja: 30 mm, Merilna sonda TS640 Rezervoar 600 l s 40 bar notranjim hlajenjem (IKZ) Podaljšan transportni trak za odrezke za 30/60 orodij ATC Neposredne merilne letve tudi na B- in C-osi Zračno centrirano vreteno prek M-funkcije X-os: 500 mm Y-os: 450 mm Z-os: 400 mm A-os: 360° B-os: 0–108° Dolžina mize: 500 mm Širina mize: 380 mm Obremenitev mize: 200 kg Pomik X-os: 50.000 mm/min Pomik Y-os: 50.000 mm/min Pomik Z-os: 50.000 mm/min Nosilec orodja: 40ISO/BT/MK Moč vretena: 35 kW Csdpfjw Rl Igex Agtsrh Št. vrtljajev: 18.000 obr/min Izmenjevalec orodij: 30 IKZ: 20 Število krmiljenih osi: 3+2 Transporter odrezkov: da Hladilna naprava: da Dolžina: 3.800 mm Širina: 3.200 mm Višina: 2.800 mm Teža: 6.500 kg

Poglej podrobnosti

Dražba

Univerzalni obdelovalni center Deckel Maho DMU 50 eVo linear

Overijssel

930 km

Univerzalni obdelovalni center
Deckel MahoDMU 50 eVo linear

Podrobnosti

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 1.380 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 18.000 obr/min, število mest v zalogovniku orodij: 30, kot vrtenja osi B (max.): 108 °, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Csdpfewu Evtsx Agtjrh Tool stations: 30 Table size: 500 x 380 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC swivel rotary table - Internal coolant supply (IKZ): 40 bar prepared - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement

Poglej podrobnosti

mali oglas

Obdelovalni center - univerzalni Deckel Maho DMU 50 evo linear

Bühl

587 km

Obdelovalni center - univerzalni
Deckel MahoDMU 50 evo linear

Klic

Stanje: rabljeno, Leto izdelave: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Control MillPlus iT Clamping table surface ø 500 x 380 mm B-axis 0 - 161.955° C-axis 360° Spindle taper SK 40 Spindle speeds 20 - 18,000 rpm Crjdpfxswlvi Eo Agtsh Max. spindle power 35 kW Max. torque at spindle 130 Nm Infinitely variable feeds up to 20,000 mm/min Rapid traverse X/Y/Z-axis 80 / 50 / 50 m/min Rapid traverse B-axis 40 rpm C-axis rapid traverse 50 rpm Number of tool magazine positions 30 Tool diameter with 2 free adjacent positions 130 mm Tool diameter when fully equipped 80 mm Max. tool length 300 mm Max. tool weight 6 kg Internal coolant supply 40 bar Total power requirement 52 kVA Machine weight approx. 6 t = 5-axis machining centre with 2-axis NC swivelling rotary table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Poglej podrobnosti

mali oglas

Zuchwil

580 km

Obdelovalni center
Deckel MahoDMU 50 EVO Linear

Klic

Stanje: dober (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Main Drive Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Work Spindle: Taper type: HSK-A63 Tool clamping: Hydraulic Crodpfx Aeu Hkb Rsgteh Feed Drive Linear motor: X axis AC servo motors: C, B, Y, Z Feed speed X, Y, Z: Up to 20,000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring system Resolution: C, B, X, Y, Z: 0.001 mm Positioning tolerance: C, B, X, Y, Z: 0.010 mm Working Range X axis: 500 mm Y axis: 450 mm Z axis: 400 mm B axis: 0° to 161.955° C axis: n x 360° Tool Changer with Double Gripper Magazine positions: 120 Max. tool diameter without adjacent free slots: 80 mm Max. tool diameter with adjacent free slots: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance between T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Setup weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF SUPPLY Includes (but is not limited to): Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage detection Blum touch probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation No liability is assumed for the correctness, completeness, or accuracy of the information provided.

Poglej podrobnosti

Oglašujte tukaj