Univerzalni obdelovalni center

Deckel Maho DMU 50 eVo linear

Stanje: rabljeno, Leto izdelave: 2008, x-hod 500 mm y-hod 450 mm z-hod 400 mm Dkjdpfjxluf Aex Ag Nsu Krmiljenje HEIDENHAIN iTNC 530 Dimenzije mize 500 x 380 mm Obremenitev mize 500 kg c-os 0,001º (± 360º) b-os 180° Hitri pomik X-osi 80 m/min Podajalne hitrosti 50 m/min Vrtljaji vretena 18.000 min⁻¹ Vretenov nosilec BT-40 Vretenov motor 30 kW Notranje hlajenje 40 bar Ročno kolo HEIDENHAIN HR-410 Skupna priključna moč 50 kVA Teža stroja ca. 6,5 t

Stanje: dober (rabljeno), Leto izdelave: 2006, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, širina mize: 380 mm, dolžina mize: 500 mm, obremenitev mize: 200 kg, montažni premer: 30 mm, Merilna sonda TS640 Rezervoar 600 l s 40 bar notranjim hlajenjem (IKZ) Podaljšan transportni trak za odrezke za 30/60 orodij ATC Neposredne merilne letve tudi na B- in C-osi Zračno centrirano vreteno prek M-funkcije X-os: 500 mm Y-os: 450 mm Z-os: 400 mm A-os: 360° B-os: 0–108° Dolžina mize: 500 mm Širina mize: 380 mm Obremenitev mize: 200 kg Pomik X-os: 50.000 mm/min Pomik Y-os: 50.000 mm/min Pomik Z-os: 50.000 mm/min Nosilec orodja: 40ISO/BT/MK Moč vretena: 35 kW Št. vrtljajev: 18.000 obr/min Izmenjevalec orodij: 30 IKZ: 20 Število krmiljenih osi: 3+2 Transporter odrezkov: da Hladilna naprava: da Dolžina: 3.800 mm Dsdpfx Agsw Rl Igj Njku Širina: 3.200 mm Višina: 2.800 mm Teža: 6.500 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control, Excellent Condition Technical Data: >> Year of manufacture: 2006 >> Heidenhain controller, type iTNC 530 >> Travel ranges X500/Y450/Z400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feedrate infinitely programmable up to X, Y, Z 20,000 mm/min C/B axis infinitely programmable up to rapid traverse speed >> Rapid traverse Y-Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 magazine positions >> Table clamping surface Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Heidenhain electronic handwheel HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> Through-spindle coolant (IKZ) 40 bar >> Coolant filtration system (fleece filter unit) >> Rinse gun >> Visiport >> Sealing air on measuring system >> Prepared for robotic loading >> Heidenhain 3D probe TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and tool breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all coolant and pneumatic hoses replaced, new filters, fluids, and belts replaced. Scrapers etc. fully cleaned. >> Geometric inspection (acceptance report available) Djdpfjvyr Tdex Ag Neku About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection report has been prepared. You are welcome to view and test the machine under power at our premises.

Stanje: rabljeno, Leto izdelave: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Control MillPlus iT Clamping table surface ø 500 x 380 mm B-axis 0 - 161.955° C-axis 360° Spindle taper SK 40 Spindle speeds 20 - 18,000 rpm Max. spindle power 35 kW Max. torque at spindle 130 Nm Infinitely variable feeds up to 20,000 mm/min Dodjwlvi Eopfx Ag Neku Rapid traverse X/Y/Z-axis 80 / 50 / 50 m/min Rapid traverse B-axis 40 rpm C-axis rapid traverse 50 rpm Number of tool magazine positions 30 Tool diameter with 2 free adjacent positions 130 mm Tool diameter when fully equipped 80 mm Max. tool length 300 mm Max. tool weight 6 kg Internal coolant supply 40 bar Total power requirement 52 kVA Machine weight approx. 6 t = 5-axis machining centre with 2-axis NC swivelling rotary table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Stanje: dober (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Main Drive Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Work Spindle: Taper type: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X axis AC servo motors: C, B, Y, Z Feed speed X, Y, Z: Up to 20,000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring system Resolution: C, B, X, Y, Z: 0.001 mm Positioning tolerance: C, B, X, Y, Z: 0.010 mm Working Range X axis: 500 mm Y axis: 450 mm Z axis: 400 mm B axis: 0° to 161.955° C axis: n x 360° Dkjdpsu Hkb Rofx Ag Nju Tool Changer with Double Gripper Magazine positions: 120 Max. tool diameter without adjacent free slots: 80 mm Max. tool diameter with adjacent free slots: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance between T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Setup weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF SUPPLY Includes (but is not limited to): Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage detection Blum touch probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation No liability is assumed for the correctness, completeness, or accuracy of the information provided.