Univerzalni obdelovalni center

Deckel Maho DMU 50 eVo linear

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 32.498 h, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, nazivna (navidezna) moč: 35 kVA, proizvajalec krmilnikov: Heidenhain iTNC 530, širina obdelovanca (maks.): 500 mm, premer obdelovanca (maks.): 630 mm, teža obdelovanca (maks.): 200 kg, skupna višina: 2.590 mm, skupna dolžina: 4.780 mm, skupna širina: 4.410 mm, skupna masa: 5.900 kg, hitrost vretena (min.): 18.000 obr/min, moč vretenovega motorja: 35.000 W, Year of manufacture: 2010 CNC control: Heidenhain iTNC 530 Axes Travel X-axis (mm): 500 Travel Y-axis (mm): 450 Travel Z-axis (mm): 400 C-axis indexing (degrees): 360º (0.001) B-axis indexing (degrees): 0º/108º (0.001) Rapid traverse (m/min): 80/50/50 NC milling/turning table: Pallet dimensions (mm): Ø390 Max. workpiece size (D x H, mm): Ø630 x 500 Max. workpiece weight (kg): 200 Spindle Max. spindle speed (rpm): 18,000 Spindle drive power (kW): 35/25 (40% duty cycle/continuous) Spindle torque (Nm): 130/87 Cooling Coolant supply through spindle (bar): 40 Tool system Tool holder: HSK-A 63 Number of tools in magazine: 30 With empty adjacent slots (mm): 130 With occupied adjacent slots (mm): 80 Max. tool length (mm): 300 Tool change (chip-to-chip, sec.): 5 Equipment Chip conveyor Infrared probe Rinsing gun Air blast through spindle centre controllable via M-function Signal light Laser tool measurement for tool length and diameter Programmable coolant nozzles Njdpsyi Dniofx Ag Towc Heat exchanger Direct XYZ measuring system Electrical cabinet active cooling unit Oil skimmer Prepared for internal coolant supply (40/80 bar) RENISHAW probe Automatic door Machine operating hours: Power-on hours: 54,257 Spindle operating hours: 32,498 Total power requirement (kVA): 48 Basic machine: Dimensions/weight Length (mm): 4,780 Width (mm): 4,410 Height (mm): 2,590 Weight (kg): 5,900

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.700 mm, pomik po osi Z: 1.500 mm, Heidenhain 530 Diagonalna rezkalna glava z indeksacijo 2,5° x 2,5° Število vrtljajev do 6.000 min⁻¹ Orodno vpenjalo SK50 Notranje hlajenje 36 bar Nwjdpfx Aox I A Hvog Tsc Transporter za ostružke v vzdolžni smeri + prečni transporter

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, obratovalne ure: 42.768 h, proizvajalec krmilnikov: HEIDENHAIN, največja hitrost vretena: 18.000 obr/min, število osi: 5, Táto 5-osna DMG DECKEL MAHO DMU 50 eVo linear je bila izdelana leta 2005. Opremljena je s krmiljenjem HEIDENHAIN, notranjim hlajenjem skozi vreteno (IKZ) s tlakom 40 barov, skladiščem za 60 orodij in vretenom z do 18.000 vrt/min. Stroj ima avtomatizacijske možnosti, ki so popolnoma nastavljive za različne formate izdelkov in pozicioniranja. Če iščete kakovostno rezkalno stroj, razmislite o naši ponudbi stroja DMG DECKEL MAHO DMU 50 eVo linear. Za več informacij nas kontaktirajte. • Magazin za orodja: 60 orodij • Hlajenje skozi vreteno (IKZ): 40 barov • Vreteno obnovljeno leta 2024 • Obnova osi B in C leta 2024 Nodsx Rd Hpopfx Ag Towc Dodatna oprema • Avtomatizacija (obdelava izdelkov), prosto nastavljiva glede na format in pozicijo izdelka • Filter s papirnatim trakom • Blum laserska detekcija zloma orodja • Odsesovalni sistem ni vključen Tehnične specifikacije Sistem stožca SK 40

Leto izdelave: 2007, Stanje: pripravljen za uporabo (rabljen), Na voljo je CNC 5-osni rezkalni stroj Deckel Maho (DMG). Hodi osi X/Y/Z: 500mm/420mm/380mm, orodnih mest: 30, hitrost vrtenja: 18.000 rpm, največja teža obdelovanca: 200kg, premer mize: 650mm, natančnost pozicioniranja: +/-0,015mm, hitro pomikanje: 24m/min. Dimenzije stroja X/Y/Z: cca 2500mm/3000mm/2500mm, teža: cca 5000kg, krmilje: Heidenhain MillPlusIT, delovni čas: 52.590h, čas vretena: 22.009h. Kodirnik stroja občasno odpove. Dokumentacija na voljo. Možen je ogled na lokaciji. Nwjdpex Dm D Usfx Ag Tsc

Stanje: zelo dobro (rabljeno), Novo 2006 Brother CNC-B00 krmiljenje Čas menjalca palet: 3,4 sekunde Velikost palete: 600 x 425 mm X-os: 550 mm Y-os: 400 mm Z-os: 415 mm Hitrost vretena: 12.000 min⁻¹ (rpm) 40-postajni avtomatski menjalec orodij (ATC) Njdpferfxr Ujx Ag Tswc Vpenjalni stožec: BT30

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, transportni trak za ostružke, Deckel Maho DMU 50 evo Linear with Heidenhain TNC 530 Control, Excellent Condition Technical Data: >> Year of manufacture: 2006 >> Heidenhain controller, type iTNC 530 >> Travel ranges X500/Y450/Z400 mm >> C-axis: 360 degrees >> B-axis: 0 to 161.955 degrees >> Tool holder: HSK A63 >> Max. spindle speed: up to 18,000 rpm >> Feedrate infinitely programmable up to X, Y, Z 20,000 mm/min C/B axis infinitely programmable up to rapid traverse speed >> Rapid traverse Y-Z axes: 50 m/min X-axis: 80 m/min (linear drive) B-axis: 40 rpm C-axis: 50 rpm >> Tool magazine: double gripper, 60 magazine positions >> Table clamping surface Ø 500 x 380 mm T-slot spacing: 63/14H7 >> Table load capacity: 200 kg >> Dimensions and weight (approx.): Machine without control and attachments Depth: 3.0 m, Width: 2.4 m, Height: 2.6 m Weight: approx. 7,000 kg >> Operating voltage: 400 V >> Heidenhain electronic handwheel HR 410 >> Power connection: 17 kVA >> Chip conveyor >> Active spindle cooling >> Mist extraction unit >> Through-spindle coolant (IKZ) 40 bar >> Coolant filtration system (fleece filter unit) >> Rinse gun >> Visiport >> Sealing air on measuring system >> Prepared for robotic loading >> Heidenhain 3D probe TS640 >> 3D Quick Set >> Kinematics >> Blum laser for tool measurement and tool breakage control >> Complete documentation The following works have been carried out: >> Main spindle completely overhauled >> Complete maintenance: all coolant and pneumatic hoses replaced, new filters, fluids, and belts replaced. Scrapers etc. fully cleaned. Nwsdpsvyr Tdefx Ag Tsc >> Geometric inspection (acceptance report available) About the machine: For sale is a Deckel Maho DMU 50 evo Linear machining center with Heidenhain TNC 530 3D path control. The machine is in very good condition. The main spindle has been overhauled (exchange spindle), completely serviced, and an inspection report has been prepared. You are welcome to view and test the machine under power at our premises.

Stanje: dober (rabljeno), Leto izdelave: 2006, TECHNICAL DATA Main Drive Speed: Continuously programmable: 18,000 rpm In setup mode: 20 – 800 rpm Work Spindle: Taper type: HSK-A63 Tool clamping: Hydraulic Feed Drive Linear motor: X axis AC servo motors: C, B, Y, Z Feed speed X, Y, Z: Up to 20,000 mm/min Rapid traverse Y, Z: 50 m/min X: 80 m/min B: 40 rpm C: 50 rpm Measuring system Resolution: C, B, X, Y, Z: 0.001 mm Positioning tolerance: C, B, X, Y, Z: 0.010 mm Nedpfou Hkb Rex Ag Tjwc Working Range X axis: 500 mm Y axis: 450 mm Z axis: 400 mm B axis: 0° to 161.955° C axis: n x 360° Tool Changer with Double Gripper Magazine positions: 120 Max. tool diameter without adjacent free slots: 80 mm Max. tool diameter with adjacent free slots: 130 mm Max. tool length from spindle nose: 300 mm Max. tool weight: 6 kg NC Rotary Table with Swivel Axis C axis: Clamping surface rotary axis (mm): 500 x 380 mm Distance between T-slots / size: 63 / 14 H7 Centering bore: 30 H6 Max. torque: 1,491 Nm Max. table rotation speed: 50 rpm B axis: Max. swivel torque: 1,864 Nm Swivel speed: 40 rpm Swivel range: 0° - 161.955° Input and display increment: 0.001° Weight: 420 kg Max. load: 200 kg Weight: Approx. 6,800 kg Setup weight: Approx. 7,500 kg Dimensions: 4,170 x 3,133 x 2,560 mm SCOPE OF SUPPLY Includes (but is not limited to): Deckel Maho DMU 50 Evo CNC machining centre Heidenhain iTNC 530 Tool breakage detection Blum touch probe Oil mist separator Fire extinguishing system High-pressure pump and belt filter system Chip conveyor Exact scope of delivery as per photo documentation No liability is assumed for the correctness, completeness, or accuracy of the information provided.

Stanje: rabljeno, Leto izdelave: 2014, Drive power 3 kW Operating pressure 7 bar Nsdjh A Sfdopfx Ag Tswc Flow rate / l Weight 286 kg Chicago Pneumatic CPVR15 CE Screw Compressor – Year of manufacture 2014 The CPVR15 CE impresses with its robust construction, long service life, and low operating costs. Whether in craft businesses, workshops, or industrial applications – this compressor reliably delivers the compressed air you need. Drive power: 3 kW Operating pressure: 7 bar Air delivery: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50–58 dB(A) Voltage/Frequency: 415 V / 50 Hz Applications: Workshops, craft businesses, industrial applications with medium compressed air requirements Scope of delivery: 1x Compressor - Chicago Pneumatic CPVR15 CE 1x Refrigeration dryer - OMI ESD 108 - 0.70 kW 1x Beko Öwamat 2 - Oil-water separator Technical data taken from publicly available sources.

Stanje: dober (rabljeno), Leto izdelave: 2006, pomik osi Y: 450 mm, pomik po osi Z: 400 mm, hitro pomikanje X-os: 50.000 m/min, hitri pomik os Y: 50.000 m/min, hitri pomik na osi Z: 50.000 m/min, širina mize: 380 mm, dolžina mize: 500 mm, obremenitev mize: 200 kg, montažni premer: 30 mm, Merilna sonda TS640 Rezervoar 600 l s 40 bar notranjim hlajenjem (IKZ) Podaljšan transportni trak za odrezke za 30/60 orodij ATC Neposredne merilne letve tudi na B- in C-osi Zračno centrirano vreteno prek M-funkcije X-os: 500 mm Y-os: 450 mm Z-os: 400 mm Nwsdpfjw Rl Igjx Ag Tsc A-os: 360° B-os: 0–108° Dolžina mize: 500 mm Širina mize: 380 mm Obremenitev mize: 200 kg Pomik X-os: 50.000 mm/min Pomik Y-os: 50.000 mm/min Pomik Z-os: 50.000 mm/min Nosilec orodja: 40ISO/BT/MK Moč vretena: 35 kW Št. vrtljajev: 18.000 obr/min Izmenjevalec orodij: 30 IKZ: 20 Število krmiljenih osi: 3+2 Transporter odrezkov: da Hladilna naprava: da Dolžina: 3.800 mm Širina: 3.200 mm Višina: 2.800 mm Teža: 6.500 kg

Stanje: rabljeno, Leto izdelave: 2008, x-travel 500 mm y-travel 450 mm z-travel 400 mm Control HEIDENHAIN Control MillPlus iT Clamping table surface ø 500 x 380 mm B-axis 0 - 161.955° C-axis 360° Spindle taper SK 40 Spindle speeds 20 - 18,000 rpm Max. spindle power 35 kW Max. torque at spindle 130 Nm Infinitely variable feeds up to 20,000 mm/min Rapid traverse X/Y/Z-axis 80 / 50 / 50 m/min Rapid traverse B-axis 40 rpm C-axis rapid traverse 50 rpm Number of tool magazine positions 30 Tool diameter with 2 free adjacent positions 130 mm Tool diameter when fully equipped 80 mm Nwodpfewlvi Eox Ag Tjc Max. tool length 300 mm Max. tool weight 6 kg Internal coolant supply 40 bar Total power requirement 52 kVA Machine weight approx. 6 t = 5-axis machining centre with 2-axis NC swivelling rotary table Accessories: electronic handwheel, chip conveyor, coolant system, belt filter unit

Stanje: zelo dobro (rabljeno), CNC stružnica DMG CLX 450 V3, letnik 2018, Siemens, v zelo dobrem stanju Nodpex Hqh Sefx Ag Tswc

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 1.380 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 500 mm, pomik osi Y: 450 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 18.000 obr/min, število mest v zalogovniku orodij: 30, kot vrtenja osi B (max.): 108 °, kot vrtenja osi C (maks.): 360 °, TECHNICAL DETAILS Travel X-axis: 500 mm Travel Y-axis: 450 mm Travel Z-axis: 400 mm B-axis: 108° C-axis: 360° Spindle speed range: 18,000 rpm Tool holder: HSK-63-A Tool stations: 30 Table size: 500 x 380 mm Nwedpfxewu Evte Ag Tsc Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 50 m/min Rapid traverse Z-axis: 50 m/min Feed rate X-axis: 20 m/min Feed rate Y-axis: 20 m/min Feed rate Z-axis: 20 m/min MACHINE DETAILS Control: Heidenhain iTNC 530 Machine weight: 6,500 kg Operating hours: 1,380 h Power-on hours: 19,803 h EQUIPMENT - 5-axis simultaneous machining - Tool changer - NC swivel rotary table - Internal coolant supply (IKZ): 40 bar prepared - Paper band filter - Chip conveyor - 3D probe: Renishaw preparation (probe not included) - Blum laser tool measurement