Hladilnik vode

DALEX ES 1

Leto izdelave: 2006, Stanje: dober (rabljeno), Agfa chiller (cooling system) for Agfa and Screen CTP systems. Ihjdpfxedtr A Ts Af Tst Tested and inspected,

Leto izdelave: 1982, Stanje: dober (rabljeno), Motorised Round Bending Machine Manufacturer: FASTI Type: 106-20-2 Year: 1982 Bending capacity: 2040 mm x 2 mm in steel Roll diameter: 110 mm, with pre-bending feature. Roll drive: Motorised Roll adjustment: Motorised Space requirement: 2.5 m x 1 m x 1.2 m Weight: approx. 2,000 kg Isdpfxsk Iymxj Af Tjht Machine in good condition, under power and can be demonstrated.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, obratovalne ure: 7.647 h, potovalna razdalja osi X: 2.300 mm, pomik osi Y: 800 mm, pomik po osi Z: 850 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, skupna masa: 18.500 kg, največja hitrost vretena: 12.000 obr/min, moč vretenovega motorja: 26.500 W, teža orodja: 10.000 g, število osi: 5, This 5-axis HEDELIUS T8 - 2300 was manufactured in 2006 and stands out as a robust vertical machining center. It offers a large travel range of 2300/800/850 mm and a high spindle speed of up to 12,000 rpm. The machine comes equipped with an NC swivel head for the B-axis, a tool magazine with 40 positions, and supports a maximum workpiece weight of 2,500 kg. Consider the opportunity to purchase this vertical machining center HEDELIUS T8 - 2300. Contact us for further information. • NC swivel head, B-axis: +92° / -92° • Maximum pendulum movement: 2 × 850 mm • Rapid traverse: 60 m/min • Feed force: X/Y 5,000 N, Z 9,000 N • Spindle: • Maximum torque: 158 Nm • Front spindle bearing diameter: 70 mm • Tool clamping (drawbar force): 12 kN • Tool magazine/changer: • Tool stations (standard): 40 • Tool stations (Magnum): 80 • Max. tool diameter: 125 mm (180 mm with adjacent stations empty) • Max. tool length: 330 mm • Tool change time (approx.): 3.5 s Iodjx E Ebwspfx Af Toht • Chip-to-chip time: vertical 6.0 s / horizontal 6.5 s • Table/capacity: • Fixed table (L×W): 2,000 × 920 mm • T-slots: 6 × 18 H12 • Rotary table: 1 × 18 H8 • Max. workpiece weight: 2,500 kg • Machining capacities: • Drilling in St 52 with carbide: 40 mm • Tapping: M24 • Milling in St 52: 500 cm³/min • Distances (reference): • Z-axis travel vertical (L2): 850 mm • Spindle nose to swiveling axis (L3): 300 mm • Spindle nose to table surface (L4): 40 mm • Z-axis travel horizontal (L5): 1,000 mm • Spindle axis to table surface (L6): 210 mm • Y-axis travel (L7): 800 mm • Table center to travel start/end (L8/L9): 400 / 400 mm • Power/weights: • Total connected load: 25 kVA • Machine weight (standard): approx. 17,000–17,500 kg • Operating hours: • Operating hours: 21,100 h • Spindle hours: 7,647 h Additional Equipment • Chip conveyor • Internal coolant supply through the spindle, 40 bar • Paper band filter • Oil and emulsion mist separator • Swiveling inspection windows (2) • Cleaning guns (2) • Renishaw probing system Technical Specification: Taper size SK 40

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, MKUK 0100 TAE 015 Year of manufacture: 2001 Pressure: 6 bar Max. temperature: 35°C Ihodpfegvmrxsx Af Tet

Stanje: zelo dobro (rabljeno), Vodni hladilnik s hladilnim kompresorjem Znamka HYFRA Tip VWK 21/1 Hladilna zmogljivost 2325 W Iedpfx Afew R Sqbs Teht Moč kompresorja 0,74 kW Volumen rezervoarja 13 l Mere v mm: D/Š/V 700 500 360

Stanje: rabljeno, Cooling Unit – Coolant Recirculating Chiller ARO Type VWK 31/1-S Serial No.: Year of manufacture: 2007 Cooling capacity: 3,500 Watts Ambient temperature: max. 32°C Refrigerant: R407C Refrigerant charge: 0.98 kg Max. operating pressure (refrigeration compressor): 29.5 bar Water tank capacity: approx. 8 liters Circulating pump flow rate: 27 liters/min (1,620 liters/h) Water connections: Quick-release coupling Rectus type 26 Iodpfx Afjvw A T Ne Tsht Power supply: 230 Volt, 50 Hz, 2.2 kW - Temperature setting via DANFOSS thermostat controller - Built-in circulating pump (250 Watts) Dimensions (L x W x H): 700 x 550 x 520 mm Weight: 75 kg Good condition

Stanje: potreben popravila (rabljeno), Leto izdelave: 2001, Funkcionalnost: omejena funkcionalnost, Obdelovalni center - vertikalni IXION model BAZ 325 leto izdelave 2001 tip upravljanja Heidenhain TNC 426 X-hod 600 mm Iodexl Syqspfx Af Toht Y-hod 400 mm Z-hod 650 mm magazin orodij 12 kos površina mize 800x400 mm vpenjalni stožec SK40 območje vrtljajev vretena 40-7000 min⁻¹ teža stroja cca. 4 t Napaka na Z-osi - potreben popravilo - za dele Brez orodij, brez izsesovalca zraka Ponudbe zaželene