Vertikalni obdelovalni center

Hedelius TILTENTA 7-2600 1R Magnum

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 5 MILLING SPINDLE - Tool holder: BBT 30 (Big-Plus) - Spindle drive power: 12 kW - Spindle speed: 10,000 rpm LINEAR AXES - Travel X/Y/Z axes: 700/400/330 mm - Rapid traverse rate (X/Y/Z): 54 m/min - Feed rate (X/Y/Z): 1-30,000 mm/min TOOL CHANGER - Tool changer type: Umbrella - Number of tools in magazine: 21 TABLE - Table size: 850 x 410 mm Ljdpex Tvizjfx Al Nerk - Max. table load: 300 kg - Distance from table to spindle nose: 250–580 mm ELECTRICAL SUPPLY - Supply voltage: 380 V WEIGHT AND DIMENSIONS - Footprint: 2,165 x 2,087 mm - Machine height: 2,345 mm - Machine weight: 2,000 kg MACHINE HOURS - Operating hours: 3,207 h ACCESSORIES - CNC control: Fanuc 31i model B5 - 3-color status light ROTARY TABLE * Manufacturer: Häberle * Model: DTTiB * Travel 4th axis: 360° * Minimum resolution 4th axis: 0.001° * Travel 5th axis: -7/+100° * Minimum resolution 5th axis: 0.001° * Clamping type: Pneumatic - Coolant tank * with high-pressure pump: 15 bar - Through-spindle coolant (TSC) - Chip conveyor: rear - Tool measuring probe: Renishaw - Workpiece measuring probe: Renishaw - Electrical transformer - Machine vice - Tool holder

Stanje: rabljeno, Leto izdelave: 2018, x-Weg 620 mm y-Weg 520 mm Lrsdpfx Alsxap Eao Nek z-Weg 460 mm c-Achse 360° b-Achse -50 / +110° Abstand Spindelnase und Tisch 170 - 630 mm CNC-Steuerung iTNC 640 HEIDENHAIN Tischgröße Ø 650 mm max. Tischbelastung 500 kg Spindeldrehzahlen 12.000 U/min Antriebsleistung - Spindelmotor 15,5 / 33,0 kW Eilgang 48 m/min Werkzeugwechseleinrichtung 48 Pos. SK 40 Kühlmitteleinrichtung IKZ 30 bar Betriebsspannung 400 V Gesamtleistungsbedarf 35 kW Maschinengewicht ca. 10,0 t Raumbedarf ca. 4,00 x 2,46 x 2,85 m Späneförderer 2,90 x 0,50 x 1,30 m Kühlmittelkasten 2,30 x 1,70 x 0,45 m Kühlmittelpumpe 0,60 x 0,50 x 0,90 m Ölkühler 0,55 x 0,60 x 1,10 m 5-Achsen-Simultan-Bearbeitungszentrum - Fabrik-Nr.: 9496-117 - Steuerung EIN: 10.137 h - Spindel EIN: 3.380 h - Steuerung: HEIDENHAIN iTNC 640 - elektr. Handrad - IKZ 30 bar - Späneförderer

Stanje: dober (rabljeno), Leto izdelave: 2009, Elumatec SBZ 140 Long version: 7.6 meters Approximate weight: 5,000 kg Automatic tool changer 2-section clamping system 2 pneumatic stops Safety hood Light barriers Automatic clamp detection Central lubrication Cooling spray system Chip trolley Conditioning unit Ledpjx E Ahzsfx Al Njrk Max. spindle speed: 24,000 rpm Tool holder: HSK-63F mount, 8-position automatic tool changer. Max. milling diameter: 80 mm Max. saw blade diameter: 200 mm Compressed air: 7 bar The SBZ 140 is a 4-axis profile machining centre (axes: X, Y, Z + A). It is designed for aluminium and thin-walled steel profiles. 4-axis CNC machining centre (X/Y/Z + tilting/rotating axis A) X-axis: approx. 7,900 mm travel Y-axis: approx. 850 mm travel Z-axis: approx. 650 mm travel A-axis (rotation/tilting): Freely programmable angle, –90° to +90° Axis travel speed: X-axis up to approx. 65 m/min, Y and Z axes up to approx. 60 m/min (depending on configuration) Control: 4-axis CNC control system with PC operation, colour display, USB & network. Software: eluCam. Automatic material clamps, automatic positioning via locating pins Pendulum/shuttle operation (two work zones) improves production throughput. Besides milling and drilling, also tapping, sawing, profile machining—all with stationary clamped profiles. Please note: The information on this page has been obtained and compiled in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract, and we recommend verifying all relevant details. Financial information VAT/margin: VAT: The displayed price is exclusive of VAT (VAT deductible for businesses).

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE - Tool holder: BT40 BIG PLUS - Spindle drive power: 26 kW - Spindle speed: 15,000 rpm LINEAR AXES - Travel X/Y/Z axes: 560/640/640 mm - Rapid traverse speed (X/Y/Z): 60 m/min SWIVEL AXIS B - Travel range: 360° - Minimum increment: 0.001° TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 60 PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 400x400 mm - Number of pallets: 2 - Max. pallet load: 400 kg - Max. workpiece diameter: 630 mm - Max. workpiece height: 900 mm ELECTRICAL SUPPLY - Supply voltage: 400 V WEIGHT AND DIMENSIONS - Required floor space: 4100x2300 mm - Machine height: 2720 mm - Machine weight: 11,000 kg MACHINE HOURS - Operating hours: 3,700 h EQUIPMENT - Control: Fanuc 31 iB - Interface: Ethernet / RS232 / USB / PCMCIA - Electronic handwheel Lrjdpouhbv Sofx Al Nsk - Absolute linear measuring systems - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 25 bar * Internal coolant supply (IKZ) * With cabin washer - Chip conveyor: rear discharge - Spindle cooling - Tool measuring probe system - Workpiece measuring probe system: Renishaw OMP60

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Max. measuring dimensions X/Y/Z: 600mm/300mm/200mm. Repeatability: +/-3µm. Display error: +/-8µm. Measurement modes: program measurements / single measurements / statistical measurements. Includes various accessories. Documentation available. Lodpet H Rd Refx Al Nerk

Stanje: dober (rabljeno), Leto izdelave: 2015, potovalna razdalja osi X: 650 mm, pomik osi Y: 650 mm, pomik po osi Z: 650 mm, 1 Horizontal machining center Make: STARRAG HECKERT, Model: HEC 400D, Year: 2015 Control system: Siemens Sinumerik 840D Travel X/Y/Z = 650 x 650 x 650 mm 2-station pallet changer, pallet size: 400 x 400 mm NC rotary table 360° x 0.001° 80-position tool changer Tool holder: HSK 63 Spindle speed: 15,000 rpm Internal coolant supply (IKZ) 50 bar Lodpfxeuav H Ne Al Nerk Chip conveyor, band filter, coolant temperature control, spindle cooling Sound and control cabinets Operating hours: 43,698 Spindle hours: 5,401

Stanje: dober (rabljeno), Leto izdelave: 2007, Deli, ki so prikazane na fotografijah z roko, niso vključene. Lsdpfx Aorpn Dvol Njrk Tehnični podatki so prikazani na sliki.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.000 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, skupna višina: 3.376 mm, obremenitev mize: 2.500 kg, skupna masa: 16.300 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 33.000 W, teža orodja: 8.000 g, največja dolžina izdelka: 5.480 mm, število osi: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 positions and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table: 140 mm • Max. distance spindle nose to table: 860 mm • Work spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • Occupied adjacent pockets: 80 mm • Free adjacent pockets: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Mains frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank volume: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Fixture for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Travel motor for linear axis • Travel motor for rotary axis Lodpfx Alox Nkp Uj Nsrk • Cylinder for swiveling unit

Stanje: rabljeno, Leto izdelave: 2013, x-axis travel: 1,135 mm y-axis travel: 1,050 mm z-axis travel: 750 mm Control system: Heidenhain iTNC 530 Spindle speed range (main spindle), max: 14,000 rpm Main spindle drive power: 19 kW Max. torque: 100 Nm Tool holder: HSK-A 63 Clamping area (table): 1,400 x 1,050 mm Max. table load: 2,500 kg Max. workpiece dimensions: 1,400 x 1,240 mm Max. workpiece height: 750 mm Number of tool stations: 30 positions Tool holder: HSK-A 63 Max. tool diameter: 80 mm Max. tool diameter with adjacent pockets free: 160 mm Max. tool length: 365 / 395 mm Max. tool weight: 8.0 kg Tool change time (chip-to-chip): 6.1 sec Max. feed rate: 40,000 mm/min Rapid traverse: 40 m/min Acceleration: 6 m/s² Feed force (X / Y / Z): 14 / 20 / 14 kN Lrodsyztyaspfx Al Nek Total power consumption: 44 kVA Machine weight: approx. 14.4 t Space requirement: approx. 6.0 x 5.0 x 3.3 m CNC Vertical Machining Center DMG MORI SEIKI - DMU 105 monoBLOCK - Spindle hours: approx. 9,518h - Production package: (Chip conveyor, coolant system 600 l, paper band filter, internal coolant supply 40 bar / 23 l/min through spindle center) - Air Clear: Air curtain for viewing window

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory Lodpfxsylw Sto Al Nsrk • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40