CNC stružnica

DAINICHI DAF 35 - F35/1250

Stanje: dober (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 650 mm, premer struženja: 400 mm, Fanuc Oi-TD control 3-jaw chuck, diameter 250 mm 12-position turret Tailstock Blodpfx Ajvi Haqjiqjn Chip conveyor The machine has only 4,051 power-on hours Technical data: Swing diameter: 650 mm Turning diameter: 400 mm Turning length: 650 mm X-axis travel: 230 mm Z-axis travel: 650 mm Max. spindle speed: 4,500 rpm Number of tool stations: 12 Spindle drive power: 11/15 kW Approx. weight: 5,400 kg Technical data, accessories, and machine description are non-binding.

Stanje: rabljeno, TECHNICAL DATA - Number of Axes: 10 - Number of Spindles: 2 MAIN SPINDLE - Max. Bar Diameter: 32 mm - Travel Path: 240 mm - Spindle Speed: 8,000 rpm Bljdpouhax Eefx Aiqen - Spindle Drive Power: 7.5 kW - Minimum C-Axis Resolution: 0.1° SUB SPINDLE - Max. Bar Diameter: 32 mm - Spindle Speed: 6,000 rpm BUSH HOLDER 1 - Number of Positions: 5 BUSH HOLDER 2 - Number of Positions: 5 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm FRONT TOOL POST - Number of Positions: 4 - Number of Powered Positions: 4 - Driven Tool Speed: 6,000 rpm BACK WORKING STATION - Number of Positions: 7 - Number of Powered Positions: 3 - Driven Tool Speed: 6,000 rpm ELECTRICAL SUPPLY - Supply Voltage: 400 V MACHINE HOURS - Operating Hours: 56,433 h ACCESSORIES - Control System: Fanuc - Tool Drive Motorization at: S2, S3, S5 V+H - Driven guide bushing - Parts removal - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Number of driven tool holders: 3 - Number of fixed tool holders: 7

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Blodpfxjt Hwt Se Aiqsn Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Winch incl. Lifting capacity max. 2 t at 2.7 meters Lifting capacity max. 1 ton at 5.3 meters Operating hours: 270 h Electric: yes Bledpoq N E U Ajfx Aiqen

Stanje: rabljeno, Leto izdelave: 2009, ZOLLER GmbH Model Smile 400 Tip stroja Optični CNC-krmiljeni nastavitevni stroj za orodja / stroj za merjenje orodij PROGRAM: PILOT 3 Merilni sistem Optični kameri merilni sistem CNC-krmljeni merilni osi Samodejna nastavitev orodja Digitalno merjenje dolžine in premera orodja Merilna zmogljivost Maksimalna dolžina orodja: 400 mm Maksimalni premer orodja: 320 mm Maksimalni merilni polmer (X): 210 mm To so standardne specifikacije za platformo Smile 400. Vmesnik za orodje Opremljen z: Merilni adapter SK50 Združljiv z drugimi adapterji Zoller (HSK/SK/BT/CAPTO, odvisno od orodja). Nadzor Merilna programska oprema, ki jo nadzoruje računalnik Industrijski računalnik Windows Embedded Optični kameri merilni sistem Industrijski računalnik ZOLLER IPC Model: ZQ57 / 9G (podvozje 5G) Procesor Intel Core i3 Windows Embedded Industrijski napajalnik 80 Plus Bronze Optična enota LG DVD-RW USB-porti Monitor Industrijski monitor HP EliteDisplay Napajanje Industrijski IPC: 100–240 V AC 50–60 Hz 4–8 A Vidna dodatna oprema Glavni merilnik SK50 Blodpfxszqdpbs Aiqjn Več adapterjev za orodja Orodje za kalibracijo/nastavitev referenčnih vrednosti Industrijska tipkovnica Miška Celoten omara Merilna postaja Industrijski računalnik Konfiguracija stroja Granitna merilna osnova Navpični merilni stolpec Merilni sistem kamere Računalniška delovna postaja Optični sistem za nastavitev Področja uporabe Primerno za nastavitev: Rezalniki Ploščni rezalniki Svedri Prebojne palice Valjčni rezalniki ISO40 ISO50 SK40 SK50 Orodja HSK (z ustreznim adapterjem) Približna teža Približno 215 kg za merilno enoto (brez delovne postaje in dodatne opreme).

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 29.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, The INDEX C200 – year of manufacture 2009 – is a high-performance CNC production turning machine equipped with a FANUC 31i control, main spindle and counter spindle, and a 65 mm bar capacity. The machine features a premium three-turret configuration: Turrets 1 and 2 each offer X, Z, and Y axes, while Turret 3 is dedicated to operations on the counter spindle. All three disk turrets are fitted with 10 stations each and support driven tools up to 6,000 rpm, allowing for highly flexible complete machining operations. With a gantry loader, conveyor belt, C-axis on both main and counter spindles, and powerful spindle drives, this machine is especially suitable for productive series manufacturing of complex turned and milled parts. Control: FANUC 31i Configuration: Machine with 3 tool carriers / 3 disk turrets Bar capacity: 65 mm Machine bed: vertically arranged grey cast iron bed Main spindle: Spindle 4 Counter spindle: Spindle 5 with Z-axis Spindles Main spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Counter spindle Bar capacity: 65 mm Front bearing spindle diameter: 110 mm Spindle nose: ISO 702/1, size 140 cylindrical Chuck diameter: 160 mm Power: 25 kW at 100% duty cycle / 33 kW at 40% duty cycle Torque: 112 Nm at 100% duty cycle / 150 Nm at 40% duty cycle Speed: 5,000 rpm C-axis: Resolution 0.001° Z-axis (counter spindle): 700 mm travel Rapid traverse Z-axis: 50 m/min Tool carriers / Turrets Equipped with 3 disk turrets, each with 10 stations. Tool system for 10 stations: DIN 69880 cylindrical shank – Ø30 x 55 mm. Tool carrier 1 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 320 / 550 mm (as per documentation) Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 2 X, Z, Y axes 10 stations X-axis: 110 mm Z-axis: 550 mm Y-axis: 100 mm, ±50 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Tool carrier 3 X-axis 10 stations Dedicated exclusively for machining on the counter spindle X-axis: 180 mm Driven tools: 6.5 kW / 16 Nm / 6,000 rpm Further technical equipment as per documentation: - Gantry loader system with numerically controlled Z-axis - Workpiece unloading from main or counter spindle to conveyor belt - Remnant part removal from the main spindle into remnant container Gantry loader: Traverse speed: 100 m/min Traverse range: 70 mm Max. workpiece diameter: 90 mm Max. workpiece length: 250 mm Max. remnant length: 250 mm Max. workpiece weight: 3.5 kg Hydraulic system: Delivery rate: 19 l/min System pressure: 90 bar Hydraulic tank: 40 l Cooling circuit: Delivery rate: 19 l/min Cooling unit power: 13 kW Coolant system: Pump output: 80 l/min / 8 bar Tank capacity: 300 l Bsdjy Tmhzepfx Aiqoln Chip conveyor: Chip discharge height: 1,250 mm

Stanje: rabljeno, Technical Details: Grinding diameter: 260 mm Grinding length: 1000 mm Centre height: 130 mm Clamping length: 1000 mm Feed: manual Headstock adjustment: 280 mm, manual Total power requirement: approx. 6.0 kW Machine weight approx.: 1.5 t Machine dimensions approx. LxWxH: 2580 x 1750 x 1630 mm Bodpfxsu Ng Dto Aiqjln Non-circular grinding machine – (Crankshaft grinding machine) Intended for grinding crankshafts, camshafts, etc. Machine table: - Swivable right/left: 6° each - Clamping surface (workpiece): 1240 x 156 mm Grinding spindle stock: - Spindle stock adjustment 150 mm towards workpiece axis - Swivable right/left 90° in two planes - Manual infeed, hand-operated, 280 mm - Grinding wheel/specimen: 350 x 32 x 127 mm Internal grinding spindle type Fortuna SJ 60 x 250L Workpiece spindle stock: - Speeds: 25 - 65 - 155 - 400 rpm - Swivable manually, +/- 90° - Centre height: 130 mm Equipment: Tailstock fitted with dressing device, rapid clamping quill with centre Machine can be demonstrated on request.

Stanje: rabljeno, Leto izdelave: 1983, Vrtalna zmogljivost v jeklu (-Ø 50 mm) Iztegnjenost 1500 mm Višina obdelovanca - maks. 1380 mm Vrtalna zmogljivost v litoželezu (-Ø 60 mm) Bjdotv Iklspfx Aiqsln Razdalja od središča vretena do stebra 320 - 1250 mm Območje nihanja +/- 180° Vpenjalna površina osnovne plošče 2640 x 1000 mm Navor na vretenu 310 Nm Premer vrtalnega vretena / vpenjalni stožec 75 mm / MK 5 Hod vrtalnega vretena 310 mm Hitrosti vretena 28 - 2500 min⁻¹ Pomik: 0,05 - 2 mm/obrat Moč pogona 4 kW Teža stroja pribl. 4,3 t Potrebni prostor pribl. 3,2 x 1 x 2,75 m Kockasta miza 500 x 500 x 500 mm,

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, obratovalne ure: 3.000 h, potovalna razdalja osi X: 6.100 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 950 mm, CNC Portalna rezkalna stroj – popolnoma obnovljen s strani REM (2021) Zmogljiv in vsestransko uporaben težki rezkalni stroj, ki so ga REM-jevi strokovnjaki v letu 2021 v celoti posodobili z najnovejšo krmilno enoto Heidenhain TNC 320. Pripravljen za takojšnjo uporabo v proizvodnji. Bjdsn D N H Tepfx Aiqeln GLAVNE TEHNIČNE SPECIFIKACIJE: • X-os (prečni pomik): 6.000 mm • Y-os (vertikalni pomik glave): 2.000 mm • Z-os (osni pomik sani): 950 mm • Dvojna vretena | Rotacija glave: 360° • Hitrost vretena: 1.000 – 4.000 min⁻¹ • Konus vretena: ISO 50 (samodejno zaklepanje/odklepanje) • Dimenzije glave: 290 × 290 mm • Moč motorja vretena: 15 kW (DC) • Teža stroja: pribl. 32 t • CNC krmilje: Heidenhain TNC 320 ZAKAJ IZBRATI REM? ✔ Stroj v celoti pregledan in preizkušen v delovnem stanju ✔ Sodobna CNC nadgradnja – nova električna napeljava, novi pogoni ✔ Na voljo dokumentacija in tehnična podpora ✔ Izvoz po vsem svetu | Konkurenčne cene pošiljanja Idealno za obdelavo težkih komponent v letalski, energetski in težki industriji. Kontaktirajte nas za popolne tehnične podatke, fotografije in video predstavitev.

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Blodpjh Nypfsfx Aiqsn