PREMER 350 MM - POVSEM AVTOMATSKO RAVNO REZANJE

CRONOSSTECH CRONOSS 350

Stanje: rabljeno, Stroj za valjanje navojev ORT RP30U 2-valjna 30 ton Zasukljive glave Inverter #1331 Stroj si lahko ogledate v delovanju v našem skladišču v Gussago BS. Možnost demonstracije M i m u Stroji za valjanje navojev so mehanski postopki brez odrezavanja, ki se lahko izvajajo hladno ali vroče, z namenom izboljšanja površinske kakovosti (torej tudi izboljšanja utrujenostnih lastnosti). Moč (tona): 30 Število valjev: 2 Iaedpfxjt H Ty Ue Aa Ujr

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Iajdpfxet Hw N Tj Aa Usr Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: dober (rabljeno), moč: 30 kW (40,79 KM), Leto izdelave: 2010, obratovalne ure: 51.548 h, temperatura okolja (min.): 3 °C, okoljska temperatura (maks.): 45 °C, tlak (maks.): 8 letvica, največja hitrost vrtenja: 2.945 obr/min, številka stroja/vozila: 100609.1, Oprema: Na voljo je tipska ploščica, The Kaeser ASD 57 is an energy-efficient screw compressor designed to provide reliable compressed air supply for industrial applications, characterized by its compact design and quiet operation. Featuring advanced Sigma Profile technology and intelligent control, it delivers optimal performance and durability. Technical details: Article number: 100609.1 Iedpfx Ast Iwyusa Uoar Serial number: 1941 Year of manufacture: 2010 Rated power: approx. 30 kW Maximum operating overpressure: 8 bar Motor speed: 2,945 rpm Condition: used (see pictures and nameplate)

Stanje: dober (rabljeno), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, Machine Type: Amada - Schubert High Performance Saw, used Manufacturer: AMADA - Schubert Model: CMB-100 CNC / TRB-SAV Year of Manufacture: 2019 With thin-kerf blade technology in standard version, fully automatic Cutting range: 25-101 mm Feed rate (blade): 0-30 mm/sec Saw blade: 360 x 40 x 2.5 mm Cutting speed: 56-210 min⁻¹ Weight: 2800 kg Further technical details available on request Heavy-Duty Material Feed System For automatic separation of round and square material from 30 - 100 (140) mm diameter and up to 8 m in length Short Description: Our feed systems are designed especially for low maintenance and robust operation. They are primarily used in heavy-duty sectors and forging shops. 1 pc SAV 140/8 V-type conveyor, standard version, for handling bars up to 8 m in length. Manufacturer: Schubert General Specification: Ijdeuv Hlkepfx Aa Usar Dimensions (L/W/H): 6500 mm / 1500 mm / 1500 mm Load capacity: approx. 5 tons Transfer height: variable Number of supports: 4 pcs, spaced approx. 1600 mm apart Drive: 2.2 kW gear motor with brake + slip clutch

Stanje: rabljeno, TECHNICAL DATA - Max. capacity: 40 [t] - Max. workpiece diameter: 40 [mm] Iajdpfx Aasuhb Uhs Uor - Spindle diameter: 80 [mm] - Spindle length: 120 [mm] - Max. tool diameter: 250 [mm] - Dimensions (L x W x H): 2400 x 2100 x 2200 [mm] - Weight: 7100 [kg] EQUIPMENT - CNC control (Siemens-based) - Tailstock device - Coolant tank with pump - 2 boring wheels 80, diameter: 260 [mm]

Stanje: rabljeno, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of Manufacture: 2007 Rolling Force: max. 24 tons Tool Diameter: max. 270 mm Roll Spindle Diameter: 69.85 mm Tool Bore Diameter: 70 mm (nominal diameter) Mounting Length, Tool Length: max. 180 mm Workpiece Diameter: max. 50 mm Hydraulic Motor Power: 3 kW Roll Drive Motor Power: approx. 5.5 kW Mains Connection: 400 Volt, 50 Hz, 10 kW - Pivoting roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gear shift - Hydraulic system integrated in machine frame - Operating manual with electrical diagram Ijdpfx Aaouz If Ns Ujar Space requirements (L x W x H): 2000 x 1450 x 190 mm Weight: approx. 3 tons Very good condition Plunge rolling: The thread rolling dies, with the same pitch as the workpiece, form the thread by pressing into the workpiece up to the nominal diameter. The thread length is at most as long as the width of the rolling dies. Through-feed rolling: Used when the thread length exceeds the width of the rolling dies. Through-feed dies have three functional zones – lead-in, calibration, and lead-out. Knurling Rolls: These rolls have no pitch and are swiveled at the pitch angle of the profile to be rolled. Pitch Rolls: Pitch rolls have a profile with a pitch, differing from knurling rolls. The sum of the pitch angle and swivel angle determines the pitch angle in the finished workpiece.

Stanje: rabljeno, Thread rolling machine - ORT RP18 2-roll thread rolling machine Swiveling spindle Overhauled with Siemens PLC See video Iaedeuua H Ropfx Aa Uor The machine is powered and available in our warehouse Test run possible

Stanje: kot nova (razstavni stroj), Leto izdelave: 2024, številka stroja/vozila: MA0139_1335, Exhibition unit available immediately: New Kaeser Aircenter SK 22 - 8 bar screw compressor with integrated refrigeration dryer and air receiver tank Sigma Control 2 controller Iaedpfx Aaohwwyrj Usr Year of manufacture: 2024 Operating hours: 1 h Pressure: 8 bar Rated power: 11 kW Free air delivery at 7.5 bar: 2.00 m³/min Sound level: 66 dB(A) Compressed air outlet: 1" Air receiver tank volume: 350 litres Refrigeration dryer pressure dew point: +3°C Electronically controlled condensate drain: ECO DRAIN Dimensions (L x W x H): 750 x 1335 x 1880 mm Weight: 579 kg Attractive lease financing for new machines available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock!

Stanje: rabljeno, Leto izdelave: 1988, Technical details: Pressing force: 10 t Maximum workpiece diameter: 40 mm Thread length: 70–80 mm Workpiece diameter min/max: 3 / 40 mm Rotational speed: 47–94 rpm Feed rate: 0.5 – 6 mm/s Stroke: max. 7 mm Total power requirement: 4.68 kW Machine weight approx.: 1.4 t Machine dimensions (W x D x H): 1.4 x 1.4 x 1.7 m Hydraulics dimensions: 0.8 x 1.2 m Hydraulic drive Manual and automatic cycle Iajdew D Aq Topfx Aa Ujr Adjustable roller speed Maximum thread diameter: 40 mm; Minimum thread diameter: 3 mm Up to max. pitch: 3.5 mm; Max. pitch: 1.75 mm Roll width min.: 80 mm; max.: 120 mm Spindle speed: 47–94 rpm Roller spindle diameter: 40 mm Various rollers as accessories

Stanje: novo, Leto izdelave: 2023, 660 x 2300 mm, 104 mm spindle bore EVS variable spindle speed Coolant system 2 pieces MT5 centers Standard machine tools Manual and spare parts list 3-jaw 12" SK-type chuck 2-axis FAGOR digital readout Iaedpfjptabajx Aa Uor Quick-change tool post