POPOLNOMA AVTOMATSKA ŽAGA S PREMEROM 350MM

CRONOSSTECH CRONOSS 350

Stanje: novo, Leto izdelave: 2025, največja širina rezanja: 700 mm, največja višina reza: 350 mm, trajanje garancije: 12 meseci, moč: 4 kW (5,44 KM), STANDARD FEATURES · HYDRAULIC VICE · VARIABLE SPEED CONTROL (INVERTER) · SAFETY SWITCHES · HYDRO-MECHANICAL BLADE TENSIONING · VARIABLE ANGLE CUTTING FROM 0 TO 60 DEGREES (ROTARY HUB) · ANGLE SCALE · ADJUSTABLE HEAD DESCENT SYSTEM · 1 SAW BLADE · 2 MATERIAL SUPPORT STANDS · 24-MONTH MECHANICAL, 12-MONTH ELECTRICAL WARRANTY · COUNTRY OF ORIGIN: TURKEY · MODELS MANUFACTURED WITH 220 MM TO 3000 MM DIAMETER CAPACITY TECHNICAL SPECIFICATIONS MODEL: 350 YDG Capacity at 90° (mm): Round: 350 mm Square: 350 x 350 mm Rectangle: 350 x 700 mm Capacity at 60° (mm): Round: 200 mm Square: 170 x 170 mm Rectangle: 140 x 230 mm Capacity at 45° (mm): Round: 350 mm Djdpfx Afjvva Tqjqjcr Square: 300 x 300 mm Rectangle: 330 x 250 mm Main Motor / Torque: 4 kW Hydraulic Motor: 0.37 kW Coolant Motor: 0.09 kW Blade Size: 41 x 1.3 x 5170 mm Material Feeding Height: 811 mm Vice Maximum Opening: 700 mm Vice Maximum Closing: 0 mm Roller Table Width: 820 mm Height - Width - Length: 2000 x 2780 x 2452 mm Weight: 1,750 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Pipe Ø: 25 – 60 mm Dcedpfeuc Shuox Afqer Wall thickness: 1 - 4 mm Coil Ø: max. 3,000 mm Coil weight: max. 10 t Finished pipe length: 3,600 - 8,500 mm Round pipe Ø: 26/28/30/32/36/38/40/44/46/48/52/54/56/60 mm Speed: max. 100 m/min Working direction: left → right Line Composition: Uncoiler End shear Welding table Edge trimming shear with scrap chopper Scrap conveyor Strip edge preparation Entry table Forming unit Inner/outer scraper Cooling section Sizing section Testing unit and length measurement Cutting to length Ejecting station for defective pipes Blow-out station Oiling station Bundling station Strapping station Bundle removal Electrics

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. Dcedpfx Afjfg E Hpsqor - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: novo, Length 2000 mm Width 700 mm Working height 900 mm Space requirement approx. 2.0 x 0.7 x 0.9 m Workbench – Made in Germany Industrial quality, particularly robust and durable construction for the highest demands! Dcedpjgvqznefx Afqer Workbench top: 45 mm thick, high-quality multiplex beech Drawers: 3 units on the left Right: 1 drawer with 1 large compartment Center: open compartment Paint finish: RAL 5010 blue, RAL 6011 green, RAL 7016 anthracite grey

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m Dcsdpfjfg E Hlox Afqor SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, MEP SHARK 230-1 NC HS 5.0 Twin-Column Metal Band Saw Article no. SH230-1NCHS Motor power: 2.2 kW Vise opening: 235 mm Blade size: 2950x27x0.9 mm Weight: 1,000 kg Cutting speed: 15 - 100 m/min, stepless Cutting capacity at 0°: 230 / 230x230 mm Cutting capacity at 45° right: Cutting capacity at 45° left: Cutting capacity at 60° right: Cutting capacity at 60° left: Dsdpfxjchhfue Afqocr Description: SHARK 230-1 NC 5.0, electrohydraulic twin-column fully automatic band saw with semi-automatic and fully automatic operation mode. Max. end piece length: 70 mm. Bundle cutting: 230 x 230 mm. Numerically controlled saw equipped with the new MEP 50 Windows-based controller. Material feed via stepper motor and ball screw, mounted on opposing ball bearings. Single stroke 500 mm – repeatable for any cutting length. Easy programming – simply enter cut length and quantity, then press "START". Electronic blade tension control. Automatic monitoring of cutting load via a servo valve mounted directly on the cylinder. Blade rotation monitoring with instant stop in the event of a jammed saw blade.

Stanje: rabljeno, Leto izdelave: 2010, Technical Details: Measuring range X-axis: 280 mm Measuring range Y-axis: 300 mm Tool holder: SK 40 Tool holder: rotatable 360° Compressed air: required, bar Power supply: 220 V Weight: approx. 70 kg Dimensions (LxWxH): 900 x 475 x 820 mm Application for rotary tools Measuring method: optical / point and line measurement (line, angle, radius, plumb, with center point and concentricity) Measuring beam adjustable via handwheel, X-axis = 140 mm and Z-axis = 300 mm, transmitted light LED illumination Color camera type HS-CAM 6, working distance 100 mm, outreach 55 mm Image processing system type TCAM3, fixed/floating crosshairs, via 12.1" screen, memory for 1000 tools Table support Ø 90 mm, outreach max. 225 mm, manually rotatable 360°, tool holder SK50:SK40 (see photo) Djdeva Atnspfx Afqocr Accessories: Power supply 12 V adapter 4x USB interfaces (label printer with power supply not connected) Tool holder SK50:HSK A63

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 5164, Offer 23148 Technical specifications: - Equipped with hydraulic clamping and feed device - Cutting range: - Round: 320 mm - Square: 300 x 300 mm - Max. cut-off length per single stroke: up to 400 mm - Multiple feed up to 10 x 400 mm - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speed infinitely variable: 20 – 100 rpm - Feed rate hydraulically adjustable, stepless - Coolant system - Material support height: 720 mm Dcodpfxoq Evn Es Afqer - Saw drive: 400 V / 2.5 kW - Installation dimensions (approx.): W 1950 x H 1250 x D 1500 mm - Weight (approx.): 1000 kg

Leto izdelave: 2015, Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Linija za vzdolžno rezanje in rezanje na dolžino za jeklo in aluminij – proizvajalec Barović Srbija Odmotovalec: 12.000 kg Maksimalna širina koluta: 1.550 mm Notranji premer koluta: od 480 mm do 620 mm Postaja za lepljenje PVC folije. Rezanje na dolžino – delovna hitrost med 20–50 m/min: Valji za ravnanje jekla: 5+4 kos Maksimalna širina: 1.550 mm Debelina pločevine: 0,3 do 3,0 mm Natančnost dolžine: +/- 0,5 mm Električne škarje za poravnano pločevino: maks. debelina 3 mm Pnevmatsko-hidravlična sprejemna miza z delovnimi merami 1.550 x 3.000 mm Vzdolžno rezanje – delovna hitrost cca 20 m/min: Trakovi: od 32 mm do 1.550 mm Maksimalna širina: 1.550 mm Debelina pločevine: 0,3 do 3,0 mm Električne škarje za trakove: maks. debelina 3 mm Končni navijalec: 10.000 kg Maksimalna širina koluta: 1.550 mm Djdpfx Aexb Twcofqscr Notranji premer koluta: 508 mm

Stanje: novo, Cutting diameter round: 355 mm Cutting diameter square: 350 x 350 mm Saw band dimensions: 4640 x 34 x 1.1 mm Band speed: 15 - 115 m/min Total power requirement: 5.5 kW Machine weight: approx. 2.8 t Dimensions (L x W x H): 3.2 x 2.2 x 2.7 m Automatic electromechanical bandsaw machine in double-column design for 0° cuts on solid material and profiles made of steel, stainless steel, and steel alloys up to max. 350 x 350 mm. Standard equipment includes: • Powered chip conveyor, mountable to the right or left side of the machine • Clamping pressure regulation for the vices • Material feeder with vertical rollers for lateral material support • Sensors for material start detection • Clamping pressure adjustment Dsdpfefm T Hbex Afqecr • Storage for up to 300 programs • The machine is available with either 34 mm or 41 mm blade at no extra charge Price on request.