COSTA serija K - 1350

COSTA CCTT + CCTT 1350

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Prodajam širokopasovni brusilni stroj COSTA S CCTT 1350, letnik 2004. Konfiguracija: 1 kos jekleni kalibracijski valj 1 kos brusni valj iz trde gume 2 kosa elektronski segmentni čevelj Bsdpfovxd Ttox Acysdd Kombinirana čistilna enota: krtača + pihanje od zadaj Delovna širina: 1350 mm Jekleni pritisni vodili za kratke elemente Čiščenje s stisnjenim zrakom za vse enote Vakuumska miza z integriranim ventilatorjem Konstrukcija za linijo, s stabilno delovno višino in premičnimi agregati 4 motorji, skupna moč 96 kW Stanje zelo dobro! Na voljo takoj.

Stanje: zelo dobro (rabljeno), WEINIG Hydromat H23 Line, S/N 87321, year 1999, Ref-No. 103437 WEINIG transverse conveyor HighMech E-1, with 6 flat chains approx. 2000 x 3500 mm Hydraulic WEINIG accelerator model 814 Short infeed table with heavy-duty 4-roller feed Planing moulder with reinforced KASCHWIG three-sided soundproof cabin • Maximum working width: 230 mm • Maximum working height: 160 mm • Electronic feed, frequency-controlled, 8 – 80 m/min • Feed motor: 18.5 kW • 1st spindle bottom: 11.0 kW • 2nd spindle right: 11.0 kW • 3rd spindle left: 11.0 kW • 4th spindle right: 11.0 kW • 5th spindle left: 11.0 kW • 6th spindle top: 15.0 kW • 7th spindle bottom: 11.0 kW • 8th spindle top: 15.0 kW • 9th spindle bottom: 15.0 kW • 10th spindle universal: 11.0 kW (4-sided) • Spindle speed: 6,000 rpm Bodpfewvqklox Acyedd • Spindle diameter: ø 50 mm • All spindle motors equipped with NEW motor start/stop combination • Pneumatically assisted top pressure rollers • Feed rollers D=140 mm • 6 driven rollers in the table • Spindles 1 + 6 + 7 + 8 + 9 with counter bearings • Spindles 8 + 9 with straight jointer • Spindles 8 + 9 with profile jointer • Spindles 6 + 8 with pneumatic pressure • Reduced feed roller spacing • Hard-chromed table plates • Hard-chromed fences • Pneumatically assisted lateral pressure rollers • Automatic table lubrication • Centralized lubrication points • Free-standing control panel • Total connected load approx. 145 kW / approx. 400 A • Free-standing switch cabinet • Operating manual, spare parts list, and circuit diagram included • Machine without planing heads Machine dimensions approx.: • Length: 6,000 mm • Width: 2,250 mm • Height: 1,800 mm • Weight: approx. 8,500 KG Factory-new WEINIG parts used: NEW horizontal / vertical spindle NEW counter bearings All spindles with HL bearings All motors newly mounted NEW electronic motor soft start / braking units NEW hard-chromed table plates NEW hard-chromed fences Many other NEW PARTS installed in the machine Condition: see attached photos – technically in top condition Infeed mechanization unrefurbished – all parts present – operational Payment: Prior to loading, net cash Delivery time: By arrangement Delivery: EXW Inspection: Anytime by appointment Subject to prior sale and errors excepted.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, premer valja: 80 mm, skupna širina: 1.250 mm, skupna dolžina: 40.750 mm, transportna dolžina: 40.750 mm, moč: 1,1 kW (1,50 KM), razmak med vrstami: 160 mm, razmak osovin: 160 mm, višina okvirja: 185 mm, širina okvirja: 85 mm, Pallet Roller Conveyor / Roller Conveyor / Pallet Conveyor Technology Manufacturer: Claus Maschinenbau Condition: Used Drive Type: Chain Drive The system consists of 9 segments: 6 x approx. 5.75 m length 1 x approx. 5.30 m length 1 x approx. 2.00 m length 1 x approx. 0.95 m length Each element is equipped with its own motor. Total length: approx. 40.75 m Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roller diameter: approx. 80 mm Axles / Axle spacing: approx. 160 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: Blue Including pallet guide Including SEW drive motor (1.1 kW) Including height-adjustable feet The conveyor system was operational until dismantling. Bedotrv Anopfx Acyodd Condition: fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, incline conveyors or telescopes for loading and unloading your goods, we are your competent partner! We are happy to provide you with an individual quotation or advise you on design or assembly questions. Simply let us know your requirements and the site conditions. Benefit from our many years of experience and our excellent network of experts. We have already successfully implemented projects for companies in various sectors, such as logistics, the pharmaceutical industry, trade, or the electronics sector. Together, we will develop solutions to optimize your processes and material flow cost-effectively and sustainably. We can even offer you fully automated sorting technology or supplementary components such as order picking racks or containers.

Stanje: zelo dobro (rabljeno), Self-loading press for laminated boards Orma LS/ECO/CA 30/13 Working length: 3000 mm Working width: 1300 mm Automatic material loading Glue application system Shelves heated with oil up to 130°C Upper pressing force: 57 t Bdodjv Nhx Uspfx Acyed Side pressing force: 9 t Year of manufacture: 2001 CE certificate

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Bedpfx Acjqabm Eeyedd Price negotiable!

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Naprodaj: prečna lepilka za furnir Fisher+Rueckle FZR-24, letnik 2013! Dolžina traku furnirja: 400–1100 mm (dvojna linija) / 350–2100 mm (enojna linija). Širina traku: 50–500 mm. Debelina traku: 0,3–1,5 mm. Največji nazivni izhod/cikli stroja: 30 ciklov/min. Povprečna hitrost proizvodnje: 17–20 ciklov/min. Učinkovita dolžina grelne cone: 2478 mm. Priključna moč: 22 kW. Komprimiran zrak: 6 bar. Vrste lepila: na osnovi PVA ali UREE. Bodpfjumrf Aox Acyjdd

Stanje: novo, Leto izdelave: 2024, Working width: 600 mm Working height: 150 mm Units: 4 brush units, individually adjustable 1st unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 2nd unit, rotor group: Group of 5 oscillating rotary brushes, Ø 115 mm, each with 3 kW motor 3rd unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive 4th unit, brush: Scotch Brite Hard / diameter 220 mm, variable-speed drive Height adjustment: electric Height display: digital Control system: touchscreen Feed speed: 4 - 12 m/min Feed motor power: 0.37 kW Machine length: Bdedeug Ty Hopfx Acyed Machine width: Weight:

Stanje: kot nova (razstavni stroj), Demonstracijska naprava s 7 delovnimi urami na voljo takoj (iz tovarne Neckartailfingen) Šreder MRZ 830 Carinska tarifna številka: 84659600 Vhodna odprtina 800x1000 mm Motor: 18,5/22 kW; 400 V - 50 Hz - 3 faze Noži: večkrat vrtljivi Hidravlično gnani pomik Velikost mreže po izboru (10 - 40 mm) Teža cca 1.600 kg Dimenzije (d x š x v) cca 2290 x 1420 x 1750 mm Turbo sklopka Serijska oprema vključuje: - avtomatski zvezda/trikot zagon - hitra hidravlika - avtomatski izklop pri prostem teku rotorja - Hitrost 70-90 obr/min za visoko zmogljivost pretoka - Intervalno krmiljenje za preprečevanje prostega teka - Učinkovito krmiljenje gibanja hidravličnega pomika - Vodila iz pertinaksa za hidravlični pomik - Vibracijsko dušeča podporna stopala - V skladu s CE . Razrezovalnik je zasnovan za drobljenje neobdelanega lesa, ivernih in MDF plošč ter drugih materialov po testiranju in odobritvi proizvajalca . Vključeno: - Dvig šrederja za 30 cm (priprava za transportni trak) Dodatne možnosti šrederja: - Kotni transportni trak + 8.770 € netto Horizontalni del: 1200 mm Naraščajoči del: 2500 mm Kot: nastavljiv 0-60 stopinj Izhodna višina: cca 2000 mm +/- 100 mm - Nadtrakovni magnet + 6.780 € netto - Krmiljenje transportnega traku in nadtrakovnega magneta + 2.750 € netto (Zagon in zaustavitev vedno sinhronizirana z drobilcem) Bjdpfxjv Sqrpe Acyedd . Zahteve za vhodni material: - Vsebnost vlage (atro) mora biti pod 30 % - Kovina in mineralne nečistoče kot so pesek, kamenje itd. povzročajo večjo obrabo

Leto izdelave: 1980, stanje: dober (rabljeno), Stellite Tipping Machine VOLLMER GF10U Blade thickness: 1 to 4 mm Bodpfxegxb Ebj Acyjdd Band saw blade width: 60 to 420 mm Circular saw blades: 300 to 1,200 mm diameter Electric feed drive via geared motor

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Bodpfot Hw Shox Acyodd Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice