Umerjanje stroja in brušenje COSTA SK

COSTA LEVIGATRICI SK 5 CC 1350

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, obratovalne ure: 990 h, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: trifazni, skupna višina: 3.900 mm, vhodni tok: 63 A, skupna dolžina: 9.500 mm, skupna širina: 4.500 mm, moč: 15 kW (20,39 KM), Oprema: dokumentacija / priročnik, Pelletizing plant for a wide range of materials, such as wood, Miscanthus, agricultural by-products and waste products (hay, straw, corn stalks, etc.), and feed. This is a complete plant built on a base frame and consisting of the following components: - Raw material storage bin, 4m³, including agitator. This has been expanded by approx. 3–4m³ using wooden panels. - Intermediate auger to the hammer mill - Hammer mill (11 kW) for processing wood chips or other materials - Inclined mixer for material homogenization including moisture measurement, dosing, and level control Bcjdpfxjxv Dkcs Ag Tow - Dosing container for pressing aids, feeds into inclined mixer - Dosing screw conveyor for optimal material feed to the press (speed-controlled) - Press, 15 kW, including full indicator, temperature monitoring, and discharge chute - Conveyor belt to the dedusting screen - Dedusting screen with material outlet at 3 m height The system is designed for easy extension with a second press, each 15 kW. The entire plant is centrally operated via Siemens PLC with touch display. All parameters are monitored to ensure the press is safely shut down in case of faults. Remote maintenance allows operation and monitoring of the press from any PC. The chip dryer, shown on photo 2 mounted on the wall with discharge and control unit, is also for sale. Please contact us for further details.

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, širina skobljanja: 2.050 mm, vrsta nastavitve višine: pnevmatičen, višina skobljanja: 300 mm, 4-sided planer, working width: 2200 mm Bodpsw A A Ebefx Ag Tecw mounted on a rotary table for curved workpieces machine is enclosed

Stanje: dober (rabljeno), Leto izdelave: 1999, Briketirni stroj tip GP 120 Tandem Briketirni stroj za briketiranje ostružkov, sekancev in prahu vklj. z avtomatskim senzorjem za zaznavanje nivoja polnjenja - Premer briketa: 60 mm - Tlačna zmogljivost: 40–120 kg/h * 2 = 80–240 kg/h (odvisno od materiala) - Odpiranje lijaka: pribl. 1.900 x 1.900 mm - Višina lijaka: pribl. 1.800 mm - Prostornina lijaka: pribl. 6,0 m³ - Pogonska moč: 7,5 kW, 400 V, 50 Hz - Krmilna omara: prisotna na obeh straneh - Obratovalne ure: 13.725 h oz. 13.005 h - Hidravlična enota: pribl. 300 l rezervoar za hidravlično olje - Teža: pribl. 1.100 kg * 2 = 2.200 kg Rabljeni briketirni stroj v dobrem stanju Bedpfx Agoupwx Hs Tecw Valj W-zvijače, klešče (RB 120 ojačane), priključna prirobnica klešč na eni strani obnovljena (levo v smeri transporta) briketiranje | stroj za briketiranje | briketirni stroj | briketirni stroji | briketiranje

Stanje: rabljeno, Deburring and Fine Grinding Machine for Sheets / Flat Material, New The compact machining center for deburring, slag removal, descaling, oxide layer removal, edge rounding, fine grinding, and polishing of metal surfaces. This machine is suitable for heavy-duty applications. Thanks to its fixed working height, the machine can be seamlessly integrated into a production line and is suitable for processing large workpieces. Bcjdpfx Agjnah Taj Tjw Working width: 650 – 1650 mm Maximum workpiece weight: 2000 kg Wide belt with sanding belt length: 3250 mm Comes standard with a vacuum holding system; optionally available with a magnetic holding system. By using sanding belts with a length of 3250 mm, you achieve an even, smooth surface and reduce consumable costs, as these belts have a longer service life. The modular design of the system allows us to offer the optimal configuration for the customer’s machining requirements. The machine frame can accommodate up to 5 internal processing units and 2 additional external processing units. The high rigidity of the machine structure and feed table, combined with advanced mechanics and electronics, make this series a universal machining center for deburring and finishing. Please contact us for more information and images via email (at) or

Stanje: novo, Technical data: Working width: 1100 mm Abrasive belt size: 1120 x 2150 mm Max working height: 160 mm Calibrating steel roller diameter: 150 mm Rubber roller diameter: 150 mm Sanding shoe width: 50 mm Total motor power for both sanding units: 11 kW Abrasive belt speed: 16/18 m/s Bodpjgtm U Aefx Ag Tscw Feed motor power: 0.55 kW Infinitely variable feed belt speed: 4–20 m/min Work table motor power: 0.25 kW Pneumatic shoe lift/drop: YES

Leto izdelave: 1997, Stanje: dober (rabljeno), • Working width (mm): 1300 • CSD system • Cross sanding unit • Longitudinal sanding unit - shoe type • Brushing unit • Ionisation Bjdpfxjidi Ive Ag Tecw

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Bcjdpfxod Ixadj Ag Tjw The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: kot nova (razstavni stroj), DEMONSTRATION MACHINE For sale is an as-new Record Power PT310 planer thicknesser with a planing width of 310 mm. The machine is in its original condition, therefore you get the full warranty. Technical data: - Motor power: 3 HP / 230 V connection - Planer table length: 1,407 mm - Planing width: 310 mm - Cutterhead diameter: 70 mm - Cutterhead equipped with 3 knives Bcedpfx Asviu S Uog Tow - Maximum cutting depth: 3 mm - Feed speed: 7 m/min - Weight: 202 kg Shipping by freight forwarding: Austria: €80.00 incl. VAT Germany: €100.00 incl. VAT South Tyrol: €120.00 incl. VAT The planer thicknesser is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: surface planer, thickness planer, planer, planing, thicknessing Reference: ZXPT310-A

Stanje: zelo dobro (rabljeno), 3-axis (X-Y-Z) CNC MACHINING CENTER – Gantry design Moving horizontal table (workpiece), stationary machining head Control system (BiesseWorks software), with separate electrical control cabinet Machining head safety enclosure, safety tread mats Infeed table (workpiece support) at entry side No. 2 pneumatic workpiece clamping cylinders within the working area Outfeed table (with conveyor belt) Bodpfowb Alljx Ag Tjcw Minimum workpiece dimensions (X-Y-Z) mm: 90 x 70 x 8 (approx.) Maximum workpiece dimensions (X-Y-Z) mm: 3000 x 1300 x 60 (approx.) Total connected load (kW): 24 WORKING UNITS (TOP): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW) WORKING UNITS (BOTTOM): Independent vertical drilling spindles: No. 29 Independent horizontal drilling spindles: No. 10 (8 X + 2 Y) Grooving saw unit (for X-axis machining) with a diameter of 160 mm (No. 1 x ~3.5 kW) Vertical main spindle (milling unit) ISO 30 (No. 1 x ~4.5 kW)

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Bsdpforigxyex Ag Tecw Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Machine tested, in original condition