Rezkalni in vrtalni stroj

CORMAK ZX7045E 230V

Leto izdelave: 1977, stanje: rabljeno, Weiler Matador VS2 lathe, year of manufacture approx. 1977, equipped with collets, collet tube, 3-jaw chuck, and Multifix toolpost. The guideways in the front section show wear. The machine is in ready-to-use condition and can be demonstrated under power by arrangement. Dkedpfx Ahomdn Dxj Soi

Stanje: rabljeno, Column Drilling Machine ALZMETALL Type AB 4 SV Machine No. 14805 Year of manufacture: approx. 1980 Drilling capacity: 40 mm Spindle mount: MK 4 - short quill Throat depth: 340 mm Quill travel: 180 mm Table size: 710 x 560 mm Column diameter: 160 mm Spindle speed: 30 - 765 rpm, stepless Motor power: 2.3 and 3.4 kW, pole-changing Djdpfon N Ekcjx Ah Soki Power connection: 380 Volt, 50 Hz - Spindle speed selectable via 2 motor speeds and stepless adjustment through variator gearbox - Intermediate gearing with 2 gear stages for high torque at low speeds - Spindle on/off via rotary switch or electric foot switch - Automatic feed: 0.1 - 0.2 - 0.3 mm/rev - Table height adjustment via hand crank - Machine base with machined workpiece support surface - LED lighting system Required space (L x W x H): 1200 x 725 x 2050 mm Weight: 615 kg Good condition

Stanje: rabljeno, Leto izdelave: 1974, premer struženja nad ležiščem sani: 480 mm, širina na sredini: 1.500 mm, Lead and Feed Screw Lathe Manufacturer: Heidenreich & Harbeck Dkjdpfx Ajwm D Ileh Soi Model: Hanseat 480 Completely overhauled in 2012 Technical data Make: Heidenreich & Harbeck Model: Hanseat 480 Year of manufacture: 1974, completely overhauled in 2012 Control: conventional Centre distance: 1500 mm Swing diameter over bed: 480 mm Swing diameter over cross slide: 295 mm Spindle speed range: 20 – 2190 rpm Dimensions (LxWxH): 3.50 x 1.20 x 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250 mm, mounted - Faceplate D 400 mm - 10 quick-change tool holders - 1 steady rest All information without guarantee. A demonstration under power is possible at any time in our showroom.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Turning length: 6000 mm, swing diameter over bed/support: 820 mm/515 mm, spindle bore: 128 mm, spindle speed: 1600 rpm, spindle power: 46 kW, center height: 400 mm, bed width: 560 mm, tailstock quill diameter: 125 mm, quill stroke: 280 mm, connected load: 62 kW. Machine dimensions (X/Y/Z): approx. 6500 mm / 2500 mm / 2300 mm, control system: Heidenhain, operating hours: approx. 9000 h. Includes accessories such as a steady rest. Documentation is available. On-site inspection is possible. Dkodpfxevwcwuj Ah Soi

Stanje: rabljeno, Leto izdelave: 1990, Technical details: X travel: 185 mm Y travel: 95 mm Z travel: 200 mm Control: emco tronic TM02 Spindle mount: SK 30 Speed range: 10 - 4000 rpm, stepless Feed rate stepless: 1 - 2000 mm/min Rapid traverse: approx. 3.0 m/min Tool turret - number of stations: 10 Interface: R 232 Table size: approx. 420 x 125 mm Total power requirement: 0.8 kW Machine dimensions (LxWxH): 2.1 x 0.9 x 2.0 m Djdjvc Awrspfx Ah Sski Control panel: EMCOTRONIC TM 02 Operating modes: Manual operation and/or automatic Coolant system (with supply to the milling spindle) Operation via control panel mounted on 3 swiveling wheels Pneumatic door guard

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe Djdpfx Aetzf N Rjh Seki - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Stanje: novo, WMD45 - ROGI Drilling and Milling Machine Drilling capacity ----- 45 mm Face milling capacity ----- 80 mm End milling capacity ----- 32 mm Worktable dimensions ----- 800 x 240 mm T-slot size ----- 14 mm Spindle taper ----- ISO30 Maximum distance spindle - table ----- 460 mm Spindle travel ----- 120 mm Head tiltable ----- Left / Right 90 Degrees Table longitudinal travel ----- 560 mm Table cross travel ----- 230 mm Speed range ----- 75 - 3200 rpm Weight ----- 350 KG Motor ----- 1.1 KW Voltage ----- 400V-3Ph INCLUDES * Drill chuck with shank ISO30 - B16 * Forward/Reverse switch * Spindle guard * Fine adjustment Dkedpfsga T Anox Ah Ssi * 2-speed motor * Drift key * Tapping function * Digital depth stop * CE plug OPTIONS * Base cabinet * Milling vice * ISO30 tool holder + 12 collets in case * Milling cutter set

Stanje: dober (rabljeno), Leto izdelave: 1990, številka stroja/vozila: 328501, Ponudba 25366 Tehnični podatki: - Sposobnost vrtanja: 25 mm - Vpenjanje vretena: MK 3 - Hitrosti vrtalnega vretena: 100 / 205 / 345 / 440 min⁻¹, 695 / 885 / 1450 / 2900 min⁻¹ - Hoz vrtalnega vretena: 130 mm - Iztegnitev vrtalnega vretena: 260 mm Djdpfoxu U Susx Ah Seki - Koordinatna miza s 3 T-utorji: 580 x 240 mm - Pomik mize: X-os – 415 mm; Y-os – 155 mm - Pogon: 400 V / 0,75 / 0,9 kW - Potreben prostor: pribl. Š 900 x V 1800 x G 700 mm - Teža: pribl. 270 kg - Strojni primež

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, Ficep 1201 DE 601 Excalibur drilling machine for processing flat steel and profiles, featuring a longitudinally moving drilling unit. This machine has been fully cleaned and inspected. The drilling machine is equipped with a numerically controlled, longitudinally moving drilling unit (X-axis), range 0 - 15,000 mm, and an automatic tool changer with HSK A80 holder for 6 tool positions. With its 19 kW drilling spindle drive, this machine is suitable for use with carbide drilling tools. Technical details: Profile and flat steel support with guide rail and fixed table Total length: 15 m Mobile drilling unit for longitudinal positioning on workpieces Horizontal drilling head with one drilling spindle Additional tool storage in X-axis direction Clamping device for securing material Position detection device Max. profile size: 1200 x 1200 mm Number of drilling spindles: 1 pc. Drilling diameter: 5 - 40 mm Thread cutting: M6 - M30 Drilling spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 Dkedpev Iamzsfx Ah Soi For more information, please contact us.

Stanje: novo, Leto izdelave: 2026, CORMAK Z7016A Vario Bench Drill for Metal – Precision Pillar Drill with Stepless Speed Control The CORMAK Z7016 Vario bench drill is a compact and functional pillar drill for metal, designed for precise drilling operations in professional and workshop applications. With stepless speed adjustment, a robust construction, and versatile standard equipment, this model delivers maximum control over the drilling process and high work efficiency. Key Advantages of the Machine • Stepless speed regulation – range from 440–2600 rpm allows optimal adaptation to the material being processed. • Robust cast iron construction – provides high rigidity and reduces vibrations during operation. • Worktable with height and angle adjustment – tiltable from -45° to +45° and height-adjustable via rack and pinion. • Laser indicator and LED lighting – ensure maximum drilling precision and operator comfort. • Electronic speed display – enables full parameter control in real time. • 65 mm vice included – machine ready to use straight after unpacking. Design and Technology The Z7016A Vario metal bench drill is built on a sturdy column with a 60 mm diameter and a rigid cast iron base of 345 × 210 mm. The machine body and worktable are made from precisely machined castings. The MT2 taper allows for a wide range of tool mounting, and a spindle travel of 60 mm enables drilling of deep holes. The total height of the machine is just 870 mm, making it an extremely ergonomic and portable unit. Precision and Work Efficiency Thanks to its 500 W (S1) and 650 W (S6) motor, the CORMAK Z7016A Vario pillar drill enables effective drilling in metal up to 16 mm in diameter. There is no need to change gears – the infinitely variable speed control significantly shortens machine setup times. The ergonomic three-arm feed lever, depth gauge, and spindle guidance system provide high repeatability and accuracy of holes. Applications The Z7016A Vario model is a bench drill for metal recommended for: • locksmith and service workshops • maintenance departments • technical schools • small production lines and prototyping facilities Standard Equipment • 65 mm vice • Laser drilling indicator • LED work area lighting • Electronic speed display • Three-arm feed lever • Tilting table with rack-and-pinion height adjustment Technical Data Parameter Value Max. drilling diameter 16 mm Speed range 440 – 2600 rpm Power supply 230 V Spindle taper MT2 Max spindle travel 60 mm Spindle-to-column distance 125 mm Spindle-to-base distance 430 mm Table height adjustment range 300 mm Column diameter 60 mm Table dimensions 200 × 200 mm Base dimensions 345 × 210 mm Dkedpfxexbzuvo Ah Sji T-slot width 14 mm Motor power (S1 / S6) 500 W / 650 W Total height 870 mm Weight 31.5 kg