Stroj za rezkanje/vrtanje

CORMAK HK25L Vario

Stanje: novo, Leto izdelave: 2025, Centre height: 250 mm Spindle bore: 103 mm Centre distance: 1,000 mm Swing over bed: 500 mm Lodpfx Aed I A Dhjbbohb Swing in gap: 710 mm Swing over cross slide: 300 mm Speed range: 9 - 1,600 rpm (24 steps) Spindle nose: DIN 55029 Camlock D1-8 Longitudinal feed range: 0.028 - 6.43 mm/rev; 93 steps Cross feed range: 0.012 - 2.73 mm/rev; 93 steps Metric threads: 0.5 - 224 mm; 48 steps Inch threads: 72 - 1/8 TPI; 49 steps Module threads: 0.5 - 112 mm; 42 steps Diametral pitch threads: 56 - 1/4 DP; 42 steps Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW Weight: 2,750.00 kg Dimensions: 2,500 x 1,100 x 1,380 mm

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments Lodpfx Aoqt Dmysbbohb - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, višina središča: 150 mm, skupna dolžina: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle on the X-axis. All assemblies are refurbished to a like-new condition. After overhaul, the machine is comparable to a new machine. Geometry: Lhjdpfx Aourw Uyebbeb The machine is completely disassembled down to the guideways. Before the geometry of the individual tables and assemblies can be restored, both the X- and Z-axis guideways are hand-scraped and brought to a like-new condition. Upon completion, the machine receives a measurement protocol in accordance with the manufacturer’s specifications. Painting: After restoring the machine’s geometry, it is prepared for repainting. All covers, tables, and the machine bed are stripped of old paint, cleaned, and newly painted. Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional Internal Cylindrical Grinding Machine TSCHUDIN HTG 610I Machine Equipment: Technical Data: Centre height: 150 mm Centre distance: 680 mm Grinding length: 620 mm Machine weight and footprint: 2,500 kg // 2,340 x 1,445 x 1,900 mm Standard machine equipment: 1 pc. workpiece spindle headstock MK5 1 pc. operator panel 1 pc. mount for internal grinding spindle 1 pc. speed controller for belt spindle (UJ50 / UJ80) FISCHER 1 pc. hydraulic unit Optional: • 2-axis digital measuring system • Freely adjustable speed (1–800 rpm) incl. soft start (higher speeds available upon clarification of technical details) • Separate low-speed setting for part alignment

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Lhedpfxot Hwzis Abbjb Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: novo, The RSM 500 A is a conventional cylindrical grinding machine from the grinding machinery category, distinguished by its robust construction and long, supportive guideways. Its heavy-duty machine base made from high-quality cast iron ensures maximum stability and precise grinding results. The swiveling table and finely adjustable hydraulic feed guarantee smooth operation, while large graduated dials on the X-axis handwheel facilitate precise infeed adjustments. This equipment is complemented by a standard position display with linear scales, enabling easy monitoring of actual values. Versatile applications such as internal and external cylindrical grinding as well as taper grinding are supported by the hydraulically adjustable workhead. Buyers receive extensive standard accessories, including an internal grinding device and a work lamp. Experience outstanding performance and precision with the RSM 500 A – contact us now to optimize your grinding projects! Lhedpfsncdx Nsx Abbob

Stanje: dober (rabljeno), Wheel diameter – max. 180 mm Wheel width 58 mm Module – max. 4 Module – min. 0.5 Strokes per minute 200 – 710 Total power requirement 3 kW Machine weight approx. 3 t Lodpfeuayw Sox Abbehb Good condition, change gears, etc. Year of manufacture approx. 1964

Stanje: novo, Leto izdelave: 2025, Metal Lathe TYTAN 750 PRO (VARIO) 400V (without base) with variable spindle speed. The lathe is designed for machining external and internal cylindrical surfaces, thread cutting, drilling, countersinking, and reaming holes. Typically used in small industrial workshops, repair shops, garages, etc. This machine version is supplied without a base. The universal TYTAN 750 PRO lathe, thanks to its infinitely variable spindle speed adjustment, is an ergonomic machine that meets user demands. Reduced setup time when processing parts of different sizes translates into improved efficiency and ease of operation. VARIO version – electronic, stepless spindle speed adjustment via DC motor and voltage regulator. This ensures optimal rotational accuracy of the lathe chuck, resulting in high-quality machining of workpieces. Key advantages: - Modern DC motor with infinitely variable spindle speed ensures convenience and reduces calibration times. - LCD screen with spindle speed display allows control and quick adjustment of spindle speed during setting of cutting and threading modes. - Two spindle speed ranges: low (50-1125 rpm) for machining hard steels, and high (100-2250 rpm) for high-speed precision turning. - Thread cutting: metric – 18 pitches (0.2-3.5 mm); imperial – 21 pitches (8-56 TPI). Left- and right-handed thread cutting available. - Automatic longitudinal feed with 6 speed settings (0.07 to 0.40 mm/rev) – significantly reduces processing time without compromising machining quality, especially for long parts. - Fully compliant with EU (CE) directives as well as Polish and DIN standards. Technical specifications: Ledpfx Aevvlxlebbohb - 3-jaw chuck: 125 mm - Max turning diameter over bed: 250 mm - Turning diameter over cross slide: 150 mm - Turning length between centers: 750 mm - Max workpiece length (chuck/center): 700 mm - Bed width: 135 mm - Spindle bore: 27 mm - Spindle taper: MT4 - Tool post dimensions: 65 x 65 x 20 mm - Max tool size: 12 x 12 mm - Compound rest travel: 70 mm - Cross slide travel: 135 mm - Longitudinal travel: 650 mm - Spindle speed regulation: stepless (L/H) - Spindle speeds: L: 50–1125 rpm / H: 100–2250 rpm - Number and range of metric threads: (18) 0.2–3.5 mm/rev - Number and range of imperial threads: (21) 8–56 TPI - Number and range of longitudinal feeds: (6) 0.07–0.4 mm/rev - Tailstock quill diameter: 30 mm - Tailstock quill travel: 60 mm - Tailstock quill taper: MT2 - Motor power S1/S6: 1.1/1.32 kW - Dimensions L/W/H (without base): 1310 x 610 x 480 mm - Weight (without base): 165 kg

Stanje: rabljeno, Leto izdelave: 1969, Wheel diameter - max. 160,175 mm Wheel width 355 mm Module - max. 4.5 Lhjdpfx Abovzhf Sobob Spindle bore 75 mm Centre distance between centres 410 mm Number of teeth - min. 2, 3 Cutter diameter max. 115 mm Cutter length max. 105 mm Axis distance between cutter and workpiece - max. 138 mm Axis distance between cutter and workpiece - min. 30 mm Milling head - swivelling 120° Cutter speeds 70 - 400 rpm Axial feeds 0.25 - 4.0 mm/rev Radial feeds 0.09 - 1.5 mm/rev Total power requirement approx. 9.5 kW Machine weight approx. 3.5 t Space requirement approx. 1730x1400x1440 mm Equipment/accessories: - Change gears - Milling arbors - Clamping devices - Documentation

Stanje: novo, Drilling capacity in steel (diameter): 16 mm Lsdpoupxcysfx Abbshb Throat depth: 180 mm Drilling stroke: 85 mm Spindle mount: MT 2 Spindle diameter: 47 mm Spindle speeds: 320 - 3300 rpm Table transverse travel: 230 mm Table longitudinal travel: 100 mm Table clamping area: 420 x 155 mm Connection voltage: 230 V Max. packaging dimensions: 900 x 600 x 300 cm Total power requirement: 0.75 kW Machine weight: approx. 80 kg Dimensions (L x W x H): 0.7 x 0.7 x 0.8 m Drilling and milling machine with: - Cross slide - Feed via handwheel - Chip guard - 16 mm drill chuck - Mechanical MT tool clamping

Stanje: zelo dobro (rabljeno), 16 end mills with indexable inserts Manufacturer: Walter Lhjdpfx Absdx D Tvjbeb Weight: 9.5 kg