VERTIKALNA TRAČNA ŽAGA

CORMAK HBS700

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Hnedpogbfaxofx Abxjn Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm

Stanje: rabljeno, Leto izdelave: 1966, max. pulling force 5 t, max. stroke 850 mm, max. cutting speed 12 m/min, max. return speed 25 m/min, clamping area 410 x 575 mm, groove width 3 - 90 mm, bore diameter 13 - 500 mm, workpiece weight: 6,000 kg, depth of machine base below floor level 1,400 mm Hnedpfx Aecm Elnebxen

Stanje: novo, - Capacity: 700 x 2 mm - Conical rolling - Removable upper roll - Foot control - Emergency stop - Documentation Hodjihv Hpepfx Abxonn - 400V

Stanje: novo, Bernardo Manual Metal Circular Saw CS 315 H Technical Specifications Saw blade diameter: 315 x 40 mm Speed: 19 / 38 rpm Max. vice opening: 150 mm Working height: 920 mm Motor output S1 100%: 0.75 / 1.5 kW Motor input power S6 40%: 1.0 / 2.1 kW Voltage: 400 V Machine dimensions (W x D x H): 530 x 1000 x 1740 mm Weight: approx. 235 kg Solid round material 90°: 80 mm 45°: 70 mm Round tube 90°: 80 mm 45°: 70 mm Square tube 90°: 80 x 80 mm 45°: 70 x 70 mm Solid square material 90°: 80 x 80 mm 45°: 70 x 70 mm Rectangular tube 90°: 90 x 80 mm 45°: 80 x 70 mm Solid rectangular mat. 90°: 90 x 80 mm 45°: 80 x 70 mm Features Gear head swivels 90° left and right for slotting operations Removable coolant tank integrated into robust machine base Gearbox with hardened and ground worm shaft and bronze worm wheel Safety guard opens automatically during cutting Precision, 4-way guided, self-centering double vise Ergonomically shaped handle with push-button for fatigue-free sawing Low blade speed (19 / 38 rpm) ideal for cutting solid materials Hnoded Id Ugepfx Abxjn Noise-reduced reduction gearbox running in oil bath Scope of Delivery Coolant system with filter Self-centering vise Machine base

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2023, For sale: Demonstration machine Felder FB-710 bandsaw with a cutting width of 690 mm. The machine was used only for a short period for demonstration purposes at our facility. Therefore, it is to be considered as near-new and comes with full warranty/guarantee. Technical specifications: - Table size: 840 x 700 mm - Cutting height: 460 mm Hnodpfxeww Hhvs Abxsn - Cutting width: 690 mm - Table tilt: -5° to +45° - Blade length: 5120 mm - Weight: approx. 400 kg - Motor power: 7.5 HP - Exhibition machine - Year of manufacture: 2023 The bandsaw is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-A0117-67

Stanje: novo, Cutting capacity at 90 degrees: round 500 mm Cutting capacity at 90 degrees: square 420 mm Cutting capacity at 90 degrees: rectangular 600 x 400 mm Saw blade length: 5320 x 34 x 1.1 mm Blade speed: 15 - 100 m/min Table height: 805 mm Total power requirement: 3.0 kW Machine weight: approx. 1.45 t Hnsdpfx Aoupxupsbxjn Space requirement: approx. 1.72 x 2.5 x 2.5 m Double miter band saw, hydraulic semi-automatic, DGS 500/600 HA-I • Miter angle left & right up to 60° • Frequency-controlled saw drive • 34 mm blade height • Wear-free, ball-bearing mounted swiveling material support table • Saw blade guides adjustable via extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates • 2 integrated support rollers left and right • Removable chip tray (for cleaning/disinfection) • Free-standing, safe and ergonomic control panel • Storage space for saw blades and consumables • Hydraulic cutting pressure control valve • Material height sensor (automatic cut start detection) • Super-fast pre-tensioning (front loading) • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Minimum cutting diameter round from 10 mm Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid feed down to material or, for serial cutting, direct cutting 4. Switch off saw blade 5. Raise frame just above material 6. Open vise

Stanje: novo, Thread diameter: 12 mm Infinitely variable speed: 375 rpm Working range: 180 - 2000 mm Motor power: 0.7 kW Hsdpfxsd Iinno Abxjnn Weight: 28 kg Electric tapping machines for M3 - M12 threads, angle adjustable. Features a working range of 180 - 2000 mm. Supplied with 7 quick-change chucks with slip clutch. Adjustable via display: - Variable speed - Adjustable depth - Material selection - Selection of main rotation direction - Thread selection.

Stanje: novo, In stock Reach: 610 mm Hnedpfxoilk Nyo Abxen Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Auxiliary table size: 220 x 500 mm Bandsaw blade length: 3970 mm Cutting speed, stepless: 20 - 85 / 120 - 500 m/min Bandsaw blade width: 3 - 16 mm Table tiltable, 4 directions: 15° Main motor power: 1.5 kW Bandsaw welding unit connection: 2.4 kVA Weight, approx.: 700 kg Features: - Stepless cutting speed - Bandsaw blade welding device - Bandsaw blade in adjustable precision guides - Work table tiltable on all sides (not available with machines featuring table feed, due to design) - Bandsaw shear - Grinding unit - Chip brush - Lifting eye for relocating the machine - Machine lamp - LED speed display - Air blower - CE certified

Stanje: novo, Leto izdelave: 2026, število valjev: 3, - Capacity: 700 x 4 mm - Conical rolling - Removable top roller - Braked motor Hnodpfx Abjh Raytoxsn - Foot control - Emergency stop - Documentation - 400V

Stanje: dober (rabljeno), Koda: 0285 Znamka: CENTAURO Model: CO 800 - CE standard Hsdpoyxmqgsfx Abxsnn Tračna žaga za rezanje lesa, plastike in aluminija - CE standard Tehnični podatki: Premer litoželeznega vztrajnika: 800 mm Maksimalna višina reza: 500 mm Višina mize od tal: 960 mm Dimenzije mize: 1170 x 800 mm Maksimalna dolžina tračnega lista: 5670 mm Motor: 5,5 KM Nagibna delovna miza Teleskopski ščitnik tračne žage 2 sesalna priključka premera 120 mm Skupne dimenzije: 1625 x 940 x 2500 mm (v) Teža: 630 kg