560 mm premer vrtenja X 2000 mm med konicami

Tos SUI 50

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, We are offering this unchecked TOS Trenčín SUI 50 CNC engine lathe, year of manufacture unknown. Fsdpsy Nml Esfx Abtjgc Manufacturer: TOS Trenčín Model: SUI 50 CNC Condition: unchecked Category ID: 1519 Type ID: 2086 Machine type: engine lathe The machine powers up, and the display lights up without error messages. The chuck can be activated. Other than the emergency stop button on the machine (see pictures), no defects are visible. Unfortunately, I have no experience with this machine and am therefore unable to operate it. The machine was still in operation until the beginning of 2025. It is being sold as part of insolvency proceedings and is now available for purchase. The tools currently mounted in the machine will remain with it. The complete operating manual and wiring diagrams are available. The machine is still connected and can be inspected and tested on site. Transport should preferably be organised by the customer. Loading by overhead crane is possible. The buyer is responsible for securing the machine during transport. If you have any questions or require further information, please feel free to send us a message or call us.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, skupna širina: 3.500 mm, največja dolžina izdelka: 5.000 mm, število osi: 6, This 6-axis FRONIUS UR10 robot from the e-Series was manufactured in 2022. It features a 6-axis robot with a control panel, a maximum payload of 12.5 kg, and a reach of 1300 mm. Additional features include a 4000 mm linear axis, a rotary/tilting axis with a load capacity of 250 kg, and a torch holder. Ideal for advanced welding applications. Contact us for further information about this machine. Additional equipment • Robot controller and teach pendant Fedpfox D E Huox Abtjgc • Bumper (remote protection) and protective film for teach pendant • Multifunction flange for magnetic attachment to the torch neck • Balancer system for hose management • weldControl URCap software • TOUCHSENSE CAP – part location detection with welding wire or gas nozzle • CAP component OFFSET – for shifting and copying programs • Operating controls: Quick start buttons (Start / Stop / Reset / Emergency Stop, speed potentiometer, selector switch for 2-station operation) • slideONE: 4000 mm linear axis for Universal Robots with an effective robot stroke of 1600 mm • RotateTWO 250: external rotary/tilting axis for the robot with a load capacity of 250 kg, including standard product with octagonal plate (16 mm pitch-hole pattern) and table SW 600x50 • Safety technology: 1 set of laser light barriers with steel post and 1000 mm light curtain (Safety PLC for 2-station operation) Machine benefits Technical advantages • Maximum reach: 1300 mm • Welding technology: holdONE = torch holder with integrated Freedrive button, Fronius CMT torch • Ergonomic holder for the teach pendant • Supports all welding positions and ensures accessibility • Floor stand for freestanding axis on two columns, incl. leveling plates for mounting • The tools and 3 cabinets shown in the pictures are included in the scope of delivery. Additional information Machine still under power

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 150150900039, širina na sredini: 1.500 mm, skupna masa: 2.820 kg, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Working area Center distance: 1,500 mm MACHINE DETAILS Fsdpfx Abow Hwurotjgc Weight: 2,820 kg EQUIPMENT various lathe chucks

Stanje: novo, Leto izdelave: 2024, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min • Mitre cuts left up to 60° • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system • Machine base (supplied disassembled) Fsdpfet I R Edox Abtegc The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Fedpfx Abohpktvstsgc Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: novo, - Capacity: 700 x 2 mm - Conical rolling - Removable upper roll Fgsdpfxoihv Hpj Abtsc - Foot control - Emergency stop - Documentation - 400V

Stanje: dober (rabljeno), Manufacturer: Ursviken Type: VPF 1000/800-5.0 Control: Siemens SIMATIC panel Year of manufacture: 1970 Hydraulic press for the production of large components such as dished ends, tanks, boilers, shipbuilding, and steel construction. Upgraded in 2015 with Siemens SIMATIC panel and Rittal E-Cabinet Installation height: 2,950 mm Maximum die height: 1,500 mm Movable table & ram in X direction Extensive die set package with radii: 10/20/30/50/60/80/100 mm Pressing force: 210 kg/cm² Maximum stroke: 800 mm Machine embedded 2,350 mm below ground level Specifications: Metric | US Standard Capacity: 1,000 t Distance between uprights: 5,010 mm Table length: 3,000 mm Table width: 2,000 mm Table height: 550 mm Ram stroke: 1,450 mm Approach speed: 50 mm/min Working speed: 5 mm/min Return speed: 50 mm/min Dimensions (approx.): Fjdpfskvmi Sex Abtjgc Length: 0 mm Width: 0 mm Height: 0 mm Weight: 0 kg Please note: The information provided on this page has been obtained to the best of our knowledge and, where possible, from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. As such, no representation or contractual obligations shall be assumed. We recommend verifying all critical details.

Stanje: rabljeno, Leto izdelave: 2003, Tehnične podrobnosti: Vrtalna zmogljivost v jeklu (premer): 25 mm Iztegnjenost: 255 mm Fodpfx Aeu Idhyjbtsgc Vrtalni hod: 140 mm Vreteno MK: MK 3 Hitrost vrtenja vretena: 105 - 2980 / 8 stopenj vrt/min Razdalja vreteno/miza min./maks.: 350 / 950 mm Pritrdilna površina mize: 420 x 270 mm Miza vrtljiva: 360° Miza nagibna pribl.: 30° levo/desno Ročna nastavitev vrtalne mize: 600 mm Premer stebra: 100 mm Napajalna napetost: 400 V / 50 Hz Skupna priključna moč: 0,9 kW Teža stroja pribl.: 180 kg Dimenzije stroja (DxŠxV): 0,6 x 0,5 x 1,8 m Oprema: Röhm hitroprijemalna glava 3 - 16 mm Preklop za desni/levi tek za rezanje navojev

Stanje: rabljeno, Swing diameter over bed: 540 mm Maximum swing diameter over cross slide: 370 mm Distance between centers: 3000 mm Center height: 270 mm Swing diameter in the gap: 815 mm Bed width: 344 mm Spindle bore: 88 mm Spindle diameter at front bearing: 133 mm Spindle mount: 11" D1 Camlock Speed range: 18-1400 rpm Number of spindle speeds: 16 Three-jaw chuck Röhm Ø 315 mm Longitudinal feed: 0.06-1.0 mm Cross feed: 0.03-0.5 mm Metric threads: 0.4-14 mm Inch threads: 2-72 TPI Thread module: 0.3-3.5 mm Fgedoxnqzxopfx Abtjc Thread DP: 8-60 pitch Tailstock quill diameter: 75 mm Quill stroke: 230 mm Quill taper: MT 5 Cross slide travel: 280 mm Top slide travel: 150 mm Machine dimensions (approx.): 4700 x 1100 x 1400 mm Weight (approx.): 3200 kg Drive power: 9.4 kW Equipment: - 2-axis Fagor digital readout - Röhm wedge bar chuck Ø 315 mm incl. hard base jaws and hard top jaws - Multifix toolpost size C incl. 6 quick-change toolholders - Live center - Power-actuated chuck guard - 2 steady rests - Chip guard/back wall - Coolant device - Work lamp Guideways in good condition, no scoring, not worn. Machine is in good general condition with age-appropriate signs of use. Including operating manual.

Stanje: novo, Cutting diameter: 305 mm Saw band length: 3375 mm Cutting width: 350 mm Fsdpfx Aou Dbvtjbtogc Saw band dimensions: 3375 x 27 x 0.9 mm Cutting capacity at 90° round: 305 mm Cutting capacity at 90° square: 260 mm Cutting capacity at 90° rectangular: 350 x 200 mm Cutting capacity at 45° round: 250 mm Cutting capacity at 45° square: 230 mm Cutting capacity at 45° rectangular: 230 x 200 mm Cutting capacity at 60° round: 175 mm Cutting capacity at 60° square: 155 mm Cutting capacity at 60° flat: 170 x 100 mm Total power requirement: 1.5 / 1.8 kW Machine weight: approx. 0.7 t Space requirement: approx. 1.5 x 1.8 x 1.9 m - Mitre cuts up to 60° to the left and 45° to the right - Material height sensor - Ball bearing rotary table - Hydraulic vice, laterally adjustable - Heavy-duty, large material support - Automatic coolant system