Radialni ventilator

CORMAK FAN5500

Stanje: dober (rabljeno), Leto izdelave: 1979, Model building milling machine, universal model milling machine, milling machine, universal milling machine, tool milling machine, drilling and milling machine, model making mill -Manufacturer: Zimmermann, Universal Milling Machine Type FZ 1 with extensive accessories Nwedpfonzpx Rsx Ag Tsc -Rotatable cross table: 490 x 400 mm -Traverse paths: X/Y/Z 320/385/430 mm -Spindle taper: SK30 -Drive power: 1.1 kW -Speeds: 560 to 14,000 rpm, 8 steps -Accessories: included, see photos -Dimensions: 1000/680/H1970 mm -Weight: 477 kg

Leto izdelave: 2022, obratovalne ure: 0 h, Stanje: novo, Mobile cleaning centrifuge including buffer tank for waste water, agitator, and double-diaphragm air-operated pump. - New machine - Numerous other variants and special configurations available upon request Machine type: Process water centrifuge solid-liquid separation Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Application: Mass finishing technology, general solid-liquid separation, cooling lubricant treatment, wet blasting systems, ... Advantages: - High discharge performance thanks to acceleration forces of more than 1,800 times gravity acting within the system - Process water is recirculated, minimizing operating costs and protecting the environment - Savings on costly additives for the mass finishing process (compound) - Economical and efficient separation of solid particles from a mixture - Suitable for process liquids up to 70°C (optional cooling available) - Frequency-controlled motor drive for smooth acceleration and deceleration of the rotor Are you looking for innovative solutions for surface treatment and process water treatment? We offer a wide range of systems in the fields of mass finishing, drying, and process water technology, custom-tailored to your application. From development through to production: We supply all our products from a single source, and everything is "Made in Germany." ----- Simply contact us — we will be happy to advise you without obligation. ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This listing serves exclusively as an online presentation of our goods. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, which will also inform you about our general terms and conditions, cancellation rights, and legal notice before any purchase/contract is concluded. Nwsdpef Sqfqofx Ag Tjc

Stanje: zelo dobro (rabljeno), Vollrath EFC 200 Ball Mill Wet and dry grinding Iron-free grinding with steatite balls Lining: hard porcelain Volume: 200 l Drive power: 1.4 kW Speed: 42 rpm Each unit consists of 3 ball mills mounted on a steel frame Nwodpfx Ajk D Dwteg Tjc Very good, ready-to-use condition, straight from production!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, 1 overhauled Paul flitch separator, 2-lamella design, right: fixed lamella, left: movable lamella (for a left-hand machine) total length: 5.50 m total width: 850 mm roller pitch: 500 mm Nodpfstx A Sxsx Ag Tswc roller width: 790 mm for max. wood length: 5.00 m 8 driven spiral rollers and 3 driven smooth rollers. 11 rollers removed and fitted with new ball bearings. Movable lamella mounted on 4 ball-bearing-supported guides, easy to move, with new roller chain and 11 new return pulleys. Robust sheet metal lining between all rollers. As new condition.

Stanje: rabljeno, Vakumski tumblar Nwsdpfx Agoui Rgks Tjc Proizvajalec: Henneken Model: B3 Prostornina: 1200 litrov Električna moč: 2,8 kW Dimenzije: 1130 x 2225 x 1675 mm

Leto izdelave: 2002, Stanje: zelo dobro (rabljeno), številka stroja/vozila: Reg Nr. 976, Machine designation: Used mixing dryer Manufacturer: AVA / Holland Merten GmbH Model: HTK 200 Year of manufacture: 2002 Rotational speed: 107 rpm Material: Stainless steel Drive motor: 5.5 kW Version: EExdellCT4 Total capacity: 235 litres Product-contact parts: Stainless steel 1.4571 Gearbox: Helical geared motor Equipment: Double jacket, mechanical seal, shaft heating Dimensions: L 3400 x W 1100 x H 1500 mm Unladen weight: approx. 1,600 kg Nwjdpfxeitcvus Ag Toc Technical documentation: available Notes: Operating temperature 130°C, design temperature 200°C, internal mixer pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame, Maier head HWR 225 Condition: Used, very good Price: on request

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Nedpfjv Si Szjx Ag Tjwc Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: rabljeno, Pressure 160 t Passage width / mm Stroke / mm Working height 800 mm Total power requirement 15 kW Nodpfeiulkqox Ag Tjwc Machine weight approx. 11.8 t - Table size: 1000x1000 mm - Distance between table and ram, large stroke at top, adjustment at top: 800 mm Additional information: Extendable table

Leto izdelave: 2006, Stanje: pripravljen za uporabo (rabljen), Panel type: Core panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed speed: 15m-50m/min, capacity: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Includes extraction system. Documentation available. On-site inspection possible. Nwjdpfx Agjt Amc Ie Tec

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Basic Information Manufacturer TOS SVITAVY Njdpfxohixkhj Ag Tewc Model PKSN 32 B Category Multi-blade Saws Shipping Delivery To be agreed Semesters Technical Specifications Maximum working width: 400 mm Machine with simultaneous transport and processing of the workpiece CE certified machine Used machine Minimum working length: 330 mm Motor power: 55 kW Supply voltage: 380-400 V Safety features Completely refurbished Electrically controlled adjustments Fully operational Excellent condition Spindle diameter: 70 mm Single tool spindle Equipped with noise reduction enclosure Cast iron body Feed speed: 36 m/min Spindle lock Maximum cutting height: 160 mm New electrical system New mechanical components New pneumatics New appearance Noise level: 70 dB Right and left rotation Automatic adjustment Very good condition Cutting width: 400 mm Machine width: 1800 mm Working width Saw blade diameter: 400 mm Machine weight: 3500 kg Machine dimensions: 1600 x 1800 x 2500 mm Cutting height Processing height: 160 mm Infinitely variable feed speed With in-machine workpiece transport