Stiskalnica za furnir

COLOMBO REMO HPC 150

Stanje: rabljeno, Leto izdelave: 2015, NC 1000 Numeric Control Biesse Works Advanced Software Working area in X-axis: 4300 mm – X-axis travel: 5365 mm Working area in Y-axis: 2205 mm – Y-axis travel: 2749 mm Working stroke in Z-axis: 160 mm – Z-axis travel: 385 mm FT nesting full-plane worktable Automatic loading system with side lifting table Automatic labeller for barcode printing Automatic print and application system for adhesive labels No. 1 vertical electrospindle preset for 4 axes (C-vector axis) with automatic tool changer, HSK F63, 12 kW, incl. flange for aggregate use Knife unit integrated in the drilling head on the X-axis – Diameter: 120 mm Automatic tool change system with 8 positions – positioned on the machine operation head Automatic tool change system with 21 positions – positioned at the rear of the machine with chain Drilling head BH 40 L with independent spindles arranged as follows: - 17 vertical in X-axis - 12 vertical in Y-axis - 6 horizontal in X-axis - 4 horizontal in Y-axis Automatic unloading system with motorised conveyor Front safety and protection system with mats and safety nets Dkedpfx Afewt Snyj Sek Automatic lubrication system Air conditioning for the control cabinet 2 vacuum pumps, 250 m³/h each

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1991, Torwegge multi-blade saw Chain width: 250 mm Cutting height: 100 mm Dkjdsucnukopfx Af Sok Total connected load: 39 kW

Leto izdelave: 2003, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Drying chamber Manufacturer: Mühlböck Model: ZLSM Year of manufacture: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans, each 3 kW 10 measurement points With frequency converter With control system Heating capacity: 223 kW Water temperature: 85 °C Water throughput: 14 m³/h Voltage: 230/400 Volt Connected load: 12 kW Fans: 3 x 3 kW Control system: MB Intellevent 5000 program Djdpfxowr Tzfj Af Sjkk

Stanje: dober (rabljeno), BIESSE ARROW ATS 5-AXIS MACHINING CENTRE NC1000 Machining head with turret-type automatic tool changer Dodpfxjukcy Ee Af Sokk BH39 drilling unit, 250 m³ vacuum pump (This machine has been in operation for 10 years in a woodworking school)

Stanje: dober (rabljeno), Throughfeed line for processing door leaves, high-performance machine, processing of one leaf—lock case, handle, and hinges—in approximately 30 seconds. The machine consists of two units, each with a left and right section performing specific operations. In the first unit, the left section mills the faceplate recess for the lock and drills holes for the handle and key; simultaneously, the right section drills the hinge holes. In the second unit, the left section makes and deepens the lock pocket, while at the same time the right section installs the hinges. Dsdpfxeuq Scpo Af Sjkk

Stanje: dober (rabljeno), Koda: 0136 Znamka: ITALPRESSE Model: FORMATIC 20.9 Hidravlična membranska stiskalnica Obojestransko lepljenje furnirja na panele, ki so na eni strani oblikovani ali profilirani, na drugi pa ravni – za lepljenje vhodov na omarice, čelne stranice predalov, pisalniške in konferenčne plošče, kuhinjske delovne plošče ipd. 3D lepljenje plastičnih folij (PVC, PPE, ABS, transfer folije) na panele, ki so oblikovani ali profilirani na eni strani – za izdelavo vrat omaric, čelnih stranic predalov, pisalniških in jedilnih površin, kuhinjskih pultov, prodajnih pohištvenih elementov, notranjih vrat itd. Dimenzije plošče: 2000 x 900 mm Razmak (daylight): 325 mm Hod cilindra: 325 mm Grelec – električni kotel: 27 kW Dksdpfxjpbvqve Af Ssk Tlačna sila: 300 ton Število tlačnih cilindrov: 3 Moč hidravlične enote: 5,5 kW Manometer za kontrolo tlaka Avtomatska ponastavitev tlaka Časovnik odpiranja Skupne dimenzije (DxŠxV): 3300 x 1400 x 2400 mm Teža: 8100 kg

Stanje: rabljeno, Weinig Unimat 23 Technical data Working width: 30 - 230 mm Working height: 19 - 200 mm Dodpfxsncc Igs Af Sokk mounted on a pedestal u- re-li-o-u.o Without feed unit machine only The machine is dismantled and immediately available Transport can be arranged

Stanje: dober (rabljeno), Leto izdelave: 1973, Weinig Planing Machine 4-sider / U250 / Unimat 250 Dksdpfxsrigq So Af Sek Planing width: 250 mm Planing height: 120 mm Bottom spindle 7.5 kW Right spindle 5.5 kW Left spindle 7.5 kW Right spindle 7.5 kW Top spindle 7.5 kW Bottom spindle 7.5 kW Saw unit spindle 7.5 kW Includes planing heads Includes milling tools Includes knives Includes all accessories Good condition - immediately available Location: Austria, near Sankt Pölten

Leto izdelave: 1998, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Vanicek drying chamber with log wagon with entrance and exit gates (hinged doors) with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, electric motor 1.1 kW/400V Dehumidification Ø 50 with actuator Djdpewxdqkefx Af Sskk Dehumidification Ø 40 with actuator UGL sensors, humidification, heating valve (provided by customer) Control unit, heating coil, fan frame Stacking dimensions 1x12.5, 2x1.20, 2x1.00 m

Stanje: dober (rabljeno), Item: D-1035 Double Bulk Feeder with Portion Weigher. Completely stainless steel. Dksdpfx Afjd Nk Ucs Sok Dimensions: Hopper L 1800 x W 850 x H 1300 mm Lift: 460 mm, Small lift 100 mm, Flight 80 mm Length 2700 mm + Weigher 500 mm, Total Length 3200 mm