CNC stružnica

CMZ TX 66

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, TECHNICAL DATA Clamping Units Collet machine with main and sub spindle: 26 mm Max. turning length with workpiece gripper: 67 mm Maximum part length: Max. 300 mm / Ø 26 Clamping cylinder L/R spindle: Stationary Max. drilling diameter L/R spindle: Ø 12.00 mm Max. thread diameter L/R spindle: M8 Spindle Motor power: VAC 2.2/3.7 kW Spindle speed range L/R spindle: 80 ~ 8,000 rpm L spindle travel Z1 axis: 70.00 mm R spindle travel X2 axis: 180.00 mm R spindle travel Z2 axis: 238.00 mm Tool Slide Tool slide: Vertical linear slide Number of tool stations: 16.00 Number of tool stations slide 1: 6/4 Tool shank size: 16.00 mm Internal tool holder diameter: Ø 20.00 mm X1 axis travel: 135.00 mm Y1 axis travel: 260.00 mm Number of turning tools (L spindle) X-/Y-unit: 2/2 (Usable for L/R spindle) Z-unit: 2+2 Speed range: 100 ~ 4,000 rpm Rotary tool motor: 0.5 kW / 0.5 kW Crodpewqz Hajfx Apleb Driven tools max. drill diameter: 8.00 mm Rotary tool motor max. tapping diameter: M6 Tool Slide 2 Tool slide: Vertical linear slide Number of tool stations: 7.00 Number of tool stations slide 2: 3/4 Tool shank size: 16.00 mm Internal tool holder diameter: Ø 20.00 mm Y2 axis travel: 215.00 mm Machine Dimensions Machine height: 1,670.00 mm Floor space (W x D): 2,320 mm × 1,335 mm Machine weight: 3,000.00 kg SCOPE OF SUPPLY Includes, among others (list not exhaustive): Miyano BX-26S CNC lathe (Year of construction: 2008) Tool holders (see photo of the machine interior) Fire extinguishing system Control for high-frequency spindle High-frequency spindle Chip conveyor Oil mist separator Exact scope of supply according to photo documentation No guarantee is given for the correctness, completeness, or timeliness of the information provided.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Le posizioni degli utensili rotanti sono: T01-02-03-04 / T22-23 / T34-35 - equipaggiata con Iemca Boss 332E/32, anno 2006 - numerosi pinze e boccole di guida - controllo MSC-501 - la macchina ha sempre lavorato a olio. Crjdpjwpu Etsfx Aplob

Stanje: novo, Extraction capacity at nozzle* (Filter unit): 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Sound level*: 52 dB(A) Dimensions L/W/H in mm: L 329 / W 374 / H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte *Depending on filter configuration Special voltages or special colours available on request Application: Extraction of oil mist and fumes, suitable for small to very large machine workspaces | Oil mist separator Your advantages of the ELBARON series: - 18 device variants available - Directly from the manufacturer - ISI-TRONIC standard (digital filter control) - Electronically controlled EC-fan as standard - Adjustable speed and air output - Available in simplex (single-stage) or duplex (two-stage) versions - Wide range of air performance options Crjdoh Rdwxspfx Apleb - Adaptable to pollutant load and air performance requirements - Large range of installation and connection accessories - Quality made in Germany The ELBARON® filter series has been designed for use in metalworking operations with pure oil as well as for the separation of oil mist and fumes (oil mist separator). For many years now, the digital electrostatic air filters of the ELBARON® series have ranked among the most efficient filter units on the market and are in use worldwide. Our filter units are already supplied with digital control as standard and can, for example, be operated via laptop. The ELBARON® product series includes 18 device variants and can be optimally configured for your application in both size and capacity. ELBARON® units convince with long service life and absolute operational reliability. Our electrostatic filter cells are dimensioned to achieve the best possible filtration efficiency, long service intervals and trouble-free operation from an economic perspective.

Stanje: rabljeno, Leto izdelave: 1994, Technical Details: Cjdjl Su Rxspfx Aplsrb Number of spindles: 8 Spindle passage: 32 mm Item: Cam-controlled multi-spindle automatic lathe Brand: Schütte Model: AF32 S DNT Year of manufacture: 1994 Eight-spindle automatic lathe with 8 main spindles Max. nominal bar capacity: D=32 mm Control system: Siemens SIMATIC S7 Electronic cam controller: Balluff Gripper in position 8 for rear-side machining CNC cross slide at position 6 CNC cross slide at position 7 Workpiece conveyor belt KSS cooling system (Schimpke) Chip conveyor with magnetic separator Thread-cutting clutches The tooling shown may differ from the scope of delivery! Please contact us for further information and photos via email (at) or *

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear Feed Unit Waveline 60 Basic Credpfx Ajlxyp Hopleb Measuring range: 60 mm Resolution: 0.014 µm Measuring Column Wavelift 400 CNC Travel: 400 mm Positioning repeatability: < 10 µm Machine Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Full enclosure with electrically operated roller shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece holding plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurement  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard stone plate  Documentation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Prima Industrie Platino 1530 laser cutting machine with only 4300 cutting hours Credsivg Hgopfx Apljb This Prima Industrie Platino 1530 laser cutting machine, 4.0kW CO2, was manufactured in Italy in 2011 and installed at the end of 12/2011. Equipped with PRIMACH 20 L control unit.

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Csdpsyxpv Sjfx Apljrb Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 3-osni CNC stružnica Tip: Puma GT 2600 LM Proizvajalec: Doosan Leto proizvodnje: 2022 Novo upravljanje Fanuc i Series Plus na dotik Hidravlična vpenjalna glava Samchully 12 palcev Maksimalni premer struženja: 410 mm Maksimalna dolžina struženja: 1030 mm Premer vretena: 81 mm Hitrost vretena: 3500 obr./min Glava z orodjem: 12 pozicij BMT 55 Hitrost pogonskih orodij: 5000 obr./min X: 265 mm Z: 1100 mm C: +-360° Transporter za ostružke LNS Codpfxjywthve Apljrb Sonda za orodja Konjiček MT5 z napravo: 4 pogonski nosilci orodij 2/2 8 običajnih nosilcev orodij skupaj 12 kosov Dokumentacija Stroj kot nov, le 1800 delovnih ur Ogled možen v našem skladišču

Stanje: rabljeno, Leto izdelave: 1999, moč: 3 kW (4,08 KM), vhodna napetost: 400 V, največja višina reza: 200 mm, premer žaginega lista: 520 mm, skupna masa: 350 kg, dolžina rezanja (maks.): 420 mm, montažni premer: 50 mm, pogonska enota žage: 3.000 W, No. 04511 Graule ZS 200 N Crosscut and Mitre Circular Saw Used, year of manufacture 1999 Saw head swivels and tilts 3 kW three-phase brake motor, 400 V Saw blade diameter: 520 mm Saw blade bore: 50 mm Cutting height: 200 mm Cutting height at 45° blade tilt: 140 mm Cutting length: 420 mm Table dimensions: 900 x 700 mm (L x W) Aluminium back fence Includes machine stand and rear handwheel for tilt adjustment Hydraulic feed brake Pneumatic material clamping from above on both sides Saw blade spray system for coolant or lubricant Tungsten carbide-tipped circular saw blade for aluminium and plastics, 520 mm diameter Roller conveyor, type RLK, 4000 mm long, with fold-away material stop and scale Roller conveyor 4000 mm long after the saw Roller conveyor width: 350 mm Transport dimensions (approx.): Machine 1650 x 1200 x 1850 mm (L x W x H), roller conveyors approx. 4500 x 400 x 1950 mm (L x W x H) Weight approx. 350 kg To avoid misunderstandings, on-site inspection by appointment is possible and recommended. Item is sold as-is. Technical specifications, condition description, year of manufacture, and scope of delivery are based on the manufacturer’s brochure or previous owner, with no guarantee. Credpfx Apeyh Nfusljb Sale subject to prior sale. For used machinery, any warranty is excluded. The following applies: “purchased as inspected.” Payment terms: Prices are subject to VAT. Payment prior to collection or dispatch. Delivery terms: ex stock

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, CNC Automatic Lathe Citizen M32 Manufacturer: Citizen Machinery Co. Ltd Model: M32-4M5 Year of manufacture: 2014 Country of origin: Japan Machine weight: 3,550 kg Maximum machining diameter: 32 mm Max. machining length: 320 mm with 1 chuck Main spindle speed: 200–8,000 rpm Main spindle indexing: 1° C-axis (spindle): 0.001° Counter spindle speed: 200–8,000 rpm Max. clamping diameter (subspindle): 32 mm Max. front drilling diameter: 12 mm Max. front tapping diameter: M10 Max. rear tapping diameter: M10 Spindle bore diameter: 37 mm Number of mountable tools: up to 25 (depending on type) Rapid traverse X/Y/Z axes: up to 32 m/min Bar feeder length: 2,500 mm Coolant tank volume: 198 l Compressed air requirement: 0.5 MPa Noise level: Ø580 dB(A) Memory size: 5120 m 2048 kB Minimum input increment: 0.1 µm Interface: RS232C Number of programs: 63 Tool offsets: 32 pairs X1: 108 mm Y1: 347 mm Z1: 325 mm X2: 120 mm Y2: 44 mm Z2: 212 mm X3: 313 mm Z3: 430 mm Codpjydaadjfx Apljrb A3: 150 mm A4: 1500 mm No guarantee is given for the correctness, completeness, or currentness of the information provided.