CMP PRESS

CMP

Stanje: novo, mit Hobelwelle Typ: R-R-RP1300 Arbeitsbreite: 1300 mm Min. Werkstücklänge: 538 mm Arbeitshöhe: 3–110 mm Vorschubgeschwindigkeit: 6–30 m/min Gesamtanschlussleistung: 77,12 kW Motorleistung erste Einheit: 22 kW Motorleistung zweite Einheit: 30 kW Motorleistung dritte Einheit: 18,5 kW Schleifbandabmessungen: 1330x2200 mm Arbeits-Luftdruck: 0,55 MPa Absaugleistung: 12.000 m³/h Transportmaße (LxBxH): 3090x2020x2260 mm Gewicht: 4.700 kg Isdpfx Afsd H Sc Eo Totb

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Complete plywood panel production line including: - 1 BUERKLE composing line (year 1991) with BUERKLE roller gluer (length 3400 mm) + 1 OLM longitudinal strand conveyor + 1 OLM cross strand conveyor + 1 assembly table. - 1 press loading rack with 10 positions. - 1 BVH 10-level hot press with thermic oil heated platens. - Platen size: 3700 x 1900 mm - Platen thickness: 40 mm - Opening between platens: 75 mm - 1 central hydraulic cylinder D700 mm, max. hydraulic pressure 315 kg/cm² - 1 press unloading rack with side ejection pushers on a lift table. Line currently in operation, available second half of 2025. Itjdpfx Afjul Uize Tsb

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Itodpswx Aaqofx Af Tjb Availability: short-term Location: 63934 Röllbach

Stanje: dober (rabljeno), Leto izdelave: 1998, Pallet nailing machine P+K Pallet nailing machine P+K SNM-III-24-1250 Intermediate drive with branding stamp Itedpfxjuzh Ane Af Tob Positioning table Portal stacker Pallet size: 600x800 - 1200x1400 mm

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Itsdpfx Aoc Tmygjf Tsb Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Leto izdelave: 1979, Stanje: pripravljen za uporabo (rabljen), A Gebr. Pfeiffer ball mill is available. Drive power: 330 kW, diameter: 2,400 mm, length: 5,000 mm, number of motors: 2, motor weight: 180 kg, flywheel width: 3.2 mm. An on-site inspection is possible. Itodjv Dwirspfx Af Tsb

Leto izdelave: 2011, Stanje: zelo dobro (rabljeno), This is a complete plant for house construction. The prices are listed for each item. Consisting of the following individual components (see attached document): Pictures will follow and are already included in the attached document. Table 1 (Insertion and clamping of the frame work) €34,500 - Height-adjustable longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Table 2 (Laying and securing the first sheathing) €25,300 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 3 (Laying and securing the second sheathing, turning of the element onto the next table) €35,650 - Longitudinal transport with 3 hinge conveyors and paneling - Pneumatic transverse clamping - Connections for compressed air and electricity - Hydraulic turning device Table 4 (Installation of electrical and insulation) €34,500 - Cross transport with rollers and paneling - Cross travel of the table - Connections for compressed air and electricity - Hydraulic turning device Table 5 (Laying the first sheathing and securing the second side) €32,775 - Longitudinal transport with 3 hinge conveyors - Cross transport with rollers - Pneumatic transverse clamping - Connections for compressed air and electricity Intermediate Transport, 3 m long €4,600 (Parking station for multifunction bridge) - Longitudinal transport with 3 hinge conveyors Table 6 (Laying and securing the second sheathing) €28,750 - Longitudinal transport with 3 hinge conveyors - Pneumatic transverse clamping - Connections for compressed air and electricity Table 7 (Erection and distribution table) €29,900 - Longitudinal transport with 3 hinge conveyors - Hydraulic swinging unit - Table cross-travel unit Ijdpfx Aju D Amgof Totb - Upper guide for holding the walls vertically Manual area gantry with vacuum lifter on Table 2 €13,800 (Laying the first sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 3 €13,800 (Laying the second sheathing) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 5 €13,800 (Laying the first sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Manual area gantry with vacuum lifter on Table 6 €13,800 (Laying the second sheathing on the second side) - Load capacity 85 kg with Schmalz vacuum unit - Steel base frame with lightweight rails - Travel path 12 x 5 m Wall rack 1: 12 m long x 24 bays €11,500 Wall rack 2: 12 m long x 20 bays Vacuum lifter with column slewing crane €9,200 1 Spreader beam 2 t Abus €20,125 1 Spreader beam 2 t

Stanje: dober (rabljeno), Roots blower Manufacturer: Leybold Model: RUVAC WAU 1001 Cat. no.: 11741 Pumping speed: approx. 1000 m³/h Ijdob Rnfiepfx Af Tstb Condition: Fully overhauled Warranty: 12 months Delivery time: ex stock

Leto izdelave: 1988, Stanje: potreben popravila (rabljeno), Mehanizacija pred skobeljni stroj za KVH/BSH – za dolžine do približno 13 m. Idealna KVH+BSH linija pred skobeljni stroj. Vzdolžno razstavljanje - enojno sortiranje. 4 krožne žage za prečno razrezovanje, nastavljive po širini. Prečni razrez: 180 x 220 mm, 150 x 300 mm. Zadostuje ena upravljalna oseba. Itedpjvbtpsfx Af Tjb

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Sawmill for sale in Belgium Location: Belgium Application: Suitable for processing both hardwood and softwood Condition: Technically in excellent condition Included in the price: All machines, auxiliary installations, spare parts, and saw blades 🔧 Main Facility Lines 1. Log Handling and First Cut • 25 m chain infeed conveyor for logs • Holtec ES 120 cross-cut saw (Year: 1995)  - Max. cutting diameter: 1200 × 600 mm  - Saw type: chain saw  - Motor power: approx. 11–15 kW • Cassel Metal Shark Octa metal detector  - Eight-sided opening, DSP technology, suitable for bulk materials • 5 m long discharge roller conveyor Itedpfx Aswh U Dmsf Tob 2. Internal Timber Processing • E. Gillette Europe automatic log feeder  - Length: 3.6 m / Diameter: 400–1200 mm  - Capacity: 30–60 logs/hour  - Driven by electric and hydraulic units • Brenta PN 1600 band saw (2014)  - Rollers Ø: 1600 mm  - Capacity: logs up to Ø1200 mm  - Band width: 100–160 mm  - Automatic infeed/outfeed with conveyor belt • Elmed ARGUS 3 metal detector  - Tunnel version with split opening  - Suitable for three-shift operation • MEM Cobra 60/650 prismatic edger (2000)  - 2 active saw shafts, 2 × 55 kW motors  - Max. cutting height: 120 mm / width: 600 mm  - Automatic infeed and roller outfeed 3. Chipping and Removal • Vecoplan VTH 65/25/5/U industrial shredder (2017)  - Inlet: 650 × 250 mm / Power: 55 kW  - Capacity: 1–5 tons/hour • Vecoplan VR 65/24 vibrating table  - Surface: 650 × 2500 mm  - For even feed to the shredder • Vecoplan KKF 500-1K-U drag chain conveyor  - Conveyor width: 500 mm  - Suitable for wood chips, sawdust, pellets 4. Automatic Cross-Cutting and Sorting • Kallfass RA4000R automatic cross-cutting line (1995)  - Max. cut dimensions: 150 × 300 mm  - Length up to 4000 mm • MEM IMRPC multi-blade saw (1991)  - Up to 14 saw blades / max. cutting height 160 mm  - Automatic feed, robust industrial design • Kallfass stacking system (1999)  - Automatic stacking with interlayer strips  - Max. timber length: 2.5 m 5. Additional Equipment • Flexiever Mini Screener (2020)  - Capacity: 5–10 m³/hour  - For compost, sand, wood chips • VOLLMER CHC 20 H circular saw blade sharpener  - Saw blade Ø: 80–700 mm  - Sharpening angle: -20° to +30° • Bammesberger FBA2 surface grinding machine  - Grinding length: 400 mm / width: 140 mm • Ingersoll Rand ML30 screw compressor  - Power: 30 kW  - Air output: 4.55 m³/min (7.5 bar)  - Operating hours: 43,198 h 6. Extraction System • APW fans – 18.5 kW, year 1998 (2 fans) • Lysair fans – years 1995 and 2020 • 2 cyclones with rotary valve airlocks • Purpose: Efficient extraction of dust, chips, and fine dust 🔍 The sawmill can be inspected in Belgium by appointment. All equipment is fully operational and ready for immediate use. Ideal for industrial timber processing or as a complete investment.