Popolna lakirnica

CM Macchine TIN-EVO 300/10 + RMS 40×800

Stanje: rabljeno, No. 3213 Thermal Treatment Plant / Vacuum Dryer WTT Used, Year of Manufacture 2017 Thermal Treatment Plant / Thermal Chamber for Wood Modification The WTT thermal chamber is a plant for the thermal modification of wood. It enables efficient treatment of 2 to 3 batches per day, depending on wood thickness and type. The plant features a powerful energy and heat transfer system and operates with a gas- or oil-fired boiler using thermal oil as the heat transfer medium. Technical Data: Capacity: 5,950 - 9,900 m³ of wood per year (based on 330 working days) Usable volume: 9 m³ (with 50 mm wood thickness) Stack dimensions (LxWxH): 10,500 x 1,300 x 1,100 mm Minimum board thickness: 10 mm Power supply: 3 x 400 V, 50 Hz + neutral + earth, 63 A Specific power consumption: 15.9 kW/m³ Maximum heating output: 2 MW (230 °C - 250 °C thermal oil) Heat consumption: 120 kWh/m³ wood Autoclave length: 11,000 mm Autoclave diameter: 1,800 mm Autoclave material: 10 mm stainless steel Duplex EN 4462 Door opens hydraulically, 1.5 kW drive Operating pressure: 0.1 to 15 bar (absolute) Operating temperature: 0 °C to 220 °C 200 mm glass wool insulation, covered with 1 mm galvanized steel sheet Main Components: 1. Autoclave for heat treatment 2. Vacuum system for extracting air from the autoclave before heating 3. Energy center with a 2 MW oil burner 4. 4 MW cooling system with dry coolers 5. Nitrogen generator 6. Gas cooling system Heating and Cooling System: Heat exchangers: 8 units (4 each side) Material: Stainless steel tubes (seawater resistant) Fedpfxjv Si Szs Ah Nogd Total surface area: 165 m² Cooling water consumption: 1,000 l/batch (not contaminated, only heated) Control and Operation: Control system: WTT ExoT (fully automatic) Displays: 22" color monitor with IBM computer and printer Sensors: 4 PT100 temperature sensors 2 mechanical thermometers 1 vacuum/pressure transmitter 1 mechanical vacuum/pressure gauge Special Equipment: Hydraulic rail bridge for easy transport of wood trolleys Automatic trolley extraction with winch (1.5 kW) 2 MW thermal oil boiler (heating) Heating oil tank (4,000 l) with measuring system Insulated 20-foot steel container for heating module Safety chimney made of stainless steel (300 mm diameter, 6,000 mm length) Function Description: 1. Loading the autoclave with wood 2. Generating preliminary vacuum 3. Filling with gas 4. Heating 5. Modification 6. Cooling 7. Pressure equalization 8. Generating final vacuum / drying 9. Pressure equalization 10. Unloading Certified according to EC Pressure Equipment Directive (PED) 97/23/EC Design according to EN 13445 Sale on behalf of customer, ex location near 5020 Salzburg (Austria), without disassembly, without transport or installation Disassembly, loading, and transport by us are possible as an option Errors in description and pricing reserved To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale takes place as is Technical data, description of condition, year of manufacture and scope of supply according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "purchased as inspected" Pictures and videos are for illustration purposes only and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: generalkompletno obnovljen (rabljeno), VERSCHIEDENE MOTORTYPEN UND SCHLITTEN FÜR CELASCHI DET GEBRAUCHT, KOMPLETT GENERALÜBERHOLT Fsdpfx Asdvlcysh Nsgd

Leto izdelave: 2001, stanje: skoraj kot novo (rabljeno), Double-aggregate sander, two lower aggregates with 2 x 7.5 kW main motor power, feed motor 4 kW, lifting and lowering motor 2 kW. The machine has been overhauled, the conveyor belt is in very good condition. New graphite shoe. The machine is equipped with two bottom aggregates: the first is a rubber contact roller, the second is a combi system with a graphite pad. Working sanding width is 630 mm. Two feed speeds: slow and fast. Sanding belt length is 1900 mm. Pneumatic oscillation. Pneumatic belt tensioning. Sanding belt speed: 18 m/s. Conveyor belt speed: 9/20 m/min. Number of sanding shoes: 1. CE conformity declaration. Total rated power: 21 kW. Maximum workpiece height: 160 mm. The machine has two lower working rollers. The conveyor belt is positioned above the workpiece. Fgedpfxjfxpbme Ah Njd

Stanje: rabljeno, Leto izdelave: 1997, Linija 3 stroji Stenner MHS9 iz leta 1997 Fjdpfxew Nrhks Ah Nsgd

Stanje: rabljeno, številka stroja/vozila: 008116, Maks. višina obdelave: 120 mm Fgsdpfjw Iddzjx Ah Nod Maks. podajalna hitrost: 25 m/min Število delovnih vreten: 6

Stanje: rabljeno, Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: AN2018080, skupna dolžina: 12.860 mm, skupna širina: 4.806 mm, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, dolžina podajanja os X: 3.000 mm, delovna širina: 350 mm, moč: 25 kW (33,99 KM), pply/reTRC 1500 – Houtreparatie- en Cosmetica Machine Technische Beschrijving • Systeemoverzicht • Processtroom Systeemoverzicht De Wintersteiger TRC 1500 is een volledig geautomatiseerd industrieel systeem, ontworpen voor het detecteren en repareren van defecten in houten planken. Het combineert geavanceerde 3D-scantechnologie met hogedruk thermoplastinjectie om consistente, hoogwaardige reparaties te realiseren op productiesnelheid. Defecten worden hersteld met thermoplastisch vulmateriaal door middel van injectie- en applicatie-units. Dankzij de nauwkeurige berekening van de vulhoeveelheid en precisie-injectie wordt geen vulmateriaal verspild. Ook de kanten kunnen worden gevuld. Belangrijkste kenmerken • Geautomatiseerde 3D-lasertriangulatie voor defectdetectie • Hogedruk thermoplastinjectie voor duurzame reparaties • Precisiebewerkingsunit voor cosmetisch perfecte afwerking • Onafhankelijke smelt-temperatuurzones met 8 kg tank • Gesloten glycol-waterkoelsysteem voor gecontroleerde uitharding • Ethernet-gebaseerd besturingssysteem met remote onderhoud • Onbeperkt aantal productprofielen en intuïtieve scannerinterface Productbereik (Werkstuk-specificaties) Lengte: 500–3000 mm Breedte: 100–350 mm Dikte: 3–30 mm Productiesnelheid: tot 10 m/min – afhankelijk van aantal en grootte van de defecten Vulsysteem – Injectie- & Applicatie-units • Injectie-unit: • 3-assige positionering (X/Y servo-aangedreven, Z pneumatisch) • Drukgereguleerde smelttoevoer • Hogedrukinjectie • Applicatie-unit: • 3-assige besturing • Fijne nabewerking van gerepareerde zones Foutdetectie: Spot Eye Scanner • 3D-lasertriangulatie en hogesnelheid-camerasysteem • Detecteert defecten vanaf ca. 1 mm diepte • Automatische hoogteaanpassing • 2D + 3D meting • Instelbare parameters voor verschillende houtsoorten Smeltunit • 8 kg tank • Onafhankelijke temperatuurzones • Geïntegreerde zuigerpomp voor constante druk Koelunit • Gesloten glycol-water circuit • Stabiele temperatuurregeling Besturingssysteem • Ethernet-gebaseerde communicatie met remote onderhoud • Toegang tot PLC, scanner, servoaandrijvingen • Energie-efficiënte regeneratieve aandrijftechnologie Scannersoftware • Verwerkt 3D-lichtprofielen • Berekent defectvolume en coördinaten • Onbeperkte productprogramma’s • Intuïtieve bedieningsinterface Fgodpfsx Dmdhox Ah Njd Hogedrukinjectieproces 1. Smelten van het thermoplastische materiaal 2. Druk- en temperatuurregeling 3. Gerichte injectie in het defect 4. Directe koeling 5. Minimale oppervlakte-residu • Voordelen: • Laag materiaalverbruik • Uitstekende hechting • Geen aantasting van omliggende houtstructuur Systeemarchitectuur • Smeltunit • Verwarmde slangen • Injectiekop • Koelplaat • Koelunit met retourstroom

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: Fedpfex Ah A Asx Ah Njgd • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2020, Ponujamo rabljeno hidro-toplotno napravo za obdelavo lesa IWT Moldrup-SPP Industrijska naprava MOLDRUP-SPP je zasnovana za hidro-toplotno modifikacijo lesa premerov do 2.600 mm in dolžin do 12.000 mm. Izdelana je iz robustnega nerjavečega jekla ter konstruirana za neprekinjeno industrijsko proizvodnjo z v celoti avtomatiziranim PLC-krmiljenjem. Industrijska hidro-termična naprava za obdelavo lesa – Ø2.600 x 12.000 mm Industrijska naprava za hidro-toplotno obdelavo je namenjena učinkoviti in enakomerni termični modifikaciji lesa v nadzorovanem, kisika prostem okolju. Fgedpfx Asymxqajh Ned Jedro naprave predstavlja robusten nerjaveč jekleni avtoklav Ø2.600 mm × 12.000 mm, ki omogoča obdelavo približno 15–22 m³ lesa na eno polnjenje, pri obratovalnem tlaku do 12 bar (absolutno). Popolnoma avtomatiziran sistem s PLC-krmiljenjem omogoča natančen nadzor vakuuma, tlaka, temperature in večfaznih procesnih ciklov. Integriran vakuumski sistem zagotavlja varno odstranjevanje kisika, medtem ko sistem ogrevanja s termalnim oljem skrbi za natančno upravljanje temperature tekom celotnega postopka. Celotna postavitev obsega tlačno posodo, ogrevalni sistem, vakuumsko črpalko, cirkulacijski ventilator, sistem za ravnanje s kondenzatom, nakladalni voziček ter varnostno opremo. Priloženi so tudi agregat za ogrevanje s termalnim oljem (boiler skid) in naprava za nadzor emisij. Tehnična dokumentacija je na voljo na zahtevo. Hidro-toplotna naprava za obdelavo lesa se prodaja v videnem/obstoječem stanju. Za vsa dodatna vprašanja ali več informacij nam lahko pišete ali nas pokličete.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, obratovalne ure: 50 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 000247, GLUESTREAM PU-300 1C GLUING MACHINE FOR SINGLE-COMPONENT POLYURETHANE ADHESIVE Pre-owned machine, in nearly new condition • Maximum gluing width: 300 mm • Gluing head divided into 3 combs, each 100 mm, individually controlled by solenoid valves • Glue bead spacing: 10 mm • Tray with anti-stick liquid automatically closes combs when the machine is not dispensing • Adjustable glue output: 100 to 200 g/m² as required • Gear metering pump • Suitable glue viscosity range: 10,000 to 30,000 mPas • Feed speed: 7 to 15 m/min • 200 l drum holder Fgsdpfot Nfarox Ah Njd • PLC control with touchscreen display, KINCO brand • Manufactured by GLUESTREAM (Slovakia), assembled in Ukraine • CE compliant • Year of manufacture: 2021, assembly in May 2022. Like new, less than 200 operating hours WE ALSO HAVE THE HYDRAULIC PRESS FOR GLULAM BEAM PRODUCTION

Stanje: rabljeno, • Štiristranski skobeljni stroj s klasičnim vretenom Fgsdexxkt Aopfx Ah Ned • Delovna širina do 240 mm • Delovna višina do 120 mm • Minimalna delovna višina 6 mm • Hitrost vrtenja vretena: 6000 vrt/min • Brezstopenjsko nastavljiv pomik 5–25 m/min (opcijsko do 36 m/min) • Dolga osna nastavitev na vertikalnem vretenu, do 80 mm • Vsa orodna vretena z neodvisnimi motorji