Stružniki in oblikovalci

CHAMBON PROFILMAX

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 120 mm, širina obdelovanca (maks.): 230 mm, model krmilnika: Siemens Simatic Panel Touch, dolžina obdelovanca (maks.): 8.483 mm, TECHNICAL DETAILS Min. processing height: 6 mm Max. processing height: 120 mm Min. processing length: 370 mm Max. processing length: 8,483 mm Min. processing width: 25 mm Max. processing width: 230 mm Maximum feed speed: 12 m/min Rubber-coated feed rollers: 1 Toothed feed rollers: 4 Total number of rollers: 5 Rsdjyqx T Aepfx Afasw MACHINE DETAILS Control: Siemens Simatic Panel Touch Processing unit 1 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 2 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Max. tool diameter: 4 mm Processing unit 3 Motor power: 4 kW Shank diameter: 40 mm Shank length: 240 mm Processing unit 4 Motor power: 5.5 kW Shank diameter: 40 mm Shank length: 240 mm Automatic chip discharge power: 24 kW EQUIPMENT Safety standard: EC marking The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for installation, securing, and use of the machine at the destination. External reference: 7243

Leto izdelave: 1999, stanje: pripravljen za uporabo (rabljen), Max. clamping force: 500 kN, opening stroke: 350 mm, mould installation height: 200 mm, heating capacity: 6.5 kW, screw diameter: 40 mm, weight: 2.33 t, no documentation available. Rodpfx Afsilhfceaow

Stanje: dober (rabljeno), Avtomatski skobelni stroj 230/120 mm, primeren za profiliranje, leto 2006 Redpfx Afsxn Uptoasw

Stanje: rabljeno, Technical data: Max. planing width: 230 mm Max. planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle configuration: bottom 5.5 kW right + left 11 kW top 7.5 kW universal 5.5 kW Each spindle driven by a separate motor Number of steel feed rollers (top): 5 Number of rubber feed rollers (top): 3 1 rubber roller in the table Extraction port diameter: 150 mm Stepless feed speed adjustment: 4–24 m/min Feed via drive shafts (cardan shafts) Table lubrication pump Operating pressure: 6 bar Electric height adjustment of the machine frame Power supply: 400 V Redpomiik Tofx Afaow Overall dimensions: Length: 4,240 mm Width: 1,550 mm Height: 1,560 mm

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO126, Used HDPE extrusion blow molding system for 10 L – approx. 300 bph – Overview Used Uniloy Milacron HSM10/D extrusion blow molding machine designed for the production of HDPE containers up to 10 L. Featuring a single-parison head and robust clamping unit, this EBM unit is ideal for industrial packaging and beverage manufacturing auxiliary facilities (e.g., water cans, edible oils) and can be integrated into a used filling line. Documentation and operating manuals are available. Reference number: SO126. Technical specifications & performance data Key data Manufacturer/model: Uniloy Milacron HSM10/D Year of manufacture: 2000 Technology: Extrusion blow molding (EBM), single parison Material: HDPE Number of cavities: 1 Max. container volume: 10 L Indicative output: up to approx. 300 bph at 10 L (application dependent) Operating manuals: included Reference number: SO126 Extruder Screw diameter: 100 mm; L/D 24 HDPE screw speed: 0–70 rpm Plasticizing output (HDPE): approx. 300 kg/h Main extruder motor: 89 kW Heating zones: 6; cylinder heating power: 31.4 kW Motor cooling power: 0.58 kW; cylinder cooling power: 1 kW Parison head Type: PE 1/200, single parison Max. die head diameter: 200 mm Head heating power: 14.2 kW Parison wall thickness control: hydraulic (wall thickness programming) Clamping & blowing unit Rsdpfx Afoyhbt Hjaow Clamping force: 200 kN Max. mold size: 650 × 500 mm (H) Mold thickness: 2 × 150 mm Mold opening stroke: 300 mm Horizontal carriage stroke: 660 mm Blow pin stroke: 240 ± 5 mm Blow pin thrust at 50 bar: 320 kg Electrical Installed power: 156 kW (average consumption approx. 104 kW) Supply: 400 V, 50 Hz, 318 A, 3 + N Hydraulic system Oil tank capacity: 400 l Pump flow rate (1470 rpm): 123 l/min Maximum pressure (main circuit): 190 bar Main hydraulic motor: 37 kW; oil cooler motor: 1.5 kW Pneumatics Operating pressure (general): 6–8 bar; air demand: 2000–2500 Nl/min Post-cooling pressure: 6–8 bar; air demand: 1000–1500 Nl/min Cooling water Mold circuit: 8–12 °C; flow rate 15 m³/h Extruder & hydraulic oil cooling: 10–24 °C; flow rate 4 m³/h Dimensions & weights Approx. machine dimensions (L × W × H): 7600 × 7700 × 3900 mm Blow unit weight: 7600 kg; extrusion group weight: 6400 kg Noise level at operator position: < 85 dB(A) Advanced automation & control systems Hydraulic wall thickness programming for precise parison control, improving weight distribution and top load for 10 L containers. Proprietary Uniloy command and control software (version code available in manuals) with HMI for setpoint management and diagnostics. Integrated temperature control via six extruder zones and heated die head for stable processing at up to 300 °C transformation temperature. Interlocked safety guards and emergency-stop switches for safe operation. Capabilities for integration into the production line

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Stroj za izdelavo žebljev Proizvajalec: WAFIOS Model: N90 Leto izdelave: 1994 Območje premera: 2,5-3,8 mm Dolžina žebljev: 50-90 mm Kapaciteta – kosi/min: 800 Rodpfx Afeuhxqmjajw Stroj vključuje avtomatski rezalnik žice in čistilec žice!!

Stanje: rabljeno, Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: D02I/8335, Številka ponudbe: D02I/8335 Vrsta stroja: Navojni valjar za žeblje Proizvajalec: ENKOTEC Tip: TA01 Letnik: 2013 Obseg premera: 1,8 - 4,2 mm Dolžina stebla pod glavo: 32 - 105 mm Dolžina navoja (min./maks.): 27 - 75 mm Kapaciteta kosov/min: 2500 Lokacija: V Nemčiji Redpfswm Rtzjx Afasw

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph This HDPE blow molding machine features a highly specialized system for forming containers from high-density polyethylene (HDPE). The machine handles bottle formats up to 2 liters and achieves a production capacity of up to 2700 bottles per hour (bph). Furthermore, the system employs a 4+4 configuration, i.e., four upper and four lower cavities, optimizing production through a symmetrical and highly efficient design. This machine will be available from mid-October. Main technical features of the HDPE blow molding machine TECHNE SYSTEM Rjdpfx Asvgvkasfasw To guarantee high precision in bottle molding, the blow molding system offers a cavity spacing of 150 mm. In addition, the machine is equipped with a twin carriage, optimally controlling the production cycle and minimizing downtime. Specifically, this blow molding machine can process containers up to 2 liters, allowing for high flexibility in the production of various packaging types. Mold configuration and flexibility Although the machine is supplied without molds as standard, it supports a wide range of mold sizes up to a maximum capacity of 2 liters. Moreover, the entire system can be easily adapted to specific production requirements. If required, additional accessories or necessary modifications can be provided as separate options. In addition, our technicians responsible for dismantling can also handle the reinstallation of the machine, ensuring reliability and continuity of operation. Manuals and technical documentation This blow molding machine is supplied with complete technical manuals and detailed wiring diagrams to assist with installation, maintenance, and daily operation. The documentation contains detailed specifications on container tolerances as well as technical schematics of system components. As a result, the design enables the optimization of critical parameters, such as bottle spacing and the distance between extruders and container bodies. Production and performance This used blow molding machine supports a production capacity of 2400 to 2700 bottles per hour, depending on operating conditions and container type. As a result, the production rate remains constant. In terms of precision, the stroke of the mold carriage extends to 660 mm, enabling finely calibrated...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Five-head four-sided planer Steton. Five-head four-sided planer Steton. The machine has been serviced and does not require any additional investment. Technical specifications: - Maximum working width: 23 cm - Maximum working height: 13 cm - Spindle diameter: 40 mm - 1 - Bottom horizontal: 23 cm - 2 - Right vertical: 13 cm - 3 - Left vertical: 13 cm Redji Apuhepfx Afajw - 4 - Top horizontal: 23 cm - 5 - Universal soundproof cabin, 360 degrees - Electric thickness adjustment - Two feed speeds

Stanje: rabljeno, Leto izdelave: 2009, številka stroja/vozila: PR21, Technical Specifications & Performance Data This Husky injection molding machine is engineered for high-volume production of PET preforms, making it ideal for integration into a used bottling line or as a second-hand addition for industrial packaging operations. The 120-ton clamping platform is combined with a 32-cavity hot runner system, ensuring uniform output of PET preforms for multiple bottle formats. Manufactured by Husky in 2009, the unit is designed for rapid mold changes and stable cycle times, supporting beverage production with precise neck finishes and preform weights. Manufacturer: Husky Model: HyPET120 P85/95 E85 Year of manufacture: 2009 Clamping force: 120 tons Cavities: 32 Hot runner system: Husky 32-cavity hot runner, uniform across supplied molds Neck finishes: 29/25 mm primary; additional parts for 30/25 mm Preform weights (29/25 mm sets): 9.02 g, 12.46 g, 18.70 g Additional 30/25 mm parts: 10.5 g, 14.0 g, 22.0 g, 25.0 g (one complete assembled set at 22.0 g) Typical cycle times: 7 s, 8 s, 9 s Electrical supply: 400 V, 50 Hz, 3~ + N + PE Main supply current: 191 A (auxiliary supply: 40 A) Short-circuit resistance (control cabinet): 10 kA Redsyhbd Sepfx Afasw Included peripherals: Plastic Systems granulate dryer with material hopper, mold dehumidifier, and available spare parts Supported bottle formats via preforms: 0.2 l, 0.5 l, 1.0 l Container material: PET Advanced Automation & Control Systems The machine is equipped with Husky technology for precise temperature control, shot consistency, and efficient thermal management in the 32-cavity hot runner. The injection system supports quick setups using plug-and-play cold half-molds, simplifying format and weight changes. Operator interaction is optimized via an integrated control interface for recipe management, alarm diagnostics, and process monitoring. The control cabinet is designed for industrial use, with 10 kA short-circuit resistance and clear separation of main and auxiliary power supplies. Integrated HMI for process control and monitoring Hot runner temperature control across all 32 cavities Quick-change cold half-molds, mold plate, and cooling interface Electrical: 400 V, 50 Hz, three-phase with neutral and protective earth Integration Options for Production Lines Optimized for PET preform manufacturing, this system integrates seamlessly with upstream material handling and downstream conveying to stretch blow molding machines, quality control, and packaging stations in beverage production. The included Plastic Systems granulate dryer and mold dehumidifier stabilize material and tooling conditions, improving repeatability and throughput in complete bottling and packaging plants. Inline or standalone operation for preform supply Compatible with ind...