Stroj za rezanje

CENA MAKİNE A.Ş. CBE/1/120-800 BOARD&SLAB EDGER MACHINE

Stanje: rabljeno, Leto izdelave: 2001, Wood processing dimensions: Infeed lengths min/max: 500 - 6500 mm Full optimization up to max: 1500 mm Infeed widths min/max: 40 - 300 mm Infeed thicknesses min/max: 15 - 120 mm Max. wood cross-sections: 300 x 40 mm or 200 x 120 mm Fixed lengths after saw min: 510 – 2800 mm Special application: Cutting blocks, min/max length: 100 – 200 mm (Note: Multiple block lengths during sorting; blocks are conveyed to the end of the sorting line and fall into customer-supplied mesh boxes) Cutting/trim tolerance: +/- 0.8 – 1.5 mm (depending on timber quality with minimal resin content and uniform surface. Tolerance up to 1 m fixed length; maximum tolerance for longer parts up to 2.5 m). Thickness tolerance: +/- 3 mm Wood curvature in all directions: max. 10 mm per meter length Wood species: Softwood or hardwood System performance: Feed speed, steplessly adjustable up to max. 230 m/min Cutting cycle: 0.6 – 1 s To determine actual daily output, an efficiency factor dependent on the customer’s production conditions must be applied. Working height infeed and saw: 900 mm (to be placed on customer-side platform; saw requires concrete base) Sorting working height: 2000 mm Connection data: Total electrical connection load: approx. 18 kW Operating voltage: 380 Volt / 50 Hz Voltage fluctuations max. 5 % Air consumption: approx. 1200 NL/min Operating pressure: approx. 8 bar Cgjdpfsw Sy T Hjx Afnep Extraction speed: approx. 30 m/s Paint finish: pebble grey RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Pos. 1: Infeed and marking station with 1 adjustable side support table, 1 table as stop edge Pos. 2: Support roller without drive, front-facing sheets table for easier loading Pos. 3: Length measuring station with built-in fluorescence camera to detect error markings Pos. 4: Automatic, contactless width measurement Pos. 5: Optimizing cross-cut saw OptiCut 304 – right-hand version with integrated waste chute, incl. equipment package for large wood cross-sections Graphic-capable input terminal (16 x 40 characters, numeric keypad) with software package for optimization and system control Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Pos. 6: Outfeed conveyor belt as sorting station with drive unit, length 7500 mm Pos. 7: 2 ejectors mounted on outfeed conveyor Location: Nattheim

Leto izdelave: 2011, stanje: skoraj kot novo (rabljeno), For sale is 1 roller conveyor, each including a geared motor: Technical Data: Year of manufacture: 2011 Length: 12.75 m Width: 1.40 m Height: 1.00 m Cgodpjihpn Nefx Afnop Load capacity: Up to 4 tons Geared motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (further specifications see nameplate in the image) Three of the four roller tracks have a wooden sidewall along the entire length, and one roller track has a side wooden wall with a length of 5.20 m. Two of the four roller tracks are equipped with 3 lateral removal systems each. (see pictures)

Stanje: dober (rabljeno), The debarker is perfectly suited for debarking both hardwood and softwood logs. Cgsdetuyr Ijpfx Afnsp The carriage is made of a heavy-duty steel frame. Equipped with 5 pairs of drive wheels. The milling arm is also built from a heavy-duty steel construction. Hydraulic milling head. 22 kW motor. The log infeed conveyor shown in the photos is not included in the offer and is available for an additional charge of 25,000 PLN / 5,500 EUR.

Leto izdelave: 2023, stanje: novo, Max. chipping height: 200 mm Infeed width: 500 mm Feed rollers: 3 units Rotor flight circle: 600 mm Chipping length approx.: 20–30 mm Throughput – output: 16–20 cubic meters (solid/cut wood) per hour wood chips Chipper knives: 2 units Feed motors: 2 x 2.2 kW Net weight approx.: 4,100 kg Infeed: horizontal Machine frame: steel, welded with shielding gas Rotor: steel, welded with shielding gas, dynamically balanced Bearing: oversized roller bearings Cgsdpfx Asncd Azsfnop Bearing housings: flanged steel housings Feed rollers: steel, specially toothed Chip discharge: underneath the machine Machine grate (screen): for re-shredding of oversized chips Drive pulley: matched to main motor N = 1,500 rpm Hydraulic system: consisting of a hydraulic pump, membrane accumulator, cylinder, pressure gauge, and control valves for lifting the upper feed roller Feed: via two geared motors, manufacturer NORD GETRIEBE

Stanje: pripravljen za uporabo (rabljen), Linija za predelavo desk s sledečimi stroji: Ena dvorezna robilna žaga Ena enorezna vodoravna prerazžagalna žaga (horizontalni tračni razrez) Transportni trakovi med stroji so vključeni. Cjdpfxjgwqk Ss Afnsgp

Leto izdelave: 2004, stanje: zelo dobro (rabljeno), Four-side planer - Max. planing width: 23 cm - Max. planing height: 16 cm - 2 feed rollers in the table - Chrome-plated table - Infinitely variable feed speed adjustment - 2 upper return rollers positioned before the lower spindle, plus an additional roller device for short workpieces - 4 spindles: bottom 5.5 kW, right 5.5 kW, left 5.5 kW, top 7.5 kW The machine is in very good condition, lightly used, equipped with spiral cutterheads on the bottom, right, and left, and a Tersa cutterhead on top. Cgjdpfxshlp D Nj Afnjp

Stanje: dober (rabljeno), Board Sorting Line / Sorting System / Length Sorting Line Esterer Right Discharge 5 Sorting Bins Total Length 26 Meters 1st Bin: 2 Meters 2nd Bin: 3 Meters 3rd Bin: 4 Meters 4th Bin: 5 Meters 5th Bin: >5 Meters Good condition – immediately available Location: Germany, near Landau an der Isar Cjdpfjgw Scqox Afnjgp Please also see my other listings. I look forward to your inquiry.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, MARKON log house drilling machine with undercutter Year: 1990 Manufacturer: MARKON Lathi / Finland Dimensions: Length: 3550 mm Width: 1500 mm Height: 2910 mm Motor power: Drilling unit: 6 x 3 kW Moulding machine: 1 x 5.5 kW Workpiece dimensions: Max. height: 250 mm Min. height: 130 mm Max. width: 250 mm Min. width: 60 mm Min. length: 600 mm Tool sizes and speeds: Max. drilling diameter: 40 mm Moulding machine max. diameter: 250 mm Drilling length: 325 mm Drill arm diameter: 20h7 mm Drilling speed: 2,880 rpm Moulding machine speed: 2,880 rpm AIR Extraction ports Ø 160 mm (2 ports) Drilling unit extraction port diameter: 90 mm (6 ports) Air speed at extraction port: 30 m/s Air consumption: 8,460 m³/h Electrical connection: Cgsdpfefw Rt Rex Afnep Total power: 380 V, 24 kW Compressed air connection: Min. pressure: 6 bar Air requirement per drilling cycle: 48 l, total air requirement ~2,200 l/min Includes 3.5 metre roller conveyor + 12 drilling tools

Leto izdelave: 1985, stanje: delavnici obnovljeno (rabljeno), REFORM Type AR 10 Model 40H Surface Grinding Machine Year of manufacture: 1985 30 kW grinding motor Modicon control unit 6-step magnetic control Magnet size: 1000 x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Infinitely adjustable grinding motor infeed: 0.01 mm – 0.1 mm Cgedpfx Afsd E Np Eensp Hydraulic oscillating drive New power supply cables between machine and control cabinet

Stanje: novo, Leto izdelave: 2026, A550 Vollautomatische Massivholzsäge 9 m Vollautomatisches Schneiden von mittelgroßem bis großem Vollholz mit benutzerfreundlicher Automatisierung. Legen Sie irgendein Holzstück ab und die Maschine erkennt es automatisch und schneidet es mit hochpräziser Servomotor-Materialpositionierung entsprechend den eingegebenen Zuschnittsaufträgen. Import von Excel-Auftragslisten über WLAN für effiziente Übernahme großer Schneidlisten. Ihre vollautomatische Säge kann optional als Inline-Optimierungssäge geliefert werden. Jedes aufgelegte Holzstück, ungeachtet der Länge, wird von einem Lasersensor vermessen. Unser leistungsfähiger Optimierungsalgorithmus verarbeitet Ihre Zuschnittliste und kalkuliert den optimalen Abschnittsplan, sodass der Verschnitt minimiert wird. Dieser Vorgang erfolgt in Echtzeit während des Maschinenbetriebs, ohne dass ein Eingriff Ihrerseits erforderlich ist. Ausstattung: • Vollautomatischer Schneidbetrieb mit Stangen-/Riegelzuführung und Längenzuschnitt • Einfache Benutzeroberfläche für den vollautomatischen Betrieb, Auftrag eingeben und in Sekunden schneiden • Komfortables Schneiden von Einzelteilen, Serien oder umfangreichen Excel-Listen • Bündel-/Mehrfachstangen-Schnitt und automatische Zählfunktion • Remote-Eingabe von Excel-Auftragslisten per WLAN mit umfassenden Datenzuordnungsmöglichkeiten • Vollständig einstellbare Schnitt- und Vorschubgeschwindigkeiten für maximale Produktivität • Automatischer Etikettendruck für Teile basierend auf den Auftragsdaten (manuelle Etikettenanbringung, optional) • Direktdruck auf das Material während des Durchlaufs ohne Bedienereingriff (optional) • Barcode- oder QR-Code-Druck/-Scan für Auftragsdatenerfassung (optional) • Automatisierte Servo-Einstellung des Sägegehrungswinkels bis ±75° (optional) Ideal geeignet für: • Rahmen- und Fachwerkproduktion • Fertigung von Gartenhäusern/Holzhütten • Möbelherstellung • Gehrungs-Holzkonstruktionen Csdpfx Afef Ekngsnjgp • Serienmäßiger Zuschnitt großer Holzvolumina Modell: A550 Schnittlänge: 9 m Materiallänge: 8.580 mm Schubkraft: 20–40 kg Software: Optimierer HOCHWERTIGE, IN AUSTRALIEN HERGESTELLTE MASCHINEN.