Štiristranska ravnina

Casadei SYNCRO 18

Stanje: dober (rabljeno), Leto izdelave: 2004, Universal milling machine with HEIDENHAIN TNC 124 path control mechanical handwheels swivelling tilting table ±45° hydraulic tool clamping half-enclosure coolant tank Gbodjigm Tcjpfx Adkor manual Technical specifications: X travel: 600 mm Y travel: 400 mm Z travel: 400 mm Spindle speed: 63 - 3,150 rpm Infinitely variable feed rate: 12-3000 / 6-1500 (Z) mm/min Quill stroke: 100 mm Head swivels: ±90° Spindle taper: ISO SK 40 Clamping area: 630 x 400 mm Total connected load: 8 kW Machine weight: approx. 2.2 t Space required: approx. 2 x 1.9 x 1.95 m

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2024, Completely overhauled: 2024 Control system: Siemens S7 PLC Saw blade max.: 500 mm Motor power: 4.0 kW Saw blade feed: 0–40 mm/s, infinitely adjustable Electronic saw height control Working range, square at 90° max.: 130 x 130 mm Working range, flat at 90° max.: 190 x 130 mm Working range, round at 90° max.: 170 mm The machine has been completely overhauled in-house and is in as-new condition. Gsdouiy Ngspfx Adkjbr Among other improvements, the following upgrades have been performed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI operator interface - Conversion to pusher with servo control - New electrical components - New pneumatic hoses - New pneumatic components - Conversion to valve manifold - Enhanced extraction performance - New minimum quantity lubrication system - Replacement of general wear parts - Refurbishment of the enclosure The machine is further equipped with: - Minimum quantity lubrication - Chip separator extension (for high-quality cut surfaces without return marks) - Preload magazine for careful handling of painted/anodized surfaces - Scrap piece ejection via pusher - Hinged scrap piece tray Optional features: - Magazine width: 3000 mm - Pusher length: 6000 mm - Pusher length: 8000 mm - Motor upgrade: 5.5 kW - Bar clamping device for parallel cutting of multiple workpieces - Online support connection - Delivery and commissioning at your facility - Operator training

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Gbjdpfx Ajg A D Anedkor Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Leto izdelave: 2026, stanje: novo, NEW - - Ideal for removing panels from your vertical panel storage. - Suitable for in-house transport of panels to vertical or horizontal panel saws. Gbjdpfed Tyaasx Adker - The continuously height-adjustable support surface can be precisely set to the height of your panel saw. - Panels weighing up to max. 250 kg can be transported or swiveled by a single operator. Technical data: Support height: - vertical: approx. 120 - 340 mm - horizontal: approx. 890 - 1200 mm Max. panel size: 5200 × 2100 mm Load capacity: 250 kg Location: Available ex stock 54634 Bitburg - Available immediately - Shipping within Germany: 90,- Euro net

Leto izdelave: 2023, stanje: novo, številka stroja/vozila: PRJ065955, ALZMETALL Bench Drill Machine, Drilling capacity in steel: 12mm. Chuck mount: B16 external taper, spindle stroke: 40mm, throat depth: 200mm, column diameter: 50mm, usable table surface: 300x240mm, with T-slots 2 x 12mm x 80mm, spindle–baseplate distance min./max.: 110/250mm, manual feed, machine height without options: 670mm, net weight: 64kg. - Infinitely variable speed range: 250–5000 rpm Standard features: 5" TFT LCD display with touch function: Manual entry of desired spindle speed, actual speed display, integrated drilling depth display with touch zeroing, virtual drilling depth scale on the display, machine status and warning messages on the display, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU. Single-phase motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m. Three separate buttons for clockwise, counterclockwise, and stop. Spindle locking via braking function, spindle guard with electric safety interlock, lockable main switch, emergency stop mushroom push-button (latching), stepless speed adjustment via potentiometer, IP54 protection rating, spindle guard with electric safety interlock. Coating: DD textured lacquer, signal white RAL 9003, PANTONE 7545c, black. Gsdpfjlub Rdjx Adkebr Includes the following options: LED machine light, pos. 12. Delivery time: ex stock Waiblingen Beinstein

Stanje: novo, Leto izdelave: 2025, The Multiblade or Single-shaft Multiblade Circular Saw SQUALO 515 in the LM version features an advanced system of movable blades. The machine is equipped with powered feed rollers on the worktable and powered top pressure rollers, ensuring effective all-wheel drive traction for precise and continuous transport of wood materials. In the LM (Movable Blades) configuration, the cutting unit consists of one fixed blade and a variable number of one to three movable blades. These can be dynamically positioned to accommodate various edging and multiple cutting requirements. Gbodpfx Aehpbxiodksr A distinguishing feature of this model is its expandable cutting capacity: by utilizing special arbors, the number of blades used simultaneously can be increased to up to six. It is important to note that blades mounted on these special arbors operate at a predetermined fixed distance, enabling the efficient production of components with standardized widths. This versatility allows the machine to easily switch from tasks requiring flexible blade positioning to series production with fixed cutting intervals.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2026, Compact wide belt sander with combination sanding unit Special features: - Activation and deactivation of the sanding pad from the control panel - Activation and deactivation of the roller from the control panel - Electronic control Fox 500 KTR - Table extension with 2 rollers for infeed and outfeed - Automatic table positioning with push-button control Article number: 5222100A2 Also suitable for smaller workshops for occasional use Combination sanding unit with sanding pad for fine sanding Standard equipment includes grooved steel roller Ø 120 mm for calibration Precision adjustment of working height Clearly arranged control panel at the front Robust, pipe-reinforced monoblock steel frame, robot-welded, with working units mounted high for maximum rigidity Motorized height adjustment of the working table with digital display Electronically controlled sanding belt oscillation Feed conveyor with gear motor and two speeds Natural rubber feed belt with negative profile Flexible steel pressure bar in front of the first unit Rubber pressure rollers before and after each working unit Pneumatic belt tensioning for each unit with decimal correction for grit/thickness Universally usable for solid wood and veneer thanks to combination unit Entry-level model for small businesses Working width: 950 mm Equipment details Combination unit for calibration and sanding Grooved steel roller Ø 120 mm with fine height adjustment Hard sanding pad with graphite backing Gbodpfx Asgf Sw Njdkor Universal model for calibration and sanding work on solid wood, particleboard, and veneer Technical data Product length approx. 1388 mm | Product height approx. 1668 mm Product width/depth approx. 1545 mm Extraction connection Extraction nozzle diameter: 140 mm Electrical data Connection voltage: 400V | Current type: AC Phase(s): 3Ph | Mains frequency: 50Hz Feed motor power: 0.33 / 0.55 kW | Height adjustment motor: 0.25 kW Drive motor power: 7.5 kW Sanding unit Sanding belt length: 1525 mm | Max. sanding width: 950 mm Sanding belt width: 970 mm Feed unit Feed speed: 4.5 / 9 m/min Workpiece Minimum workpiece height: 4 mm | Maximum workpiece height: 170 mm

Stanje: delavnici obnovljeno (rabljeno), Število vreten: 5 kos Delovna širina: 230 mm Višina skobljanja: 120 mm Dolžina poravnalne mize: 2500 mm Pogonski motor podajalnika: 4 kW Hitrost podajanja: 5–30 m/min Krmiljenje: spominska funkcija Weinig Powermat 400 s HSK/Powerlock, CNC-osno/radialno krmiljenje ----- Stroj je trenutno pri nas v postopku obnove! Slike pred demontažo in trenutno v procesu obnove! Kratek povzetek: ----- - 5 vreten s 8.000 obr/min - 4 x HSK/Powerlock Gbodpfx Adjyy A Iqjkor - CNC-nastavitve vreten v osni in radialni smeri preko krmiljenja - CNC-krmiljena nastavitev in pozicioniranje podajalnika - Mizne plošče z vodilnim nožem pri vretenih 2 in 3 - Vključno s povratnim sistemom Weinig/Neumann RF 15 Podroben opis: ----- Tehnični podatki: Delovna širina: 20–230 mm Delovna višina: 8–120 mm 1. Nastavek za orodje – spodaj ----- Motor z zavoro: 5,5 kW Premer vretena: 40 mm Obratov: 6.000 obr/min Krog gibanja noža: 93–145 mm Nastavitev osi: 5 mm Zaoplitvena enota MarathonCoatin za mizno vlogo pred 1. spodnjim nastavkom za orodje 2. Nastavek za orodje – PowerLock – desno ----- Motor z zavoro: 7,5 kW Skupni motor z levim nastavkom za orodje Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. premer orodja za ravnilno mejo: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno osno CNC-krmiljeno Mizne plošče z vodilnim nožem 3. Nastavek za orodje – PowerLock – levo ----- Motor z zavoro: skupni motor z 2. vretenom Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja 40 mm pod ravnino mize: 93–200 mm Krog gibanja orodja 55 mm pod ravnino mize: 93–180 mm Krog gibanja za ravne rezilne glave maks. 163 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 55 mm Vreteno CNC-krmiljeno v osni in radialni smeri Mizne plošče z vodilnim nožem 4. Nastavek za orodje – PowerLock – zgoraj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Krog gibanja za ravne rezilne glave maks.: 180 mm Maks. globina profiliranja: 35 mm Nastavitev osi: 40 mm Deljena pritisna noga pred zgornjim nastavkom za orodje, nastavljiva po krogu gibanja orodja in zložljiva, vzmetena. Pritisna noga pred in odvod po zgornjem nastavku z elektronskimi digitalnimi prikazi, integrirani v spominsko funkcijo Vreteno radialno CNC-krmiljeno 5. Nastavek za orodje – PowerLock – spodaj ----- Motor z zavoro: 7,5 kW Obratov z visoko zmogljivimi krogličnimi ležaji: 8.000 obr/min Krog gibanja orodja: 93–200 mm Maks. globina profiliranja: 15 mm Nastavitev osi: 35 mm Podajalni sistem ----- Frekvenčno krmiljen podajalnik, brezstopenjsko nastavljiv z zavoro: 4 kW, 5–30 m/min Vlečni valj pred 1. spodnjim orodjem pnevmatsko dvig/nizko krmiljen Durofer valji s koničastimi zobmi (Weinig patent) z omejevalnikom globine in samoočiščevalnimi...

Stanje: novo, Leto izdelave: 2025, Pressing area: 3000 mm x 1500 mm Operating vacuum: -0.85 bar Vacuum pump displacement: 40 m³/h Gbsdpfsi Hplkox Adksr Pump power: 1.5 kW Sound level: 70 dB Heating temperature: max. 200 °C Heating power: 16 kW Machine length: 3100 mm Machine width: 1650 mm Machine height: 1100 mm Weight: 850 kg

Leto izdelave: 1994, stanje: pripravljen za uporabo (rabljen), Control: USK-sensocon, on-site inspection is possible. Gedpjqa A Rzjfx Adksbr