Hidravlična stiskalnica

Calende 110 T Einständerpresse C Presse

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, nosilnost: 210 kg, doseg roke: 3.100 mm, Our industrial robots are thoroughly inspected, tested, and immediately ready for operation before delivery. Dedpfxewlz Dbj Ad Aeup The robot comes complete with: - Control cabinet - Teach pendant - Connection cables

Stanje: rabljeno, številka stroja/vozila: 632/6, Pressure: 30 t Dsdpfx Ascxxycsd Aoup Stroke rate: 100–600 strokes/min Sheet width: 120 mm Table size: 480 x 450 mm Bruderer precision double-roll feeder: left side Adjustable stroke: 16–40 mm Distance between columns: 330 x 300 mm Required floor space approx.: 2.10 x 1.65 x 0.75 m High-speed punching press in 3-column design, air clutch, BRUDERER precision double-roll feeder left

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: A2536805, Pressure: 40 t Stroke: 250 mm Return force: 6.3 t Motor: 5.5 kW Max. working height: 450 mm Max. rapid approach speed: 90 mm/sec Pressing speed: 10 mm/sec Travel distance - w: 250 mm Ram plate: 500 x 200 mm Table plate: 600 x 650 mm with T-slots Table cut-out: 200 x 170 mm Table height: 850 mm Oil tank: 200 l The described machine can be custom-built for you. Production lead time is approx. 5 months after receipt of payment. Rapid approach: The press moves at up to 90 mm/sec to the zero point. Positioning accuracy is 0.5 mm or better. Return: The press returns to the end point at up to 90 mm/sec. Accuracy is 0.5 mm or better. The dwell time can be adjusted from 0 to 10 seconds (in 0.1 sec increments). Pressing force is adjustable in bars, corresponding to 10 to 40 tons. Further details on the control system: Operation can be locked via a key switch. The control key switch provides the following functions: Dedpfxjfxyhfj Ad Aoup - Manual operation via two-hand control at 9.5 mm/sec in setup mode. (Stop at any desired position by releasing the switches.) - Manual operation for bending at up to 9.5 mm/sec via two-hand control, with automatic return to TDC upon releasing both buttons. - Automatic operation with safe tools at up to 200 mm/sec. This function is labeled with a warning on the control panel. In automatic mode, the machine is strictly intended for use with enclosed, safe tools only. This warning is clearly displayed on the front of the machine. In manual setup mode, the machine can also be operated via two-hand control at a maximum of 9.5 mm/sec. Bending operations can also be performed in setup mode. The key-operated selector switch allows switching between automatic and manual operation. Position adjustment for TDC and BDC, and the shift point for speed reduction, are managed by sensors adjustable on a chrome-plated rod. The sensor can be finely adjusted with a locking thread – accuracy +/- 0.5 mm. The press can be equipped with a bending blade and operated via two-hand control for sheet metal bending. In automatic mode with safe tools, it can punch, notch, and bend.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2019, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 415 mm, stružna dolžina: 850 mm, premer struženja: 390 mm, izvrtina vretena: 105 mm, največja hitrost vretena: 2.000 obr/min, potovalna razdalja osi X: 225 mm, pomik po osi Z: 950 mm, hitro pomikanje X-os: 15 m/min, hitri pomik na osi Z: 15 m/min, skupna višina: 1.980 mm, skupna dolžina: 4.600 mm, skupna širina: 1.900 mm, premer tulec: 100 mm, poteza s peresom: 120 mm, skupna masa: 7.000 kg, prehod palice: 90 mm, zunanji premer vpenjalne glave: 300 mm, proizvajalec krmilnikov: Siemens, model krmilnika: 828D + Shopturn, Oprema: dokumentacija / priročnik, Maximum turning diameter: 390 mm Z-axis travel: 950 mm Maximum spindle speed: 2,000 rpm AC spindle motor SIEMENS (continuous/15 min): 25/33 kW Bar capacity: 90 mm Spindle nose: A2-11 Including accessories, among others: SAUTER 12-station turret VDI-40 Trifix mount for driven tools C-axis with spindle clamp and stabilization Wide and robust flat guides 45° slant bed for optimal chip removal Hinged belt chip conveyor with chip bin Dedofk Et Ajpfx Ad Aoup Kitagawa 3-jaw power chuck ø 300 mm Manual tool measurement swing-in Manually adjustable hydraulic tailstock with programmable quill Coolant system with high-performance pump (4 bar) Rittal filter fan on the control cabinet

Stanje: novo, stiskalna sila: 100 t, hod: 400 mm, - Cylinder stroke 400 mm - Working width 1010 mm Dodogp Dc Repfx Ad Ajup - Movable cylinder - Electrically or manually operated - Pressure gauge - Emergency stop - 400V

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Djdog U Utvjpfx Ad Aoup Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Double-column Eccentric Press Djdpfxehlnzke Ad Ajup Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 3.178 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 667171, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.096 mm, This is a KUKA KR 210 R3100 ultra, year of manufacture 2018. We are happy to offer you the robot as a fully refurbished unit as well! The robot includes the following options: - BoardPackage - EthernetKRL - LoadDataDetermination Duedpfx Adornrpro Aop - Profinet KRC-Nexxt - RemoteService - SafeOperation - UserTech

Leto izdelave: 1993, stanje: pripravljen za uporabo (rabljen), številka stroja/vozila: Seriennummer: 9302394, CNC control HATASTAR 2000 Pressing capacity: 500 t or 5000 kN Tooling available in addition to the machine Dusdpfx Asd Egc Aed Asp Control cabinet on the left X1- + R-/ X2- + R-axis on linear guide Y1- + Y2-axis Hydraulic upper tool clamping Pneumatic sheet follower device + front stops on linear guide Second two-hand operation Universal die 100x100x5'100 mm Gooseneck blade 280 x 5'100 mm Die centering plate, b = 111 mm

Leto izdelave: 1979, stanje: rabljeno, Pressure: 160 t Upright distance: 850 mm Stroke: 400 mm Ram area: 800x700 mm Ejector stroke: 300 mm Ejector force: 20 t Table area: 800x700 mm Total power requirement: kW Machine weight approx. 12 t Space requirements approx. 1800x1800x4200 mm Sick BWS for protection and automatic/semi-automatic modes Duodpfelp Uz Rsx Ad Aep Blow-off function Ejector Mechanical fixed stop Stroke/pressure cut-off Pressure holding time Approved for manual loading operations