Brusilnik s širokim pasom

C.B. 1030 2/22

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Brandt KDF 1440 Edition Only 1,700 operating hours – very good condition – can also be supplied with preheating station XES 200 Autark (+ €4,500) SUMMARY OF UNIT CONFIGURATION: JOINTING CUTTER UNIT 2 x 2.2 kW 200 Hz GLUING UNIT QA 65 N END TRIMMING UNIT BEVEL/STRAIGHT 2 x 0.18 kW PNEUMATIC ADJUSTMENT END TRIMMING BEVEL/STRAIGHT MULTI-STAGE MILLING UNIT MS 40 OPPOSING CUTTERS PNEUMATIC 2-POINT ADJUSTMENT CONTOUR MILLING UNIT 1 x 0.35 kW WD 60; also suitable for subfloor panels PNEUM. 2-POINT ADJUSTMENT RADIUS/BEVEL MULTI-STAGE SCRAPER UNIT MZ 40 GLUE JOINT SCRAPER BUFFING UNIT Upper pressure: PU rollers instead of standard rollers Additional application unit QA 65 N (interchangeable) Release agent spraying unit for workpieces Automatic edge feed Multiple roller sensing for multi-stage milling unit MS 40 + multi-stage scraper MZ 40 Cleaning agent spraying unit WORKPIECE AND EDGE PARAMETERS: – Min. workpiece width: – For workpiece thickness 8-22mm: 70 mm* – For workpiece thickness 23-40mm: 120 mm* – For workpiece thickness 41-60mm: 150 mm* *Depending on workpiece length – Workpiece projection: 38 mm – Workpiece thickness: 8 – 60 mm – Edge height max. = workpiece height + 6 mm – Edge material, coil: 0.4 – 3 mm – Max. edge cross-section: – For PVC: 135 mm² – For veneer: 100 mm² – Max. coil diameter: 830 mm – Edge material, strips: 0.4 – 8 mm – Max. edge cross-section: – For strips: 360 mm² – Feed speed: 8 – 14 m/min – Max. feed speed with contour milling: 11 m/min – Working height: 950 mm – Pneumatic connection: min. 6 bar Gkjdpfxozb Igge Adkea – Total length: 5,573 mm Full description: see PDF

Stanje: novo, Leto izdelave: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min./max. workpiece thickness: 8 - 60 mm Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointer head Corner rounding unit (radius R = 2 mm) Quick-change device for corner rounding unit Corner rounding change motor (radius EF R = 1 mm) Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spraying Nesting function Pneumatic 3-point adjustment Multi-function milling cutter (R2/R1/chamfer) Gkjdog Tu Rkopfx Adksa Equipment for short workpieces

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: 02919475, - Manufacturer: Cefa - Model: KLEENSPRAY - Year of manufacture: 2004 - Working width: 1,200 mm - Working height: 900 mm ± 20 mm - Operator side: left - Spray gun drive: single version - Dry extraction system - Extraction nozzle diameter: 490 x 350 mm - Exhaust air capacity: 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable: 1.5 – 7 m/min - PLC control with touch screen - Number of installed spray devices: 0 pcs. - Height-adjustable spray devices - Number of paint pumps: 0 pcs. - Suitable for solvent-based paints - Suitable for water-based paints - Length: 4,450 mm - Width: 3,360 mm + 1,000 mm - Height: 2,600 mm - Total connected load: ~7.1 kW / 28.6 A - Voltage, Hz: 400 / 50 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with an offer for assembly and commissioning of the system, as well as training for your personnel. On request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us! Godpfxjv N D Ewe Adkeka

Stanje: rabljeno, številka stroja/vozila: 007135, Maks. širina plošče: 800 mm Maks. dolžina plošče: 2500 mm Povrat delov za robno lepilko: levo Gksdpfxst Hmpps Adkja

Stanje: rabljeno, številka stroja/vozila: 007227, Pozicija 1: Enostranski robni lepilni stroj HOMAG + LIGMATECH-KAL 310 + ZHR 05 Pozicija 2: Sistem za vračanje plošč HOMAG + LIGMATECH-KAL 310 + ZHR 05 Gedpowuuc Ajfx Adkjka

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Gedpjg A D Anjfx Adkoka Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, - 5-axis spindle DRIVE 5C+ 15kW Gkjdpfx Aew Dv Hzodkoa - Working area: 4200x1550mm - Tool magazine: 14 positions - Drills: 9x vertical, 2+2 horizontal - Chip conveyor - WoodWOP 6.1

Stanje: dober (rabljeno), Leto izdelave: 2019, Pretočni CNC stroj FELDER GROUP FORMAT4 CREATOR 950 (letnik 2019) z vstavljanjem lepila in moznikov, 12 kW HSK-F63 rezkalnim agregatom, integrirano Ø 120 mm žago, mozničarsko enoto in hitrimi pomiki do 90 m/min predstavlja kompaktno rešitev za natančno rezkanje, vrtanje in formatiranje lesa. Ključne tehnične prednosti - Zavzame le 5 m² prostora Idealno za delavnice z omejenim prostorom. - Enostavno vpenjanje in programiranje Hitro in intuitivno delo tudi za manj izkušene uporabnike. Gedowyvgaepfx Adkjka - Kompakten, zmogljiv in hiter Odličen za manjše delavnice, ki želijo profesionalne rezultate. Napredne funkcije - Agregat za vstavljanje lepila in moznikov - Rezkalni agregat 12 kW (do 24.000 obr./min) - Samodejno merjenje dolžine obdelovanca - Avtomatska menjava orodja (linijsko skladišče za orodja s 4 pozicijami) - Vrtanje z vseh petih strani - Izdelava utorov z integrirano žagico - Obdelava z vseh štirih strani obdelovanca - Obdelava vratnih kril Pogonska enota - Vpetje: HSK F63 - Število osi: 3 Pomiki - Pomik X osi: 3000 mm - Pomik Y osi: 950 mm - Pomik Z osi: 80 mm Orodja - Največja teža orodja: 7,5 kg Miza - Nosilnost mize: 130 kg Dodatna oprema - Paket za servisno pomoč preko interneta - Avtomatsko centralno mazanje CENA NE VKLJUČUJE DDV

Stanje: novo, Bernardo Panel Saw Topcut 3200 ER Technical Specifications Table dimensions: 1100 x 735 mm Sliding table: 3200 x 400 mm Edging length: 3200 mm Max. saw blade diameter: 400 x 30 mm Max. cutting height 90° / 45°: 125 / 88 mm Cutting width at rip fence: 1300 mm Table height: 890 mm Gkedpfed N S T Dsx Adkea Table extension: 600 x 615 mm Table widening: 825 x 750 mm Support table with roller: 1240 x 860 mm Main saw blade speed: 3000 / 4000 / 5000 rpm Scoring blade speed: 8000 rpm Scoring blade: 120 x 20 mm Extraction port diameter: 100 mm Main motor output (S1 100%): 5.5 kW (7.5 HP) Main motor power consumption (S6 40%): 7.5 kW (10.0 HP) Scoring motor output: 0.75 kW Voltage: 400 V Machine dimensions (W x D x H): 3420 x 3600 x 1610 mm Weight: approx. 850 kg Scope of delivery • Electric saw blade height adjustment • Digital cut height display • Saw blade guard with infeed roller • Mitre gauge • Eccentric clamp • Table widening • Extendable telescopic fence • Rip fence flaps • Support table with roller • Push stick • Scoring unit with independent motor • Operating tools Features • Powerful drive motor (5.5 kW) with high torque, designed for optimal cutting performance • Smooth-running double-roller carriage with central and end position locking for precise cuts • Maximum saw blade diameter of 400 mm for cutting heights up to 125 mm • Support table with roller for easy handling of larger workpieces • Fold-down rip fence with micrometric fine adjustment (advantageous for large panels) • Equipped as standard with independently driven scoring unit (motor output 0.75 kW) • Robust saw unit with dual-sided, cast-iron guided swivelling elements • Table widening for cutting widths up to 1300 mm included • All aluminium parts (sliding table, fences, etc.) are anodised • Extendable telescopic fence (up to 3200 mm) can be mounted at the front and rear of the support table, continuously adjustable from 90° to 45°

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Single-sided automatic edge banding machine with jointing unit, hotmelt adhesive application to straight workpieces (EVA/PUR glue tank with drain function optional), twin-motor HF end-trim saw station, HF combination milling unit, corner copying unit, chain feed, motorized upper pressure with encoder and double roller upper pressure with ball bearings, extendable workpiece support rail, signal lamp for workpiece sequence, integrated transport control for contactless operation of processing functions, and L-Motion (6 axes) control. Suitable for ABS, PVC, melamine, and solid wood veneer roll material, as well as fixed lengths from 0.4 – 3.0/6.0 mm and workpiece heights from 10 – 60 mm. • Two counter-rotating, program-controlled jointing units with diamond-tipped spiral cutters ensure clean, tear-free jointing of the workpieces before edge banding. • Teflon-coated, quick-change glue pot with 1.5 kg capacity; drip-free with glue reserve feeding from below (excess glue is automatically returned to the pot); precise glue application via glue roller; separate glue roller temperature setting; electronic temperature control with automatic standby function (prevents glue from burning if the machine remains on for longer periods without use). Optional: EVA/PUR glue pot with drainage/cleaning function for quick color change. Optional: Quick-change system for glue pot. • Pressure zone consisting of a driven pressure roller synchronized with the glue roller and two smaller, counter-conical pressure rollers with spring tension, providing optimal adhesion of the edge material to the workpiece. Motorized adjustment of the pressure zone (1xL-Motion). • High-frequency end-trim saw equipped with two HF motors, 0.55 kW, 12,000 rpm, 2 saw blades; pneumatically tiltable from the control panel. • HF combination milling station, two powerful 0.55 kW HF motors with carbide-tipped special cutters. Motorized adjustment of the milling station (4xL-Motion). • Corner copying unit: automatic processing of end edges up to 2 mm edge thickness for PVC/ABS edge material. (Not recommended for soft and post-formed profiles). Optional one-sided (front or rear edge) or double-sided corner copying. Motorized adjustment of the corner copying unit (1xL-Motion). • Swiveling control panel with 10" color touchscreen, meter counter, and remote access module. • Standard equipment includes LED lighting and LED-Motion system. • Optional: motorized adjustable infeed rail from the control panel (1xL-Motion). Optional finishing units (3 free slots): - Multi-radius scraper R1+R2, pneumatic ON/OFF control via air cylinder; radius selection (R1/R2) switchable from the control panel. - Surface scraper unit: removes glue residues from the workpiece surface along the glue joint with a gentle scraping cut; pneumatic ON/OFF control via air cylinder. - Buffing unit: 2 motors, 0.09 kW, 1,500 rpm, for super-finish results. Gsdpfx Ael Rix Eedkeka