Oblaganje robov

Brandt Optimat KDN 330

Stanje: rabljeno, Leto izdelave: 2006, Used machine Year of manufacture: 2006 Equipment and technical data: - with gluing unit for hot-melt adhesive granulate - Suitable for processing PU glue granulate in compliance with adhesive processing regulations - Glue reservoir located below the glue roller - Glue application to the workpiece via glue roller in both co-rotating and counter-rotating directions - with contact heating shoe for preheating the workpiece - automatic edge magazine for coil material and fixed lengths - pressure zone with pneumatically driven main pressure roller and special post-pressure rollers for compacting the upper and lower glue joint - centrally adjustable top pressure - central manual chain lubrication - control panel at machine infeed - End trimming unit: - for front and rear edge overhang; high-precision linear guide - 2 motors, each 0.18 kW - Swivel range for straight and bevel trimming 0-15 degrees - Flush trimming unit: - top and bottom with vertical and horizontal tracing - Swivel range 0-15 degrees with 2 milling motors with reversible knife combination for straight/radius Ledpfswkbd Ejx Abbsrg - Digital counters enable quick and precise, i.e. repeatable settings - Two-point pneumatic adjustment of upper and lower trimming motors - Scraper unit for finishing with horizontal/vertical tracing - Extendable workpiece support up to 350 mm - Integrated track control for contactless control of processing functions. Adjustable via keypad and LED display - Workpiece thickness: 8 - 50 mm - Edge thickness: 0.4 - 3 mm - Feed speed: approx. 9 m/min - Connected load: 4.1 kW - Compressed air connection: 6 bar Machine length: 3150 mm Weight: approx. 750 kg Availability: short-term Location: Röllbach

Stanje: rabljeno, Leto izdelave: 2016, TECHNICAL DATA AXES Max. Workpiece Dimensions X-Y-Z mm: 3050 x 800 x 50 Min. Workpiece Dimensions X-Y-Z mm: 300 x 90 x 10 Working Area Drilling/Grooving mm: 0 x 800 / 0 x 800 X-Axis Stroke mm: 750 Max. Traverse Speed X-Y Axes m/min: 25 DRILLING UNIT Vertical Spindles: - Number: 7 (4X-4Y, one shared) Horizontal Spindles (along Y-axis): - Number: 2 (1+1) Horizontal Spindle (along X-axis): - Number: 1 Fixed Grooving Saw (Direction): X Saw Blade Diameter mm: 100 Max. Saw Blade Thickness mm: 5 Motor Power kW (HP): 1.5 (2) Spindle Speed rpm: 3350 Saw Blade Speed rpm: 4300 INSTALLATION Power Supply V (Hz): 380 / 400 (50/60) Installed Power kVA: 4.5 Compressed Air Requirement bar: 6 Compressed Air Consumption Nl/cycle: 90 Extraction Requirement m³/h: 1200 Lrsdpjvvi I Rjfx Abbsg Extraction Air Speed m/sec: 20 Extraction Port Diameter mm: 80+80 F10L Drilling Unit Includes: - 7 independent vertical spindles - Drill holder D10 mm - Distance between spindles: 32 mm - 2 horizontal drilling heads: 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill holder D10 mm) - Speed: 3350 rpm - 1 integrated saw unit in X (max. diameter 100 mm) - Saw blade speed: 4300 rpm - Motor power: 1.5 kW - Vertical pneumatic stroke per spindle: 70 mm - Horizontal pneumatic stroke of drilling unit Workpiece Positioning and Drive of the Working Unit A CNC-controlled vacuum suction cup clamps and positions the workpiece sequentially under the working unit during machining. Movement along the X and Y axes is via THK rails with transmission on reinforced toothed belts. Movement in the Z axis is pneumatic on ball bushing guides, with stops adjustable via the end position. Positioning of the working units is via DC motor technology and drives. CNC CONTROL The control system is specifically designed for use in drilling and milling machines. - CN - 7" color display with touchscreen - Alphanumeric keypad - Self-diagnosis and any faults or errors displayed in the operator's language Programming - Programmed via CN - Automatic optimization of drilling operations - Option for plate zero-point shift - Option to save and import drilling programs via USB dongle - Option to import drilling programs from external CAD-CAM software Configuration - User interface in the same language as the operating manual - Graphic display of aggregate configuration Vacuum Suction Cup "B-Power" vacuum suction cup with dual vacuum connection, recommended for highly porous panels (e.g., MDF light). Machine Operating Interface Software: Xilog Maestro USB Hardware and Software Requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min.; multicore processor recommended - Memory: 1GB min., 2GB recommended - Free disk space: 5GB - Graphics card: OpenGL compatible (The package includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphical programming - Supported programming with graphical and syntax aids for drilling operations - Ability to create and save machining macros Integrated Additional Functions - Self-diagnosis and error reporting in the operator's language - User interface in

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Condition: well-maintained, regularly serviced (last maintenance by Homag in 11/2024) Equipment and technical data: - Minimum workpiece thickness: 12 mm - Maximum workpiece thickness: 60 mm - Minimum workpiece size (L×W): 240 × 55 mm (with 22 mm thickness) / 100 mm (with 60 mm thickness) - Edge thickness min: 0.3 mm (coil material) / 0.4 mm (strip material) - Edge thickness max: 3 mm (coil material) / 20 mm (strip material) - Feed speed: infinitely variable, 18–25 m/min (frequency controlled) Lsdpfxswx Aaqj Abbjrg - Adhesive type: EVA hot-melt glue - Glue application (pot / cartridge / nozzle): melting unit with granulate container - Glue capacity / cartridge size: granulate container, melting performance 18–35 kg/h, level regulated - Heat-up time: approx. 8–10 min - Edge magazine (slots): 2 rolls (automatic roll change) - Automatic edge change: yes (automatic via PC22, can be switched manually) - Pre-milling: 2 × 1.5 kW, 200 Hz, 12,000 rpm, pneumatically adjustable - Pressure zone: 1 pre-press roller Ø 150 mm + 6 post-press rollers Ø 70 mm, automatic adjustment - End trimming: cross-cutting unit HL84, 2 × 0.8 kW, pneumatically adjustable (bevel / straight) - Flush milling: via pre-milling unit, pneumatically adjustable - Radius milling: profile milling unit FK13, automatic 8-position tool changer (R = 2 mm) - Chamfer / profile milling: yes, via FK13, pneumatically adjustable - Scraper: integrated in multi-finishing unit MN21 - Polishing: buffing unit in finishing unit FA11 - Jointing unit: jointing milling unit KAL310/A20/S2, 2 × 3 kW - Workpiece preheating: available - Release agent spray unit: top / bottom, type 2929 (F.01) - Extraction ports: several Ø 100 mm (individual extraction for each unit) - Control system: powerControl PC22 (industrial PC, woodCommander on Win XP embedded) - Operating voltage: 400 V, 50 / 60 Hz - CE / standards: CE-compliant according to EC Directive 98/37/EC Dimensions / Space required: approx. 8,000 × 1,400 × 1,600 mm Weight: approx. 3,000 kg The return conveyor system shown in the pictures is not included in the scope of delivery! Availability: short-term Location: 63934 Röllbach

Leto izdelave: 2000, Stanje: rabljeno, Roofer's lift / sectional lift Böcker ES13B, year of manufacture 2000 with drive motor 1.5 kW Length: 13 meters Payload: 200 kg Available with or without car trailer Lsdpfx Aon Hxz Tjbbsrg Immediately available Location: Austria, near Vienna

Stanje: rabljeno, Leto izdelave: 1985, Edge thickness: 0.4 - 12 mm Workpiece thickness: 10 - 55 mm Minimum workpiece length: 160 mm Minimum workpiece width: 65 mm Feed rate: 13 m/min Pneumatic connection: 7 bar Total length: 5220 mm Weight: 1950 kg Heated pot with Quickmelt – hot-melt adhesive granulate Glue roller rotation for both synchronous and counter rotation Edge magazine for PVC rolls and strip edges Motorized upper pressure adjustment Pneumatically actuated pressure rollers Swiveling control panel at machine infeed All processing units are position-controlled — meaning all workpiece-actuated limit switches are omitted End trimming Milling combination for chamfer/radius milling with 2 swiveling units (1 unit with combination cutter for radius/straight, 2nd unit with chamfer cutter), with pneumatic adjustment Scraper with pneumatic adjustment Buffing Central lubrication for chain conveyor Quick-change glue container Digital counters Electronic frequency converter with integrated motor brake Edge monitoring with fault display Infrared heater CE compliant Note on used machines: Lredpfxsc Tmyge Abbog • Technical data and intermediate sale subject to change without notice. • Quoted prices are ex-works and include loading. • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any guarantee or warranty. Buyers are welcome to inspect machines at the site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: dober (rabljeno), Leto izdelave: 1990, največja širina rezanja: 1.000 mm, največja višina reza: 140 mm, dolžina mize: 1.400 mm, moč: 5,5 kW (7,48 KM), Types: F 45, Machine no.: 90-8-86 Lodstxh Nijpfx Abbjrg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, številka stroja/vozila: 248, (Fast and efficient row drilling thanks to an interchangeable 32-spindle drilling gearbox system with continuation gearboxes) (5-spindle horizontal drilling gearbox enables simultaneous drilling of hardware and wooden dowel holes) Year of manufacture: 2009 Machine number: 248 Maximum working pressure: 6 bar Depth adjustment up to 550 mm Vertical gearbox motor power: 1.6 kW Horizontal gearbox motor power: 0.75 kW Voltage: 380 V, 3-phase Feed pressure at 6 bar: 296 kg Weight without horizontal drilling unit: 95 kg Weight with horizontal drilling unit: 118 kg Chip extraction connection diameter: 100 mm Ljdst Ebibepfx Abbsrg Airflow rate: 141 m³/h Air consumption: 1.2 liters/stroke Worktable: 800 x 970 mm Recommended lower cabinet height: 950 mm Additional equipment: Extension rulers

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Lodscdrmmopfx Abberg Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Moč: 3,1 kW Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Napetost: 220/380 V 50 Hz Moč: 3,92 kW Brez krmiljenja

Stanje: rabljeno, Leto izdelave: 1997, - Edge banding unit Lredpfx Aed Inktobbeg - Cross-cutting unit - Milling unit - Fine milling unit - Scraper - Buffing unit

Stanje: dober (rabljeno), Leto izdelave: 2008, vrsta upravljanja: CNC krmiljenje, vrsta aktuacije: hidravlični, stiskalna sila: 300 t, CNC Crowning Hydraulic tool clamping EFL Easy Form Laser measuring & correction system Lredpfx Abswrza Ajbsg Set tooling Laser safety guard Controlled axes: Y1/Y2/X/R/V axis Max. bending length: 4000 mm Distance between uprights: 3150 mm Max. pressing force: 320 t Table opening (daylight): 570 mm Max. stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Approach speed: 120 mm/min Working speed: 14 mm/min Return speed: 130 mm/min X-Axis travel: 1000 mm Control system: CADMAN Power: 42 kW Length: 5800 mm Width: 2300 mm Height: 3800 mm Weight: 23,000 kg