Enostranski stroj za robove

BRANDT KDF 1230 HIGHFLEX

Stanje: rabljeno, številka stroja/vozila: 007517, Type of applied edge: thin edge, thick edge, solid wood Glue application system: EVA, hot air Jointing unit: yes Multifunction unit: yes Top milling unit: yes Max. feed speed: 18 m/min Gtjdpfx Abswuz E Re Esw Maximum panel thickness: 60 mm Working units: 9 pcs

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood: 22 mm PVC/ABS: 3 mm Feed speed up to 25 m/min Working height electronically adjustable via CNC Motorized panel support fence, electronically adjustable via CNC Anti-adhesive unit Pre-milling unit with 2 motors, electronically adjustable via CNC Coil holder plate with 1 position Gluing unit for EVA hot-melt adhesive with glue pot End trimming unit with 2 motors, featuring a dynamic extraction system that follows the blades during all movements Flush and bevel trimming unit with 2 offset motors, electronically adjustable by CNC Anti-adhesive unit Gjdpfxjwlbxls Ab Eetw Corner rounding unit, multifunction with 2 motors (bevel trimming + corner rounding) Electronic edge scraper unit, electronically adjustable by CNC Glue scraper unit "SP-501" brush unit Automatic return system for workpieces with Winner 4A bridge offload

Stanje: rabljeno, Število vreten: 10 kos. Delovna širina: 230 mm Višina skobljanja: 160 mm Motor podajalnika: 5,5 kW Podajalna hitrost: 6-36 m/min. Stružno-kalibracijski avtomat Weinig Unimat 23EL za štiristransko skobljanje in profiliranje lesa z mobilnim vretenom za samodejno nastavitev ter utornim ležiščem za kratke in ukrivljene obdelovance ter z dolgo ravnalno mizo. Vreteno 1: spodaj / 5,5 kW / 40 mm Godpfx Abjw H Iv To Ejtw Vreteno 2: desno / 11 kW / 40 mm Vreteno 3: levo / motor skupaj z vretenom 2 / 40 mm Vreteno 4: desno / 11 kW / 40 mm Vreteno 5: levo / 5,5 kW / 40 mm Vreteno 6: zgoraj / 11 kW / 40 mm Vreteno 7: spodaj / 11 kW / 40 mm Vreteno 8: zgoraj / 7,5 kW / 40 mm Vreteno 9: spodaj / 7,5 kW / 40 mm Vreteno 10: univerzalno / 4 kW / 40 mm

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, SCHEER FM 16 Panel Dividing System – DNC 3100 x 3100 As-new condition – Machine No. 33542 The SCHEER FM 16 is a powerful, electronically controlled panel dividing saw featuring state-of-the-art drive technology and intuitive controls. It has been completely overhauled and newly painted – its condition is almost as new. Ideally suited for precise, automated cutting of wood-based materials in continuous industrial operation. Main Technical Data: Cutting length: 3100 mm Saw depth / Blade projection: 80 mm Saw motor: 7.0 kW Scoring unit motor: 1.1 kW (can be switched off) Feed speed: 2 – 40 m/min (infinitely variable) Return: Rapid traverse, automatic lowering User interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 Drive system: Küenle inverter with Stöber synchronous servo drives incl. absolute encoders – for highest positioning accuracy and dynamic control Features & Special Equipment: Longitudinal cutting saw FM 16-3100 with hardened guides and automatic forward/reverse feed Material feed table HP 5021 with 6 clamp carriages, servo drive & measurement resolution of 0.05 mm Angle pressure device WP, adjustment range 2400 mm, fully automatic Trim cutting device SP 5000 for remainder cuts down to min. 5 mm Angle stop table HP 5024 (1800 x 800 mm), steel angle with phenolic overlay Workpiece support table HP 5025 (1800 x 800 mm), also with phenolic overlay Air cushion tables at the front incl. radial fan Saw blades included: KSB 4005 for main saw (ø 305 mm, Z = 60) KSB 4006 for scorer (ø 200 mm) Condition & Service: Condition: Overhauled & as new Functionality: Fully operational Warranty: 12 months Dependable for Continuous Operation: This machine is in use worldwide—even under extreme conditions. Whether in the dry climate of Africa or high humidity in Southeast Asia (e.g. Thailand): the SCHEER FM 16 reliably runs in 3-shift operations – 365 days a year – and excels with maximum precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier parts and wear parts.) Gtodeunwk Tspfx Ab Esw Flexibility & Individualization: We offer various models and equipment options—for every budget. In addition, we implement tailor-made special solutions according to your individual requirements. 📞 Contact us for a customized offer or to arrange a viewing appointment. The machine is available from stock. Delivery, commissioning, and training available on request.

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: P 04-09-002, neu U05 10 001, Venjakob HGS-K Automatic Spray Machine All images are for reference only - Manufacturer: Venjakob - Year of manufacture: 2004 - Working width: 800 mm (1000 mm) - Current condition: not overhauled - Offer price for overhauled condition - Operator side: right - Dual gun drive system - Dry extraction: 4,000 m³/h - Extraction nozzle diameter: 400 mm - Conveyor belt transport system - Feed speed steplessly adjustable: 3 - 8 m/min - With paint recovery system - Gun control: LS 1 - Installed color circuits: 1 unit - Airless spray system: 4 x Krautzberger KAA 1300 - Number of paint pumps: 1 unit Godpjumvr Tefx Ab Ejtw - Pump manufacturer: Wagner 35-70 - Suitable for solvent-based paints - Suitable for water-based paints - Total connected load: 7 kW, current rating: 17 A, fuse: 35 A - Location: in stock - Voltage fluctuations max. +/- 5 % _____ Optionally, we can also provide a quotation for installation and commissioning of the system as well as staff training. Upon request, we also offer regular maintenance and servicing of the machine. For further information, please do not hesitate to contact us!

Stanje: dober (rabljeno), BRANDT highflex 1440 Edge Banding Machine Well-equipped, available for inspection prior to purchase. - Pre-milling cutters - Glue application unit - Pneumatic pre-cutting guillotine - Pressure rollers Gtsdpfx Aot Hxxpjb Ejw - Trim saws for precise end cutting - Top and bottom milling unit (pre-milling) - 2x multifunctional finishing milling units - Profile scraper - Flat scraper - Polishing unit The machine is equipped with NC cutter control and a pneumatic package. - Max workpiece height: 60 mm - Max edge band thickness (roll): 3 mm - Max feed speed: 14 m/min The machine is well-maintained and in very good condition.

Stanje: novo, Leto izdelave: 2025, Gannomat Concept 70 Eco Lamella Case Clamp with Rapid Traverse Technical Data: Lamella case clamp from our showroom; Working range: Width from 150 to 2,500 mm, height from 150 to 1,400 mm; depth 700 mm; - Upper lamella pressure beam with 6 elements, lateral lamella pressure beam with 5 elements - Lamella pressure beams with proven tolerance compensation for tightly glued carcass joints - Counterpressure surfaces: continuous, coated support plates, 40 mm thick - Pressing force of the pressure beams is infinitely electronically adjustable via 2 potentiometers and set using a frequency converter, ensuring absolutely wear-free torque transmission. - Pressing force for horizontal pressure beams: min. 500 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Pressing force for vertical pressure beams: min. 300 daN (kg) up to infinitely adjustable max. 2,200 daN (kg) - Included Option: Gtjdpfoiidm Nox Ab Esw Rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors integrated in the pressure beams. Pressing speeds: 5/10/25 mm/sec; rapid traverse speed: 50 mm/sec. Sensors can be deactivated for special workpiece clamping. - Jog mode for precise positioning of both pressure beams, e.g., for low pressing forces, drawer boxes, and 45-degree carcasses. Simple operation via 6 separate pushbuttons. Freely adjustable pressing time pre-selection with automatic opening, loading height 300 mm. The machine is on display at our showroom and available for immediate delivery. Location: ex stock 54634 Bitburg - available immediately -

Stanje: rabljeno, Leto izdelave: 2017, številka stroja/vozila: A1711012, Pos.1 VEN CLEAN Smart Dust Removal Unit Compressed air dust removal system for cleaning workpieces to be painted, removing dust from profiled workpiece surfaces. Five rotating air blast stars are installed. These detach the dust from the surface. The loosened dust is extracted on both sides by suction ducts. An external extraction system must be provided by the customer. Technical Specifications: Length: 2,060 mm Roller pitch: 85 mm Working width: 1,300 mm Total width: 1,800 mm Drive power: 0.25 kW Exhaust air volume: 4,000 m³/h (to be provided by the customer) Compressed air consumption: 980 Nl/min Ionization as jet rod (non-EX) with compressed air nozzles, compressed air consumption 840 NL/min Pos. 2 VEN SPRAY Comfort Automatic Spray Machine - Manufacturer: Venjakob - Model: VEN SPRAY Comfort CNC 7000 - Year of construction: 2017 - Length: 4,350 mm - Working height approx. 930 mm ±20 mm - Working width: 1,300 mm - Operator side: left - Price refers to refurbished machine - Current condition: machine not refurbished - Dual gun drive - Dry extraction - Extraction nozzle diameter: 500 mm - Exhaust air capacity: 10,000 m³/h - Conveyor belt transport system Gedpfx Asu U Ryyjb Estw - Continuously adjustable feed speed: approx. 2–6 m/min - With belt cleaning system featuring tungsten carbide scraper. Complete pre-equipment is available for subsequent installation of a second washer. - Gun control, Touch Screen CNC7000 - Installed color circuits: 1 pc. (optionally expandable) - Supply air filter ceiling - Suitable for water-based paints - Suitable for solvent-based paints - Length: 4,350 mm + (2,060 mm) - Width: 3,540 mm - Height: 2,600 + 440 mm - Free-standing control cabinet - Electrical connection: 23.33 kW / 63 A - Voltage, Hz: 400 / 50 - Color: RAL 7035 - Location: in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also offer installation and commissioning of the system, as well as training for your staff. Upon request, we also offer regular maintenance and servicing of the machine. For further information, feel free to contact us!

Stanje: rabljeno, Leto izdelave: 2014, Centre d’usinage CNC Biesse Skill 12 24 G FT Année de fabrication : 2014 Numéro de machine : 60961 Porte-outil : HSK F63 10 têtes de perçage verticales 12 positions de changement d’outil Logiciel : BiesseWorks Axe X : 2465 mm Axe Y : 1260 mm Axe Z : 324 mm Démonté pour le transport sur une remorque standard ; 4500x2200x2400 mm ; poids net 2000 kg - Année de fabrication : 2014 - Documentation disponible : Oui - Certificat CE : Non - Système de serrage d’outil : HSK-F63 - Outil de perçage fourni : Oui └ Broches de perçage verticales [Nb] : 10 - Positions de changeur d’outil [Nb] : 12 - Zone de travail X [mm] : 2465 - Zone de travail Y [mm] : 1260 - Zone de travail axe Z [mm] : 324 Informations financières TVA : Le prix indiqué s’entend TVA en sus Gedpewnhanjfx Ab Eetw TVA/Régime de marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tout équipement industriel Glenn Smeets

Stanje: novo, MAIN MACHINE FEATURES: -Single-head drilling machine for drilling at 0° to 90° -Pneumatically adjustable head angle -Cast iron fences -Spindles adapted for quick-change couplings -Patented pneumatic material clamps -Cast iron worktable -Fast and precise adjustment -High-precision drilling STANDARD MACHINE EQUIPMENT: -Two 1.5 m aluminium stops (right and left) with two position stops each -Five quick-release clamps Technical specifications: Number of spindles: 21 Distance between first and last drill: 640 mm Number of pneumatic clamps: 2 Distance between spindle centers: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Spindle speed: 2800 rpm Gjdpjp Ecdgsfx Ab Eetw Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm