HC 50 (HPK 50)

Bramidan (Presto) Ballenpresse 50 t

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control Giodpfx Asvwlqqjfqjl - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 2006, Technical details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): approx. 1.9 x 2.6 x 1.0 m Machine transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Number of bending formers: 2 pcs. Bending angles: 40°, 60°, 75° Bar diameter: angle form = Ø 12 - 50 mm, double angle = Ø 12 - 35 mm Operation via control panel with touch screen Gijdpfou Ibu Rjx Afqjl Bending plate: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Pin holes: Ø 48 mm (16 pcs.) - Center pin: Ø 50 x 94 mm Stop bars: - 2 pcs., length: 840 mm - Manual adjustment: 100 mm - 13 holes, Ø 48 mm Accessories: Bending formers: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for bending plate 8x counterholders (various forms) 1x bending tray

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Giodpfsu Nw Ezjx Afqjl Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Stanje: rabljeno, Leto izdelave: 2011, številka stroja/vozila: 340000674, The HSM baler V-Press 403 is a compact solution for the efficient compaction of waste and recyclable materials. This used press delivers excellent performance and is ideal for companies looking to optimize their waste management and save space. With its robust construction and user-friendly operation, it is perfectly suited for use in a variety of industries. Technical Details: Machine no.: 6113.114 Giodpfx Aeunzn Njfqol Serial number: 340000674 Pressing force: 33 kN Power supply: 400 V / 50 Hz Dimensions: approx. 1,200 x 800 x 1,500 mm (L x W x H) Power: 1.1 kW Rated current: 2.6 A Year of manufacture: 2011 Weight: approx. 300 kg

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: nepreverjeno, skupna masa: 18.000 kg, moč: 250 kW (339,91 KM), Za kosovni odpad, palete, ostanke lesa itd. Enovretenski rezalnik z elektrohidravličnim pogonom Širina rotorja: 2500 mm Gjdpjq I Rkdofx Afqeil Premer rotorja: cca 500 mm Elektromotor: 250 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, Giodpfevgrh Uox Afqsl We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, moč: 11,03 kW (15,00 KM), skupna masa: 1.500 kg, vhodna napetost: 380 V, višina izmeta: 1.000 mm, širina odpiranja: 600 mm, dolžina rotorja: 1.000 mm, rotacijske škarje z 2 gredama – 2 motorja (15 kW in 12 kW) – obrat v primeru zastoja – drobilna komora 1100 x 900 mm – debelina novih nožev 30 mm – 4 tone – velik nalagalni lijak – možnost nalaganja. Zelo vsestranski in zmogljiv, primeren za predhodno mletje organske mase za bioplinarne, bakrene kable, grude, mavčne plošče, BA13, D3E, plastiko, les, odbijače, steklenice, kovine, votla telesa itn. Uporablja se tudi za mletje poginulih telet v kafileriji. Godeh Diwuopfx Afqjil

Stanje: pripravljen za uporabo (rabljen), Balirni stroj Hsm HL 4809 LI - Velika odprtina za polnjenje, idealna za velike škatle Gisdpfxjra Ddde Afqjl - Posoda s prekucnikom za enostavno polnjenje Pritisna sila v kN: 480 - Napetost/frekvenca: 3 x 400 V / 50 Hz - Teža bale v kg (odvisno od materiala): do 400 kg - Dimenzije bale dolžina x širina x višina v mm: 1200 x 1100 x 750 - Dimenzije stroja dolžina x širina x višina v mm: 5648 x 1849 x 2515 Trajanje praznega cikla v sekundah: 53 - Ročno vezanje: 4-krat z žico

Stanje: dober (rabljeno), A-7577 Flødetank 10.000 L Rustfri procesflødetank, dobbeltkappet, isoleret, skrabeomrører fra top, Gjdpfsh E Dp Aox Afqoil CIP-enhed monteret i toppen. 3 justerbare ben, manhole for oven. Kapacitet: 10.000 L. Vi kan tilbyde 2 stk. fra lager. Diameter: 2458 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, - Concasseur à percussion primaire, marque Laron, modèle IM 16 - Ensemble complet disponible en version mobile ou stationnaire. Giedjimwg Hspfx Afqel - Roulements du rotor neufs - Barres de percussion du rotor neuves - Platine frontale presque neuve - Capacité de production : 800 t/h - Ouverture d’alimentation : 2320 x 1700 mm. Moteur de 600 ch. - Roulements et supports neufs - Barres de percussion du rotor neuves - Alimentateur à tablier articulé : largeur 2 000 mm, longueur 10 000 mm. Réducteur et moteur 40 ch. État de l’alimentateur : quasi neuf. - Pré-tamiseur à disques : largeur 2 000 mm, diamètre 1 000 mm. Réducteur et moteur électrique. - Trémie d’une capacité de 40 m³. Assemblée boulonnée, démontable en plusieurs morceaux pour le transport. - L’ensemble est monté sur un châssis doté d’une attache pour tracteur routier et transportable sur essieux dolly. Nous disposons également de broyeurs secondaires à marteaux, de cribles et de convoyeurs pour compléter une installation clé en main.