Robot z vrtljivo roko (pokvarjena nadzorna plošča)

Bosch Rexroth turbo SCARA SR6

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm Hedpjvu Hgbofx Agujnk - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Feed rollers integrated in table Pneumatic pressure elements CE certificate Hnedpfx Agsrb An Ueusk Year of manufacture: 2003

Stanje: potreben popravila (rabljeno), Machine for turning smaller wooden pieces; the machine works with diameters from 7 to 45 mm. Hodpfxsuknznj Aguenk

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 0-260-06-0228, Foot control 1200 x 800 mm Extraction nozzle 80 mm Hnodpfoigadljx Agusk Pneumatic connection Cable + 16 A plug 1 set of operating tools 1 set of measuring rollers

Stanje: rabljeno, Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single-Piece Wood Sander Ø Sanding from below and above Ø Each with 2 staggered sanding units (top and bottom) Ø Sanding units (top and bottom) connected in series according to the precision planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finish) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper transport units Ø Oscillating belt use (during the sanding process) Ø Absolute power transmission via 5.5 kW motors and large dimensioned drive drums Ø Oxide-ceramic sanding shoe for - precise surface geometry - no readjustment required - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Hnjdpfxot Tqy Ej Aguok Stable, heavy welded construction made of thick-walled rectangular profiles with additional, statically calculated stiffeners for optimal vibration damping. Staggered sanding units with large-diameter belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust with sealing brushes and integrated sanding belt air-blast device to extend belt service life. Sanding units in robust steel plate construction serve as the base for vibration-damped, smooth belt operation. Absolutely backlash-free guidance by ball-type linear sets made of hardened and ground shafts. Height adjustment of the sanding units via hardened and ground special linear guides and preloaded carriage units. Long-term precision is ensured by dust and dirt protection of the ball linear sets and carriage units. Large-diameter presanding rollers as contact drums. Contact drums and sanding shoes are balanced relative to the sanding belt grit stress. The oversized drive drums guarantee the full power transmission of the 5.5 kW sanding motors to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation, allowing for maximum material removal. Automatic machine stop in the event of belt breakage. Optical display at the control panel and via signal light on the machine. Sanding shoes for finishing are entirely maintenance- and wear-free, made from oxide-ceramic with optimal heat dissipation. Belt tensioning is provided by appropriately sized compression springs. Belt release for belt change is done via a pneumatic unit for gentle and distortion-free installation of new belts. The upper sanding and brush units are centrally and motor-driven height adjustable, with digital display at the control panel for motorized sanding thickness adjustment. Brush and finishing device, for improved surface finish, is integrated into the base machine. Two vertically arranged special brush rollers, 150 mm Ø, run in the direction of feed. Separate height adjustment of the brush rollers on precision carriage guides allows adjustment for wear compensation. An additional transport roller is provided for ejecting or further transporting the workpiece from the sanding machine, linked to the conveyor belt. Wood guiding at the infeed area for hard, double-sided...

Leto izdelave: 1998, stanje: rabljeno, CNC COPY BAND SAW MZ MOD. UNIDUE 013 CNC - USED - NUM control system - 3 CNC axes - Cutting section: 1300x800 x h 100 mm - Cutting angle: -/+ 90° Hnsdpfx Asimwtrsguek - Wheel diameter: 900 mm - Voltage: 380V/50Hz - Serial no.: 06 - CE certified (year 1998)

Stanje: dober (rabljeno), For the fully automatic assembly of frame components. Hnodpfodhdg Isx Agusk Frame external dimensions: min. 120 x 120 mm, max. 700 x 2,500 mm

Stanje: dober (rabljeno), Product line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robot BACCI FC 8 The automatic copying, shaping, and sanding machine performs milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, and frames with top-quality finish and maximum performance. Maximum working length: 4000 mm Maximum working height: 180 mm Maximum working width: 500 mm Maximum working width with rounded end: 350 mm Maximum feed speed of the worktable: 15 m/min Hedpfxot Txfpj Agusnk Maximum return speed of the table: 50–100 m/min BACCI DOUBLE JET The DOUBLE-JET is a double processing center with 6+6 interpolated CNC axes, equipped with a hopper conveyor system for automatic loading and unloading of parts.

Stanje: dober (rabljeno), for drill spindle mount: MT 3 Drilling diameter: 10 mm Thread cutting: M 5/M 8 small/large spindle distance: 35/120 mm Hjdpfx Aod R Atcjgujnk housing diameter: 170 mm housing length: 218 mm weight:

Stanje: dober (rabljeno), Bosch Turbo Scara SR6 Swing Arm Robot The SR6/SR8 robot system features a robust robotic mechanism with four freely programmable axes. Thanks to its high speed and payload capacity (up to 8 kg), this robot is ideal for assembly operations and fast pick & place tasks. The turboscara SR6 and SR8 are four-axis swing arm robots (SCARA robots) offering the following advantages: • Minimal cycle times with maximum precision • Large working envelope and various stroke options • Defined mechanical interfaces • PC control with versatile communication capabilities • Compliant with international standards • Brushless drive technology reduces repair needs • Integrated user installation, optional: gripper for tool connector integration • Integrated safety technology (safety class 3) as standard • User power supply (24 V) in the control cabinet • The BAPS programming language is easy to learn and enables the creation of clear, comprehensible programs; new with BAPSplus: graphical programming interface • Expandable using compact, flexible I/O modules: B~IO modules or decentralized CAN I/O modules • Extendable via VTS02 valve block system with CAN connection for time-saving installation Technical Data: Rated payload: 2 kg Maximum payload: 8 kg Rated moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force: continuous/max 60/150 N Vertical force: continuous/max 200/300 N Torque (axis 4): continuous/max 5/10 Nm Weight: 48.5 kg Maximum speeds SR6 Axis 1+2: 5.9 m/s Axis 1: 350 °/s Axis 2: 480 °/s Hnsdpshtyyisfx Agusk Axis 3: (∅20 mm) 1600 mm/s Axis 3: (∅25 mm) 1200 mm/s Axis 4: 1200 °/s Cycle time (cycle 25-300-25): < 450 ms Mounted on an aluminum profile base frame. Item condition: used The robots were kept in storage at a major automotive supplier as backup replacement units; accordingly, they are in very good condition. H1R6D3 Further items – new and used – are available in our shop! International shipping costs on request!