Multi vreteno vaja & prisluškovanje glavo

nicht ersichtlich DH.10.455

Leto izdelave: 1996, stanje: dober (rabljeno), številka stroja/vozila: xxxx, High-Performance Bench Thread Tapping Machines on T-Slot Table Technical Data: - Thread tapping capacity approx. M3 – M16 - Speed range up to 500 rpm - Working area (pivot radius) 2500 mm - Quick-change tool holder, size 2, diameter 31 mm - Various inserts for quick-change tool holder - Table surface with 5 T-slots 2050 x 900 mm - Table height 910 mm Dkodjf Tcy Dopfx Abgjp - Machine vice with jaw width 200 mm - 3-jaw chuck 250 mm - Pneumatic connection with pressure regulator - Mobile base frame - Required space approx. W 2400 x H 2000 x D 1000 mm - Weight approx. 1100 kg

Stanje: novo, Leto izdelave: 2026, Drilling and Milling Machine Kudu with CNC Control and Tool Changer (3-Axis) Drilling and milling machine with a movable machining unit – the table remains stationary while the drilling head moves. The machine allows both manual and fully automatic operation. After each drilling operation, the machining unit automatically moves along the X and Y axes to the next drilling position. Operation is kept very simple. Data transfer to the machine control can be carried out via DXF/DWG file formats at a programming station. Alternatively, the machine can also be programmed directly at the control unit. The system is very robust, consisting of proven machine components. Technical Data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Sturdy machine base frame • Drilling head speed: up to 2,500 rpm (standard version), supplied with the optimal speed for your application • Tool holder: SK 40 • X, Y, and Z-axis drive via servomotors • Rapid traverse in X-axis: 20 m/min • Rapid traverse in Y-axis: 5 m/min • Distance table top – bottom of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in St. 50 (tool dependent) • Tapping: M4 - M30 (with compensating chuck) • Y-axis machining travel: 300 mm • Tolerance X-axis: ±0.1 mm • Tolerance Y-axis: 0.06 mm • Tolerance Z-axis: 0.06 mm • Drilling head drive motor: 5.5 kW • System weight: 2,300 kg • System dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light barrier Dodofu Ivzopfx Abgskp • Rear access protection via machine fence • Control: 21.5" touch screen panel, reinforced front glass • Simple programming at the machine • Milling of slots and circles • Lubrication via minimum quantity spray system • Supplied without material clamps • Remote maintenance via TeamViewer (LAN interface) • Tool magazine for drilling tools, with dimensions and speed • Simulation of workflows • Digital handwheel Your Benefits: • Gentle on workpiece surfaces • Clear, graphical interface • Machining directly at the end of the workpiece is no problem • 50% space saving compared to feed machining • Chips collected in chip tray • Simplest programming and operation • Minimum quantity spray system (standard) • Programming errors eliminated by CAD/CAM You are welcome to view the desired machine at any time in our production/demo hall. Please contact us for more information. We look forward to hearing from you! Plantec Maschinen GmbH

Stanje: zelo dobro (rabljeno), Number of sanding units: 4 pcs Sanding width: 190 mm Maximum sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2 x 180 mm, 2 x 120 mm Double-sided sanding machine Löwer DSM 2004 ----- 4-belt sanding machine + disc unit from above/below Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Exceptionally robust top model featuring innovative design details. Suitable for heavy-duty continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for rough sanding, fine sanding, and finishing, from both above and below 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and pad 3. Finishing unit with fibre brush (see special equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding pads providing excellent thermal conductivity and absolute dimensional stability - Independent cooling of sanding zones for cooler sanding results and extended abrasive belt life - Positively guided, pneumatically controlled sanding belt oscillation - Effective dust extraction directly at the sanding rollers - Ambient dust extraction at tension rollers - Integrated brushing and finishing device with large-volume dust extraction - Motorized sanding thickness adjustment via precision leadscrews and oversized linear ball bearing systems, mounted on hardened, ground precision shafts with dust and dirt protection - Adjustment of material removal below via precision leadscrew with scale ring for measurement display (resolution 0.1mm) - Sanding belt tensioning by pneumatic cylinder with constant clamping force - Quick sanding belt change with pneumatic belt release within seconds - Adjustable belt tracking for sanding belt replacement Djdpfx Ajvu Hgbebgskp - Electro-pneumatic compressed air monitoring - Infeed safety via contact roller for over-thick workpieces - Workpiece transport via calibrated, slip- and grip-resistant conveyor belts over heavy cast iron tables with finely planed surface, and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth, uniform workpiece feed - Feed gear motor with stepless speed adjustment 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (0.1 mm resolution) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1,800 mm - Sanding belt width: 200 mm - Working width: 190 mm - Sanding thickness: 2–180 mm - Four brake motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fibre brushes D 120 x 200 mm each 0.37 kW - Extraction ports: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870 mm - Length (with Softdisc: 2,740 mm), 2,600 mm - Length with control panel (with Softdisc: 3,035 mm), 2,985 mm - Width: 880 mm - Height: 1,910 mm - Weight: approx. 3,300 kg - Operating voltage: 400 V, 50 Hz, 3-phase - CE-compliant design Equipped with the following options: - Sanding belt air blast system (4-belt) via nozzles directly at the radii ...

Stanje: rabljeno, Number of spindles: 4 Dksdpfx Ajt Hw U Njbgop Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Pomiki XYZ: 625 x 450 x 400 mm, miza premera 500 x 450 mm, največja teža mize 400 kg, največja velikost obdelovanca: premer 550 mm x višina 450 mm, Dksdpsyia T Ssfx Abgop B-os nagib mize: +30°, -110°, C-os: 360 stopinj, 18,5 kW, 12000 vrt./min, BT40, 24 palet, menjalnik orodij s 120 mesti, krmiljenje Fanuc I series, transporter ostružkov,

Stanje: novo, Leto izdelave: 2022, hitrost pomika os X: 20 m/min, hitrost podajanja osi Y: 20 m/min, hitrost podajanja os Z: 15 m/min, skupna masa: 7.400 kg, hitrost vretena (min.): 4.000 obr/min, največja hitrost vretena: 10 obr/min, pomik osi Y: 1.500 mm, moč: 22 kW (29,91 KM), DYAS ploščinsko vrtalno središče - DYAS PDC-1500 Dkjdpfegbfaxsx Abgop Število vrtalnih enot: 1 vertikalna Moč motorja: 22 kW Vreteni navor: 280 Nm Hitrost vretena: 10–4000 vrt/min Avtomatska menjava orodja (ATC): 16 pozicij Največja teža obdelovanca: 760 kg Največja vrtalna zmogljivost (mm): Ø40 mm

Leto izdelave: 2019, stanje: novo, Recirculating Curing Oven Gas Furnace CGN Oven Dkedpfx Abjcw Tzxogjp Powder Coating Oven NEW SGS-800/O Gema Optiflex Width: 2500 mm / Height: 2500 mm / Depth: 12500 mm Directly from the manufacturer. For more information, see Romer-Germany

Stanje: zelo dobro (rabljeno), Four-sided planer Weinig Unimat 23 EL Working width: 230 mm Working height: 160 mm Cutterhead configuration: Bottom: 5.5 kW Right: 4 kW Left: 5.5 kW Right: 4 kW Top: 11 kW Bottom: 5.5 kW Top: 7.5 kW Bottom: 7.5 kW Feed speed adjustable via variator: 6–36 m/min Feed powered by cardan shaft Dsdpfx Aborb An Ujgjkp Feed rollers integrated in table Pneumatic pressure elements CE certificate Year of manufacture: 2003

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, X-os: 650 mm Y-os: 325 mm Z-os: 350 mm B-os: 130 stopinj C-os: 360 stopinj Vrtljaji vretena: 30.000 min⁻¹ Vpenjalni stožec vretena: HSK 50 Menjalec orodij: 60 pozicij Krmilje: Makino Professional 5 Vključuje hibridni sistem za merjenje dolžine Vključuje merilno tipalo Vključuje ca. 60 kosov vpenjal za orodja HSK 50 (MST + Rego Fix) Vreteno je bilo obnovljeno Kroglaste vretenske vodila X + Y zamenjane leta 2024 Dodpfxszapp Hs Abgokp Stroj ima trenutno ca. 32.000 obratovalnih ur vretena in je še vedno v proizvodnji Na voljo predvidoma od 46. tedna leta 2026 Ogled pod napetostjo je po dogovoru mogoč kadarkoli.

Stanje: dober (rabljeno), Leto izdelave: 2017, dolžina transportnega traku: 7.100 mm, širina transportnega traku: 2.500 mm, Length: 7100 mm Width: 2500 mm Height: 900 mm Dedowq N Sdjpfx Abgjkp