Bollegraaf HBC80K (45 kW) + transporter

Bollegraaf HBC80 (45kW) + crosswires + conveyor

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Hsdpfx Afovwlqqs Tefb Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: rabljeno, Leto izdelave: 2003, Technical details: Pressure: 40 t Hedpfx Aou Nw Ezsf Tefb Chamber opening: 1200 x 730 mm Material: Cardboard, plastic – cardboard bottles Voltage: 400 / 50 V / Hz Total power requirement: 16.4 kW Transport dimensions of the machine: 6.5 x 6.2 x 2.7 m Fully automatic hydraulic CHANNEL BALER for recycling with conveyor unit/transport belt (LxW): 4500 x 1000 mm, motor-driven with 3-fold automatic tying unit Bale counter/display Press chamber (LxWxH): 1800 x 800 x 800 mm, volume: 1.2 m³ Bale size (LxWxH): 300 – 1500 x 800 x 800 mm Bale weight: 250 – 450 kg, depending on material and bale length Filling opening (LxW): 1200 x 730 mm; filling height: 1200 mm Hopper size (LxWxH): 1200 x 1200 x 1400 mm; filling height: 2500 mm

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2015, Used injection moulding machine directly from the manufacturer! As a manufacturer, KraussMaffei is offering one of our pre-owned injection moulding machines for sale. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Tie bar spacing (h x v): 900 x 800 mm - Max. mould opening distance: 1170 mm - Min. mould installation height: 480 mm - Platen opening stroke: 1650 mm - Ejector stroke: 250 mm Hfsdpfx Afenh Rnuo Tob - Ejector force: 95 kN (Reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical Parameters - Pump drive power: 90 kW - Heating capacity: 44 kW Weight and Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m We generally deliver this system in a fully functional basic condition. As the original manufacturer, we can also offer various additional options depending on individual requirements, such as: - Upgrades for energy optimisation of the system - Integration with KraussMaffei digital products, if required - Plasticising unit conversions - Optional: Organisation and management of delivery (not included in the price) - Optional: Installation and commissioning (not included in the price) You benefit from our premium service and the option to purchase spare parts packages for wear components to ensure seamless operation of your newly acquired pre-owned system. Don't hesitate, contact us now for further information!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, obratovalne ure: 21.676 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 750 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 25.000 kg, transportna višina: 3.000 mm, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), lastna masa: 25.000 kg, volumenski pretok: 930 m³/h, obratovalni tlak: 250 letvica, Good day, We are pleased to offer you, on a non-binding basis, a used baler manufactured by Presona AB, model LP 80 VH1. The following technical data has been taken from the manufacturer's operating manual and brochures. We do not assume any liability for their accuracy or completeness. Manufacturer: Presona AB, Sweden Model: LP 80 VH1 Year of manufacture: 2007 Total operating hours: 21,676 hours (as of November 2024) Press force (main press): 78 t Specific press force: 95 N/cm² Pre-compression flap force: 28 t Feed opening dimensions: 1,500 x 1,100 mm Fill volume per press cycle: 2.7 m³ Throughput under operating conditions: 410 m³/hour Bale dimensions: 1,100 x 750 mm Drive power: 55 kW Tying: 5-fold vertical Hydraulic oil tank capacity: 1,000 L Hfsdevgrh Uopfx Af Tob Baler dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Machine weight (baler) approx. 25 t Note: The machine was used in a recycling operation for compacting paper, cardboard, and films. The baler is in good condition, will remain in operation until January 2025, and can be inspected by prior arrangement. We would be pleased if this machine is of interest to you. Your service team at Mertens & Frowein GmbH

Stanje: dober (rabljeno), Leto izdelave: 1987, Manufacturer Model: PS 8100 Height: 2,200 mm Width: 1,200 mm Length: 1,625 mm Loading height: 1,900 mm Weight: 800 kilograms Rated current at 400 V: 4.8 A Transformer rated current at 230 V: 0.38 A Motor power: 2.2 kW Fuse: 10 A, slow-blow Rotation: 13 rpm Hfsdjk E Hh Sspfx Af Teb Protection class: IP 54 Fire class: D, E Hydraulic oil: HLP 32 Bale weight (depending on material): 150–400 kg Bale volume: 1 m³

Leto izdelave: 2022, Stanje: novo, Aluminum angle conveyor belt with substructure Conveyor belt length: 1000 mm horizontal + 2400 mm inclined Incline angle at bend: 45° Discharge height: approx. 2000 mm Height at horizontal section: 300 mm top edge PPU conveyor belt FDA food compliant Conveyor belt EM 15/2 0+17 PU blue 7 white Belt width: 400 mm T20 cleats welded - pitch 202 mm * Antistatic due to filaments in the running side fabric Endless finger-spliced with stepped finger joint 30 mm high corrugated edge, both sides, high-frequency welded * Edge-free zone on both sides for belt guidance on the incline Cross arrangement: -70/+35/-5/+190/-5/+30/-70 mm Full-surface support plate Drive: Motor approx. 0.25 kW Belt speed approx. 0.3 m/sec Connection: 220/400 V, 50 Hz, protection class IP54 Our core competence is delivering precisely what the customer really needs. We collaborate with our customers to develop tailor-made, individual solutions and supply corresponding systems from our own production. Feel free to contact us by phone to find the right solution for your application. Hfjdpeht U Tdofx Af Tsb Conveyor belt, conveyor system, discharge belts, belt conveyors, magnetic separator, overband magnetic separator, recycling, wood chips, plastics, metal-free metal detection, neodymium, overband magnet, magnetic belt separator, lifting magnets, filter rods, magnetic grids, grid magnets, metal separator, block magnet, filtration systems.

Stanje: rabljeno, Leto izdelave: 2012, moč: 264 kW (358,94 KM), Stationary shredding plant M & J 4000S. Electric drive: 2 x 132 kW Hsdpfeu Dkf Dsx Af Tefb 400 V AC, 50 Hz Includes base frame, hydraulic unit, and control cabinet.

Stanje: dober (rabljeno), Leto izdelave: 1973, Waste compactor container, waste compactor, compactor container, waste container, self-compacting container, mobile waste compactor, paper compactor container, paper container - Stationary compactor for: roll-off containers Hfsdob A Ii Sjpfx Af Teb - Feed chute: covered - Compaction process: hydraulic - Compaction process: automatic - Emergency stop switch: at the feed chute - Ram dimensions: 1450 x 650 mm - Ram stroke: 1100 mm - Transport dimensions: 2100 x 4500 mm - Side screw ratchets for roll-off containers - Function tested

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Technical data for the document shredding plant: Manufacturer: HSM GmbH + Co KG General data for the two-stage shredder system: Model: Duo Shredder 5750 Year of manufacture: 2015 Operating hours: 3,093 h Throughput: up to 800 kg/hour, depending on material Rated power: 30 kW Rated current: 62 A Particle size: 6 x 40 – 53 mm Fuse: 63 A gG/gL/C/K Shredder weight: approx. 2,500 kg Pre-shredder data: Shredder type: V 570 Cutting width: 500 mm Particle size: 20 x 155 mm (W x L) Rated power (pre-shredder): 2 x 5.5 kW Rated current (pre-shredder): 2 x 11.5 A Secondary shredder data: Shredder type: P 500.2 Cutting width: 500 mm Particle size: 6 x 40 – 53 mm (W x L) Rated power (secondary shredder): 9.2 kW Rated current (secondary shredder): 18 A Security level according to DIN 66399: P-3, O-2, T-3, E-2 Baler data: Type: KP 100.1 Year of manufacture: 2015 Operating hours: 2,377 h Pressing force: 9 – 12 t Bale weight: 40 – 150 kg/bale, depending on material Cycle time: 7 – 16 sec Hsdjwrybrspfx Af Tjfb Feed opening: 450 x 580 mm Bale size: 630 x 500 x 400–1000 mm (W x H x L) Binding: triple, horizontal Baler dimensions: 3,990 x 2,225 x 1,735 mm (L x W x H) Baler weight: approx. 1,000 kg Total system dimensions (conveyor, shredder, and baler): 9,560 x 2,071 x 3,550 mm (L x W x H) Function description: This is a complete plant consisting of a feed conveyor, a two-stage shredder system, and a horizontal baler. Material is fed via the conveyor, shredded in two steps, and subsequently compressed into stackable bales. A second cutting unit and various motors are available as spare parts. Remarks: The complete documentation (operating manual, electrical/hydraulic circuit diagrams) is available. Inspection by appointment. We accept no liability for technical details or possible errors.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 71 t, širina odprtine za polnjenje: 1.080 mm, dolžina polnilne odprtine: 1.620 mm, širina bale: 1.100 mm, višina bale: 720 mm, teža bale: 600 kg, skupna širina: 3.450 mm, skupna višina: 4.090 mm, skupna dolžina: 10.020 mm, vhodna napetost: 400 V, skupna masa: 27.000 kg, raven hrupa: 85 dB, pritisk: 300 letvica, transportna višina: 2.300 mm, moč: 37 kW (50,31 KM), Vollautomatische Kanalballenpresse mit Vorpressklappe ab sofort verfügbar. Die Maschine wird inklusive Förderband mit Bodensektion geliefert. Die Ballenpresse wird in überholtem Zustand geliefert und das Förderband wurde Anfang dieses Jahres überholt. Die Maschine wurde Anfang Oktober aus der Produktion genommen und steht derzeit in unserer Halle. Die Maschine kann bei uns vor Ort in betriebsbereitem Zustand besichtigt werden. Diese Maschine ist besonders geeignet für das Pressen von Papier/Karton sowie verschiedenen Kunststoffarten wie PET, HDPE und Big Bags. Technische Daten Ballenpresse: Antrieb: 37 kW Presskraft: 71 Tonnen Ballenmaße: 1100 x 720 x 1300 mm (Länge einstellbar) Anzahl Drähte: 4 vertikal Einfülltrichter Maße: 1620 x 1080 mm Hfedpjxl Rqbsfx Af Tob Ballengewicht: bis 600 kg (materialabhängig) Durchsatzleistung: bis 20 t/h (materialabhängig) Transportgewicht: 27.000 kg Technische Daten Förderband: Länge des Horizontalteils: 3.000 mm Länge des Steigteils: 7.424 mm Winkel: 29° Befüllmöglichkeit: auf Bodenhöhe