Vijačni kompresor

BOGE S 5 ECO DR - 10 bar

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Itsdeu Rptyspfx Al Nsf Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: novo, Table length 430 mm Table width 240 mm X-travel 225 mm Y-travel 160 mm Table height 160 mm T-slots 12 mm Itodpfeupw T Rsx Al Nof Weight 45 kg Dimensions (L x W x H) 0.6 x 0.45 x 0.2 m Compound table with rotary plate

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, Atlas Copco SF8 + FF Kompresor za stisnjen zrak brez olja Rabljeni Atlas Copco SF8+FF brezoljni scroll kompresor za zrak, proizveden leta 2016. SF+ 8 več-scroll enote omogočajo prednosti in prilagodljivost modularnega sistema, ki uporablja dva do štiri kompresorske module, integrirane v eno ohišje. Krmilni sistem Elektronikon® neprestano spremlja stanje vsakega elementa ter vklaplja in izklaplja kompresijske elemente, s čimer zagotavlja, da je izhod stisnjenega zraka vedno prilagojen potrebam porabnika. Poleg tega popolna kakovost zraka in uporabniku prijazen dizajn teh enot zagotavljata vrhunski proizvodni proces. Proizvajalec: Atlas Copco Model: SF8 + FF HC Leto proizvodnje: 2016 Kapaciteta: 0,68 m3/h Instalirana moč: 7,4 kW Raven hrupa: 63 dB Itsdpsv D Haysfx Al Njf Maks. delovni tlak: 9,75 bar Dimenzije stroja D׊×V: 1.700 × 760 × 1.850 mm Teža stroja: 457 kg.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, Specialized press designed from the ground up for briquetting iron, steel, and similar alloys. Features integrated oil drip mats. No packaging table included—only briquette guides (rails). Supplied as standard with transparent bunker doors and oil heating elements. The machines are operated via Siemens KTP-400 touchscreen panels. 2nd generation available for purchase from February 2024. For this press, please contact us first! Technical specifications: Throughput: Up to 600 briquettes/hour* Main motor: 30 kW Feed motors: 2.6 kW Cooling system: 1.6 kW Total power: 34.2 kW Oil tank: 260 litres Filters: 4 Length: 2000 mm Width: 2000 mm Height: 2200 mm Weight: 3500 kg Itedpfx Aotmugcol Nef Briquette size: 40-110, D80 mm Warranty: 2 years / 2,000 operating hours

Leto izdelave: 2026, stanje: novo, The AL-KO Grinding Table AST 1.5 BASIC is the entry-level model in the AL-KO grinding table range. It is certified according to GS-HO-11 and bears the “Wood Dust Tested according to BGI 739-1” seal. This makes it suitable for manual sanding work as well as for processing workpieces with hand-held power tools. The grinding table is made of galvanized sheet steel. The extraction tray is aerodynamically optimized. Thanks to the funnel-shaped design of the tray with an integrated air duct, the airflow is specifically directed towards the suction connection. Connection to an on-site extraction system can be made via either a 140 mm or a 160 mm diameter port, depending on the required extraction capacity. The folded edges on both long sides of the working surface also allow for end-face machining of workpieces. The extraction grids are aerodynamically aligned with the suction port, ensuring optimal extraction performance. For cleaning tasks inside the grinding table, the slatted beechwood deck can be removed and the air duct can be detached by loosening just a few screws. The grinding table is delivered pre-assembled; only the legs need to be attached and adjusted to the required working height. Your benefits: • Accessible from all 4 sides • Load capacity up to 150 kg • Manual, tool-free height adjustment with scale • Offset long sides for edge sanding • Workpiece-friendly removable beechwood grid • Funnel-shaped air guidance to the suction port Technical specifications: Iedpfx Aefyadbel Njtf • Suction connection: 140/160 mm • Required extraction capacity: 1,500 m³/h • Negative pressure at the connection at 22 m/s: 1,000 Pa at Ø 140 mm / 700 Pa at Ø 160 mm • Adjustable working height: from 735 to 1,015 mm • Working area (W x L): 946 x 1,500 mm • Dimensions (W x L): 1,000 x 1,600 mm • Weight: approx. 73 kg

Stanje: skoraj kot novo (rabljeno), The MSP 120 ZK is optimally suited for the crushing and subsequent briquetting of various types of metal chips. The MSP 120 ZK briquetting press with integrated shredder consists of a hydraulic chip briquetting press and a pre-installed crusher, precisely matched to each other. This system enables the size reduction and compaction of chips generated by turning and milling operations. The volume is significantly reduced, and the briquettes are separated from the coolants (coolant emulsion, oil) absorbed during previous machining processes. The system consists of a feed hopper into which the material to be processed is loaded, and an integrated shredder that reduces the chip length. A conveyor system continuously and gradually feeds the shredded chips into the hopper of the chip press via a conveyor belt. There, two augers transport the material into the compaction chamber. The system features a monitored liquid collecting tank and a pump. The cooling fluids can be returned to the production process. Cycle control is managed by a PLC and an electronic level sensor for monitoring the fill level in the hopper. Optionally, a tipping device can be added for manual loading if required. Briquetting Press: Throughput (Aluminum): 15–20 kg/h Throughput (Steel, Copper): 45–60 kg/h Briquette Ø: 60 mm Productivity: 120–180 pcs/h Specific pressure on briquette: 1,050 kg/cm³ Motor pump power: 7 kW Total installed power: 10 kW Voltage: 400 V / 50 Hz Oil tank: 80 l Dimensions: 1,400 x 1,200 x 1,050 mm Weight: 800 kg Shredder: Cutter shaft: 1 pc Motor power: 5.5 kW Number of knives: 16 pcs Knives replaceable: Yes Knife size: 25 mm Knife material: Hardened steel Shaft length: 400 mm Screen size: 20 mm Itedew R Ranjpfx Al Nof Hopper diameter: 1,000 mm Hopper volume: 1 m³ Weight: 280 kg Power supply: 380 V Overall system dimensions: 2,820 x 1,862 x 2,065 mm Colour: Textured lacquer RAL 7035 light grey

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Panel type: Core panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed speed: 15m-50m/min, capacity: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Includes extraction system. Documentation available. On-site inspection possible. Itsdpfx Aet Amc Iel Nef

Stanje: dober (rabljeno), Leto izdelave: 2006, številka stroja/vozila: 2329200, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 33.674 h, potovalna razdalja osi X: 800 mm, pomik osi Y: 800 mm, pomik po osi Z: 800 mm, skupna masa: 11.000 kg, dolžina mize: 700 mm, širina mize: 900 mm, največja hitrost vretena: 16.000 obr/min, obremenitev mize: 800 kg,

Leto izdelave: 2022, stanje: novo, CECCATO 11kW SCREW COMPRESSOR 2022 NEW Brand new screw compressor!!! CECCATO CSA15/10 G2 (equipped with an ATLAS COPCO screw element). Itodpeiphyasfx Al Nsf Technical specifications: Capacity: 1.40 m³/min Motor power: 11 kW Pressure: 10 bar Year of manufacture: 2022 Hours: 0!!! The compressor is brand new and fully operational! Service support provided.

Stanje: pripravljen za uporabo (rabljen), Dolžina 6000 mm Širina 2500 mm Skupna potrebna moč / kW Brez PC-ja in programske opreme Itsdjud Il Sepfx Al Nef DxŠ: 6000x2500 mm brez vakuumske plošče Izvedba po DIN876/II